To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FOD2711A — Optically Isolated Error Amplifier
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0
June 2010
FOD2711A
Optically Isolated Error Amplifier
Features
■Optocoupler, precision reference and error amplifier in
single package
■1.240V ± 1% reference
■CTR 100% to 200%
■5,000V RMS isolation
■UL approval E90700, Volume 2
Applications
■Power supplies regulation
■DC to DC converters
Description
The FOD2711A Optically Isolated Amplifier consists of
the popular AZ431L precision programmable shunt ref-
erence and an optocoupler. The optocoupler is a gallium
arsenide (GaAs) light emitting diode optically coupled to
a silicon phototransistor. The reference voltage toler-
ance is 1%. The current transfer ratio (CTR) ranges from
100% to 200%.
It is primarily intended for use as the error amplifier/
reference voltage/optocoupler function in isolated AC to
DC power supplies and dc/dc converters.
When using the FOD2711A, power supply designers can
reduce the component count and save space in tightly
packaged designs. The tight tolerance reference elimi-
nates the need for adjustments in many applications.
The device comes in a 8-pin dip white package.
Functional Bock Diagram Package Outlines
8
8
1
8
1
1
1
2
3
4 5
6
7
8LED
FB
COMP
GND
NC
C
E
NC
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 2
FOD2711A — Optically Isolated Error Amplifier
Pin Definitions
*The compensation network must be attached between pins 6 and 7.
Typical Application
Pin Number Pin Name Pin Description
1NCNot connected
2CPhototransistor Collector
3EPhototransistor Emitter
4NCNot connected
5 GND Ground
6 COMP Error Amplifier Compensation. This pin is the output of the error amplifier.*
7FBVoltage Feedback. This pin is the inverting input to the error amplifier
8 LED Anode LED. This pin is the input to the light emitting diode.
VO
V1
R1
R2
2
3
8
6
7
5
PWM
Control
FAN4803
FOD2711A
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 3
FOD2711A — Optically Isolated Error Amplifier
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Notes:
1. Derate linearly from 25°C at a rate of 2.42mW/°C
2. Derate linearly from 25°C at a rate of 1.42mW/°C.
3. Derate linearly from 25°C at a rate of 2.42mW/°C.
Symbol Parameter Value Units
T
STG
Storage Temperature -40 to +125 °C
T
OPR
Operating Temperature -40 to +85 °C
T
SOL
Lead Solder Temperature 260 for 10 sec. °C
V
LED
Input Voltage 13.2 V
I
LED
Input DC Current 20 mA
V
CEO
Collector-Emitter Voltage 30 V
V
ECO
Emitter-Collector Voltage 7 V
I
C
Collector Current 50 mA
PD1 Input Power Dissipation
(1)
145 mW
PD2 Transistor Power Dissipation
(2)
85 mW
PD3 Total Power Dissipation
(3)
145 mW
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 4
FOD2711A — Optically Isolated Error Amplifier
Electrical Characteristics
(T
A
= 25°C unless otherwise specified)
Input Characteristics
Output Characteristics
Transfer Characteristics
Notes:
4. The deviation parameters V
REF(DEV)
and I
REF(DEV)
are defined as the differences between the maximum and
minimum values obtained over the rated temperature range. The average full-range temperature coefficient of the
reference input voltage,
∆
V
REF
, is defined as:
where
∆
T
A
is the rated operating free-air temperature range of the device.
