2N5684 (PNP), 2N5686 (NPN) High-Current Complementary Silicon Power Transistors These packages are designed for use in high-power amplifier and switching circuit applications. Features http://onsemi.com 50 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 60-80 VOLTS, 300 WATTS *High Current Capability - IC Continuous = 50 Amperes *DC Current Gain - hFE = 15-60 @ IC = 25 Adc *Low Collector-Emitter Saturation Voltage VCE(sat) = 1.0 Vdc (Max) @ IC = 25 Adc *Pb-Free Packages are Available* MARKING DIAGRAM MAXIMUM RATINGS (Note 1) Rating Collector-Emitter Voltage Symbol Value Unit VCEO 80 Vdc Collector-Base Voltage VCB 80 Vdc Emitter-Base Voltage VEB 5.0 Vdc IC 50 Adc Collector Current - Continuous Base Current IB 15 Adc Total Power Dissipation @ TC = 25C Derate above 25C PD 300 1.715 mW mW/C Operating and Storage Temperature Range TJ, Tstg -65 to +200 C 2N568xG AYYWW MEX TO-204 (TO-3) CASE 197A STYLE 1 2N568x THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction-to-Case qJC 0.584 C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Indicates JEDEC Registered Data. PD, POWER DISSIPATION (WATTS) 300 G A YY WW MEX ORDERING INFORMATION Device 2N5684G 250 2N5686 200 = Device Code x = 4 or 6 = Pb-Free Package = Location Code = Year = Work Week = Country of Orgin 2N5686G 150 Package Shipping TO-3 (Pb-Free) 100 Units/Tray TO-3 100 Units/Tray TO-3 (Pb-Free) 100 Units/Tray 100 50 0 0 20 40 60 80 100 120 140 TEMPERATURE (C) 160 180 200 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Figure 1. Power Derating Safe Area Curves are indicated by Figure 5. All limits are applicable and must be observed. (c) Semiconductor Components Industries, LLC, 2007 October, 2007 - Rev. 12 1 Publication Order Number: 2N5684/D 2N5684 (PNP), 2N5686 (NPN) IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) (Note 2) Characteristic Symbol Min Max Unit VCEO(sus) 80 - Vdc ICEO - 1.0 mAdc - 2.0 10 OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (Note 3) (IC = 0.2 Adc, IB = 0) Collector Cutoff Current (VCE = 40 Vdc, IB = 0) Collector Cutoff Current ICEX (VCE = 80 Vdc, VEB(off) = 1.5 Vdc) (VCE = 80 Vdc, VEB(off) = 1.5 Vdc, TC = 150_C) mAdc Collector Cutoff Current (VCB = 80 Vdc, IE = 0) ICBO - 2.0 mAdc Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) IEBO - 5.0 mAdc 15 5.0 60 - - 1.0 5.0 ON CHARACTERISTICS DC Current Gain (Note 3) hFE (IC = 25 Adc, VCE = 2.0 Vdc) (IC = 50 Adc, VCE = 5.0 Vdc) Collector-Emitter Saturation Voltage (Note 3) - VCE(sat) (IC = 25 Adc, IB = 2.5 Adc) (IC = 50 Adc, IB = 10 Adc) Base-Emitter Saturation Voltage (Note 2) Base-Emitter On Voltage (Note 2) Vdc (IC = 25 Adc, IB = 2.5 Adc) VBE(sat) - 2.0 Vdc (IC = 25 Adc, VCE = 2.0 Vdc) VBE(on) - 2.0 Vdc fT 2.0 - MHz pF DYNAMIC CHARACTERISTICS Current-Gain - Bandwidth Product (IC = 5.0 Adc, VCE = 10 Vdc, f = 1.0 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, f = 0.1 MHz) 2N5684 2N5686 Cob - 2000 1200 (IC = 10 Adc, VCE = 5.0 Vdc, f = 1.0 kHz) hfe 15 - Small-Signal Current Gain 2. Indicates JEDEC Registered Data. 3. Pulse Test: Pulse Width v 300 s, Duty Cycle v 2.0%. VCC -30 V RL +2.0 V TO SCOPE tr 20 ns 0 RB tr 20ns 1.0 0.7 0.5 -12V DUTY CYCLE 2.0% VCC TO SCOPE tr 20 ns 0 RB tr 20ns 10 to 100 s -30 V RL +10V -12V t, TIME (s) 10 to 100 s VBB tr 0.3 0.2 td 0.1 0.07 0.05 0.03 0.02 TJ = 25C IC/IB = 10 VCC = 30 V 0.01 0.5 0.7 1.0 +4.0 V 2N5684 (PNP) 2N5686 (NPN) DUTY CYCLE 2.0% FOR CURVES OF FIGURES 3 & 6, RB & RL ARE VARIED. INPUT LEVELS ARE APPROXIMATELY AS SHOWN. FOR NPN CIRCUITS, REVERSE ALL POLARITIES. 