1998©
Document No. D16155EJ2V0DS00 (2nd edition)
Date Published April 2002 N CP(K)
Printed in Japan
SILICON TRANSISTOR
2SD2402
NPN SILICON EPITAXIAL TRANSISTOR
FOR LOW-FREQUENCY POWER AMPLIFIERS AND MID-SPEED SWITCHING
DATA SHEET
2002
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
The 2SD2402 is a transistor featuring high current
capacitance in small dimension. This transistor is ideal for
DC/DC converters and motor drivers.
FEATURES
• High current capacitance
• Low collector saturation voltage
• Complementary transistor with 2SB1571
PACKAGE DRAWING (UNIT: mm)
ABSOLUTE MAXIMUM RATINGS (Ta = 25°
°°
°C)
Parameter Symbol Conditions Ratings Unit
Collector to base voltage VCBO 50 V
Collector to emitter voltage VCEO 30 V
Emitter to base voltage VEBO 6.0 V
Collector current (DC) IC(DC) 5.0 A
Collector current (pulse) IC(pulse) PW ≤ 10 ms
duty cycle ≤ 50 %
8.0 A
Base current (DC) IB(DC) 0.2 A
Base current (pulse) IB(pulse) PW ≤ 10 ms
duty cycle ≤ 50 %
0.4 A
Total power dissipation PT16 cm2 × 0.7 mm ceramic board mounted 2.0 W
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
Data Sheet D16155EJ2V0DS
2
2SD2402
ELECTRICAL CHARACTERISTICS (Ta = 25°
°°
°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Collector cutoff current ICBO VCB = 50 V, IE = 0 100 nA
Emitter cutoff current IEBO VEB = 6.0 V, IC = 0 100 nA
DC current gain hFE1 VCE = 1.0 V, IC = 1.0 A 80 −
DC current gain hFE2 VCE = 1.0 V, IC = 2.0 A 100 200 400 −
DC base voltage VBE VCE = 1.0 V, IC = 0.1 A 600 650 700 mV
Collector saturation voltage VCE(sat)1 IC = 3.0 V, IB = 0.15 A 140 300 mV
Collector saturation voltage VCE(sat)2 IC = 5.0 V, IB = 0.25 A 230 500 mV
Base saturation voltage VBE(sat) IC = 3.0 V, IB = 0.15 A 0.88 1.2 V
Gain bandwidth product fTVCE = 10 V, IE = −0.5 A 170 MHz
Output capacitance Cob VCB = 10 V, IE = 0, f = 1 MHz 60 pF
Turn-on time ton 275 ns
Storage time tstg 485 ns
Fall time tf
IC = 2.0 A, VCC= 10 V
IB1 = −IB2 = 0.1 A
RL = 500 Ω
45 ns
hFE CLASSIFICATION
Marking EX EY EZ
hFE2 100 to 200 160 to 320 200 to 400
Data Sheet D16155EJ2V0DS 3
2SD2402
TYPICAL CHARACTERISTICS (Ta = 25°
°°
°C)
Data Sheet D16155EJ2V0DS
4
2SD2402
Data Sheet D16155EJ2V0DS 5
2SD2402
[MEMO]
2SD2402
M8E 00. 4
The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
•
•
•
•
•
•