5. The dynamic impedance is defined as |Z
OUT
| =
∆
V
COMP
/
∆
I
LED
. When the device is operating with two external
resistors (see Figure 2), the total dynamic impedance of the circuit is given by:
Symbol Parameter Test Conditions Min. Typ.* Max. Unit
V
F
LED Forward Voltage I
LED
= 10mA, V
COMP
= V
FB
(Fig. 1) 1.5 V
V
REF
Reference Voltage V
COMP
= V
FB
, I
LED
= 10mA (Fig.1)
-40°C to +85°C 1.221 1.259 V
25°C 1.228 1.240 1.252
V
REF (DEV)
Deviation of V
REF
Over
Temperature
(4)
T
A
= -40 to +85°C 4 12 mV
∆
V
REF
/
∆
V
COMP
Ratio of Vref Variation
to the Output of the Error
Amplifier
I
LED
= 10 mA, V
COMP
= V
REF
to 12V
(Fig. 2)
-1.5 -2.7 mV/V
I
REF
Feedback Input Current I
LED
= 10mA, R1 = 10k
Ω
(Fig. 3) 0.15 0.5 µA
I
REF (DEV)
Deviation of I
REF
Over
Temperature
(4)
T
A
= -40°C to +85°C 0.15 0.3 µA
I
LED (MIN)
Minimum Drive Current V
COMP
= V
FB
(Fig. 1) 55 80 µA
I
(OFF)
Off-State Error Amplifier
Current
V
LED
= 6V, V
FB
= 0 (Fig. 4) 0.001 0.1 µA
| Z
OUT
| Error Amplifier Output
Impedance
(5)
V
COMP
= V
FB
, I
LED
= 0.1mA to 15mA,
f<1 kHZ)
0.25
Ω
Symbol Parameter Test Conditions Min. Typ. Max. Unit
I
CEO
Collector Dark Current V
CE
= 10V (Fig. 5) 50 nA
BV
ECO
Emitter-Collector Voltage Breakdown I
E
= 100µA 7 V
BV
CEO
Collector-Emitter Voltage Breakdown I
C
= 1.0mA 70 V
Symbol
Parameter
Test Conditions Min. Typ. Max. Unit
CTR Current Transfer Ratio I
LED
= 10mA, V
COMP
= V
FB
,
V
CE
= 5V (Fig. 6)
100 200 %
V
CE
(SAT)
Collector-Emitter Saturation
Voltage
I
LED
= 10mA, V
COMP
= V
FB,
I
C
= 2.5mA (Fig. 6)
0.4 V
∆VREF ppm/°C()
VREF DEV()
/VREF TA25°C=(){}106
×
∆TA
-----------------------------------------------------------------------------------------------------=
ZOUT, TOT =∆V
∆I
--------Z
OUT 1R1
R2
--------+×≈
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 5
FOD2711A — Optically Isolated Error Amplifier
Electrical Characteristics
(Continued) (T
A
= 25°C unless otherwise specified)
Isolation Characteristics
Switching Characteristics
Notes:
6. Device is considered as a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
7. Common mode transient immunity at output high is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode impulse signal, Vcm, to assure that the output will remain high. Common mode transient
immunity at output low is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common pulse
signal,Vcm, to assure that the output will remain low.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
I
I-O
Input-Output Insulation
Leakage Current
RH = 45%, T
A
= 25°C, t = 5s,
V
I-O
= 3000 VDC
(6)
1.0 µA
V
ISO
Withstand Insulation
Voltage
RH
≤
50%, T
A
= 25°C, t = 1 min.
(6)
5000 Vrms
R
I-O Resistance (Input to Output) VI-O = 500 VDC(6) 1012 Ω
Symbol Parameter Test Conditions Min. Typ. Max. Unit
BW Bandwidth (Fig. 7) 10 kHZ
CMHCommon Mode Transient
Immunity at Output HIGH
ILED = 0mA, Vcm = 10 VPP,
RL = 2.2kΩ(7) (Fig. 8)
1.0 kV/µs
CMLCommon Mode Transient
Immunity at Output LOW
ILED = 1mA, Vcm = 10 VPP,
RL = 2.2kΩ(7) (Fig. 8)
1.0 kV/µs
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 6
FOD2711A — Optically Isolated Error Amplifier
Test Circuits
I(LED)
V(LED)
VCOMP
VCOMP
ICEO
VCE
VREF
VCE
I(LED)
VF
VREF VREF
82
3
2
3
VV
V
6
7
5
I(LED)
I(LED) IC
I(OFF)
IREF
8
6
2
3
2
3
2
3
V
V
7
5
8
6
7
5
8
6
7
5
8
6
2
3
7
5
R1
8
6R1
R2
7
5
Figure 1. V
REF
, V
F,
I
LED
(min.) Test Circuit
Figure 3. I
REF
Test Circuit
Figure 5. I
CEO
Test Circuit Figure 6. CTR, V
CE(sat)
Test Circuit
Figure 4. I
(OFF)
Test Circuit
Figure 2. ∆V
REF /
∆V
COMP
Test Circuit
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 7
FOD2711A — Optically Isolated Error Amplifier
Test Circuits (Continued)
3
2
1
4
8
7
6
AB
5
3
4
2
1
6
5
7
8
VCC = +5V DC
VCC = +5V DC
IF = 10mA
IF = 0mA (A)
IF = 10mA (B)
VIN
0.47V
0.1 VPP
47Ω
VOUT
VOUT
VCM
10VP-P
R1
2.2kΩ
RL
1µf
+
_
Figure 7. Frequency Response Test Circuit