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (AMP) Figure 3. Turn-On Time Figure 2. Switching Time Test Circuit http://onsemi.com 2 30 50 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) 2N5684 (PNP), 2N5686 (NPN) 1.0 0.7 0.5 D = 0.5 0.3 0.2 0.2 P(pk) JC(t) = r(t) JC JC = 0.584C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN t1 READ TIME AT t1 t2 TJ(pk) - TC = P(pk) JC(t) DUTY CYCLE, D = t1/t2 0.1 0.1 0.07 0.05 0.05 0.02 0.03 0.02 0.01 SINGLE PULSE 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 t, TIME (ms) 20 50 100 200 500 1000 2000 Figure 4. Thermal Response IC, COLLECTOR CURRENT (AMP) 100 20 10 5.0 2.0 1.0 0.5 100 s 500 s 50 dc 5.0 ms There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate I C - V CE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. 1.0 ms TJ = 200C SECOND BREAKDOWN LIMITED BONDING WIRE LIMITED THERMALLY LIMITED @ TC = 25C (SINGLE PULSE) CURVES APPLY BELOW RATED VCEO The data of Figure 5 is based on T J(pk) = 200_C; T C is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided T J(pk) v 200_C. T J(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 0.2 0.1 1.0 2N5684, 2N5686 2.0 3.0 20 30 50 70 100 5.0 7.0 10 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 5. Active-Region Safe Operating Area 4.0 t, TIME (s) 2.0 ts 5000 TJ = 25C IB1 = IB2 IC/IB = 10 VCE = 30 V TJ = 25C 3000 C, CAPACITANCE (pF) 2N5684 (PNP) 2N5686 (NPN) 3.0 1.0 0.8 0.6 0.4 tf Cib 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (AMP) 30 500 0.1 50 Figure 6. Turn-Off Time Cob Cib 1000 700 0.3 0.2 0.5 0.7 1.0 2000 2N5684 (PNP) 2N5686 (NPN) 0.2 Cob 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance http://onsemi.com 3 50 100 2N5684 (PNP), 2N5686 (NPN) PNP 2N5684 NPN 2N5686 500 500 TJ = +150C VCE = 2.0 V VCE = 10 V +25C 100 70 +25C 100 70 -55C 50 30 20 10 7.0 5.0 0.5 0.7 1.0 VCE = 2.0 V VCE = 10 V TJ = +150C 300 200 hFE, DC CURRENT GAIN hFE, DC CURRENT GAIN 300 200 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (AMP) 30 50 -55C 30 20 10 7.0 5.0 0.5 0.7 1.0 50 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (AMP) 30 50 VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 8. DC Current Gain 2.0 2.0 TJ = 25C IC = 10 A 40 A 25 A 1.2 IC = 10 A 25 A 40 A 1.2 0.8 0.8 0.4 0.4 0 TJ = 25C 1.6 1.6 0.1 0.2 0.5 1.0 2.0 3.0 IB, BASE CURRENT (AMP) 5.0 10 0 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IB, BASE CURRENT (AMP) 5.0 10 20 30 50 Figure 9. Collector Saturation Region 2.5 2.0 TJ = 25C TJ = 25C 1.6 V, VOLTAGE (VOLTS) V, VOLTAGE (VOLTS) 2.0 1.5 1.0 VBE(sat) @ IC/IB = 10 VBE @ VCE = 2.0 V 0.5 1.2 0.8 VBE(sat) @ IC/IB = 10 VBE @ VCE = 2.0 V 0.4 VCE(sat) @ IC/IB = 10 VCE(sat) @ IC/IB = 10 0 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 0 0.5 0.7 50 IC, COLLECTOR CURRENT (AMP) 1.0 2.0 3.0 5.0 10 IC, COLLECTOR CURRENT (AMP) Figure 10. "On" Voltages http://onsemi.com 4 2N5684 (PNP), 2N5686 (NPN) PACKAGE DIMENSIONS TO-204 (TO-3) CASE 197A-05 ISSUE K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. A N C -TE D U DIM A B C D E G H K L N Q U V K 2 PL 0.30 (0.012) V SEATING PLANE T Q M M Y M -Y- L 2 H G B 1 MILLIMETERS MIN MAX 38.86 REF 25.15 26.67 6.35 8.51 1.45 1.60 1.53 1.77 10.92 BSC 5.46 BSC 11.18 12.19 16.89 BSC 19.31 21.08 3.84 4.19 30.15 BSC 3.33 4.77 STYLE 1: PIN 1. BASE 2. EMITTER CASE: COLLECTOR -Q0.25 (0.010) INCHES MIN MAX 1.530 REF 0.990 1.050 0.250 0.335 0.057 0.063 0.060 0.070 0.430 BSC 0.215 BSC 0.440 0.480 0.665 BSC 0.760 0.830 0.151 0.165 1.187 BSC 0.131 0.188 M T Y M ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com http://onsemi.com 5 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. 2N5684/D