(R) SEM ICON DU CTO R 20A SCHOTTKY BARRIER DIODE Dual High Voltage Schottky Rectifier Specification Features: 1 High Voltage Wide Range Selection, 100V, 150V & 200V 2 3 High Switching Speed Device TO-220AB Low Forward Voltage Drop Low Power Loss and High Efficiency Guard Ring for Over-voltage Protection High Surge Capability RoHS Compliant 1. Anode Matte Tin(Sn) Lead Finish 2. Cathode 3. Anode POLARITY CONFIGURATION Terminal Leads Surface is Corrosion Resistant and can withstand to 260C Wave Soldering or per MIL-STD-750, Method 2026. DEVICE MARKING DESIGNATION: Line 1 & 2 = Device Name Line 3 = Datecode Line 4 = Polarity MAXIMUM RATINGS (Per Leg, unless otherwise specified ) Symbol VRRM VRWM VR Parameter TCMBR20100CT TCMBR20150CT TCMBR20200CT Units 100 150 200 V Maximum Repetitive Reverse Voltage Working Peak Reverse Voltage Maximum DC Reverse Voltage Average Rectified Forward Current Per Leg Per Package Non-repetitive Peak Forward Surge Current 8.3mS Single Phase @ Rated Load Storage Temperature Range IF(AV) IFSM TSTG TJ 10 20 A 150 A -65 to +175 C +175 C Operating Junction Temperature These ratings are limiting values above which the serviceability of the diode may be impaired. THERMAL CHARACTERISTICS Symbol TA = 25C unless otherwise noted Parameter Value Units 2.0 C/W Maximum Thermal Resistance, RJC Junction-to-Case ELECTRICAL CHARACTERISTICS (Per Diode ) Symbol Parameter IR Reverse Current VF Forward Voltage Note/s: 1. Test Condition TA = 25C unless otherwise noted TCMBR20100CT TCMBR20150CT TCMBR20200CT (Note 1) Min Max Min Max Min Max @ rated VR --- 200 --- 200 --- 200 IF = 10A IF = 20A 0.800 --- 0.850 --- 0.900 A 0.900 --- 0.950 Units V 1 Tested under pulse condition of 300S. Number: DB-028 September 2009 Release, Revision D Page 1 TCMBR20100CT through TCMBR20200CT TAK CHEONG TAK CHEONG (R) SEM ICON DU CTO R TO220 PACKAGE OUTLINE DIM MILLIMETERS MIN MAX INCHES MIN MAX A 3.6 4.8 0.142 0.189 A1 1.2 1.4 0.047 0.055 0.114 A2 2.0 2.9 0.079 b 0.4 1.0 0.016 0.039 b2 1.2 1.8 0.047 0.071 0.024 c 0.36 0.6 0.014 D 14.2 16.5 0.559 0.650 e 2.34 2.74 0.092 0.108 E 9.7 10.6 0.382 0.417 H1 5.8 6.85 0.228 0.270 L 12.7 14.7 0.500 0.579 L1 2.7 3.3 0.106 0.130 OP 3.5 4.0 0.138 0.157 Q 2.54 3.4 0.100 0.134 NOTE: Above package outline conforms to JEDEC TO-220AB. Number: DB-028 September 2009 Release, Revision D Page 2 TAK CHEONG (R) DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong's sales office for further assistance. Number: DB-100 April 14, 2008 / A