Figure 8. CMH and CML Test Circuit
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 8
FOD2711A — Optically Isolated Error Amplifier
Typical Performance Curves
VCOMP – CATHODE VOLTAGE (V)
-1 0 1 2
Fig. 9b LED Current vs. Cathode Voltage
ILED – SUPPLY CURRENT (mA)
-150
-100
-50
0
50
100
150
TA = 25°C
VCOMP
= VFB
Fig. 10 Reference Voltage vs. Ambient Temperature
TA – AMBIENT TEMPERATURE (°C)
-40 -20 0 20 40 60 80 100
VREF – REFERENCE VOLTAGE (V)
1.230
1.232
1.234
1.236
1.238
1.240
1.242
1.244 ILED =
Fig. 11 Reference Current vs. Ambient Temperature
TA – AMBIENT TEMPERATURE (°C)
IREF – REFERENCE CURRENT (nA)
120
-40 -20 0 20 40 60 80 100
140
160
180
200
220
240
260
280
Fig. 12 Off-State Current vs. Ambient Temperature
TA – AMBIENT TEMPERATURE (°C)
-40 -20 0 20 40 60 80 100
IOFF – OFF-STATE CURRENT (NA)
0.1
1
10
100
1000 VCC = 13.2V
ILED = 10mA
R1 = 10 kΩ
10mA
Fig. 9a LED Current vs. Cathode Voltage
VCOMP – CATHODE VOLTAGE (V)
-1.0 -0.5 0.0 0.5 1.0 1.5
I
LED
– SUPPLY CURRENT (mA)
-15
-10
-5
0
5
10
15
TA = 25°C
VCOMP = VFB
VF – FORWARD VOLTAGE (V)
Fig. 13 Forward Current vs. Forward Voltage
IF – FORWARD CURRENT (mA)
5
10
15
20
25°C
0°C
70°C
0.9 1.0 1.1 1.2 1.3 1.4
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 9
FOD2711A — Optically Isolated Error Amplifier
Typical Performance Curves (Continued)
TA – AMBIENT TEMPERATURE (°C)
0102030405060708090100
Fig. 15 Collector Current vs. Ambient Temperature
IC – COLLECTOR CURRENT (mA)
0
5
10
15
20
25
30
ILED = 1mA
ILED = 5mA
ILED = 10mA
ILED = 20mA
VCE
TA – AMBIENT TEMPERATURE (°C)
Fig. 14 Dark Current vs. Ambient Temperature
ICEO – DARK CURRENT (nA)
VCE = 10V
-40 -20 0 20 40 60 80 100
0.1
1
10
100
1000
10000
Fig. 16 Current Transfer Ratio vs. LED Current
ILED – FORWARD CURRENT (mA)
10501520253035404550
(IC/IF) – CURRENT TRANSFER RATIO (%)
40
60
80
100
120
140
0°C
25°C
70°C
VCE = 5V
Fig. 17 Saturation Voltage vs. Ambient Temperature
TA – AMBIENT TEMPERATURE (°C)
-40 -20 0 20 40 60 80 100
VCE(SAT) – SATURATION VOLTAGE (V)
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
= 5V
Fig. 18 Collector Current vs. Collector Voltage
VCE – COLLECTOR-EMITTER VOLTAGE (V)
012345678910
IC – COLLECTOR CURRENT (mA)
0
5
10
15
20
25
30
35
ILED = 1mA
ILED = 5mA
ILED = 10mA
ILED = 20mA
TA = 25°C
Fig. 19 Rate of Change Vref to Vcomp vs. Temperature
-40-60 -20 0 20 40 60 80 100 120
TEMPERATURE (°C)
DELTA VREF / DELTA VCOMP ( mV/V)
-1.6
-1.4
-1.2
-1.0
-0.8
-0.6
-0.4
-0.2
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 10
FOD2711A — Optically Isolated Error Amplifier
Typical Performance Curves (Continued)
Fig. 20 Voltage Gain vs. Frequency
1010.1 100 1000
VOLTAGE GAIN (dB)
0
-5
-15
-10
RL = 100Ω
RL = 500Ω
RL = 1kΩ
FREQUENCY (kHZ)
VCC = 10V
IF = 10mA
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 11
FOD2711A — Optically Isolated Error Amplifier
The FOD2711A
The FOD2711A is an optically isolated error amplifier. It
incorporates three of the most common elements neces-
sary to make an isolated power supply, a reference volt-
age, an error amplifier, and an optocoupler. It is
functionally equivalent to the popular AZ431L shunt volt-
age regulator plus the CNY17F-3 optocoupler.
Powering the Secondary Side
The LED pin in the FOD2711A powers the secondary
side, and in particular provides the current to run the
LED. The actual structure of the FOD2711A dictates the
minimum voltage that can be applied to the LED pin: The
error amplifier output has a minimum of the reference
voltage, and the LED is in series with that. Minimum volt-
age applied to the LED pin is thus 1.24V + 1.5V = 2.74V.
This voltage can be generated either directly from the
output of the converter, or else from a slaved secondary
winding. The secondary winding will not affect regula-
tion, as the input to the FB pin may still be taken from the
output winding.
The LED pin needs to be fed through a current limiting
resistor. The value of the resistor sets the amount of cur-
rent through the LED, and thus must be carefully
selected in conjunction with the selection of the primary
side resistor.
Feedback
Output voltage of a converter is determined by selecting
a resistor divider from the regulated output to the FB pin.
The FOD2711A attempts to regulate its FB pin to the
reference voltage, 1.24V. The ratio of the two resistors
should thus be:
The absolute value of the top resistor is set by the input
offset current of 0.8µA. To achieve 1% accuracy, the
resistance of RTOP should be:
Compensation
The compensation pin of the FOD2711A provides the
opportunity for the designer to design the frequency
response of the converter. A compensation network may
be placed between the COMP pin and the FB pin. In
typical low-bandwidth systems, a 0.1µF capacitor may
be used. For converters with more stringent require-
ments, a network should be designed based on mea-
surements of the system’s loop. An excellent reference
for this process may be found in “Practical Design of
Power Supplies” by Ron Lenk, IEEE Press, 1998.
Secondary Ground
The GND pin should be connected to the secondary
ground of the converter.
No Connect Pins
The NC pins have no internal connection. They should
not have any connection to the secondary side, as this
may compromise the isolation structure.
Photo-Transistor
The Photo-transistor is the output of the FOD2711A. In a
normal configuration the collector will be attached to a
pull-up resistor and the emitter grounded. There is no
base connection necessary.
The value of the pull-up resistor, and the current limiting
resistor feeding the LED, must be carefully selected to
account for voltage range accepted by the PWM IC, and
for the variation in current transfer ratio (CTR) of the
opto-isolator itself.
Example: The voltage feeding the LED pins is +12V, the
voltage feeding the collector pull-up is +10V, and the
PWM IC is the Fairchild KA1H0680, which has a 5V ref-
erence. If we select a 10KΩ resistor for the LED, the
maximum current the LED can see is:
(12V–2.74V) / 10kΩ = 926µA.
The CTR of the opto-isolator is a minimum of 100%, and
so the minimum collector current of the photo-transistor
when the diode is full on is also 926µA. The collector
resistor must thus be such that:
select 10kΩ to allow some margin.
RTOP
RBOTTOM
--------------------------VOUT
VREF
-------------- 1–=
VOUT 1.24–
RTOP
-------------------------------- 8 0 µA>
10V 5V–
RCOLLECTOR
----------------------------------- 9 2 6 µA or RCOLLECTOR 5.4KΩ;><
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 12
FOD2711A — Optically Isolated Error Amplifier
Ordering Information
Marking Information
Option Example Part Number Description
No Option FOD2711A Standard Through Hole
S FOD2711AS Surface Mount Lead Bend
SD FOD2711ASD Surface Mount; Tape and Reel
T FOD2711AT 0.4" Lead Spacing
V FOD2711AV VDE0884
TV FOD2711ATV VDE0884; 0.4” Lead Spacing
SV FOD2711ASV VDE0884; Surface Mount
SDV FOD2711ASDV VDE0884; Surface Mount; Tape and Reel
1
2
6
43 5
Definitions
1Fairchild logo
2Device number
3VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4Two digit year code, e.g., ‘03’
5Two digit work week ranging from ‘01’ to ‘53’
6Assembly package code
2711A
BYY
XXV
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD2711A Rev. 1.0.0 13
FOD2711A — Optically Isolated Error Amplifier
Carrier Tape Specifications
Reflow Profile
Symbol Description Dimension in mm
WTape Width 16.0 ± 0.3
tTape Thickness 0.30 ± 0.05
P0Sprocket Hole Pitch 4.0 ± 0.1
D0Sprocket Hole Diameter 1.55 ± 0.05
E Sprocket Hole Location 1.75 ± 0.10
FPocket Location 7.5 ± 0.1
P24.0 ± 0.1
PPocket Pitch 12.0 ± 0.1
A0Pocket Dimensions 10.30 ±0.20
B010.30 ±0.20
K04.90 ±0.20
W1Cover Tape Width 1.6 ± 0.1
dCover Tape Thickness 0.1 max
Max. Component Rotation or Tilt 10°
R Min. Bending Radius 30
d
0
P
t2
D0
1
1
W
User Direction of Feed
0
K
B0
A0W
E
D
F
P
P
• Peak reflow temperature: 260 C (package surface temperature)
• Time of temperature higher than 183 C for 160 seconds or less
• One time soldering reflow is recommended
245 C, 10–30 s
Time (Minute)
0
300
250
200
150
100
50
0
0.5 1 1.5 2 2.5 3 3.5 4 4.5
Temperature (°C)
Time above 183 C, <160 sec
Ramp up = 2–10 C/sec
260 C peak
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC