VS-1N5819, VS-1N5819-M3 www.vishay.com Vishay Semiconductors Schottky Rectifier, 1.0 A FEATURES * Low profile, axial leaded outline * High frequency operation Cathode Anode * Very low forward voltage drop * High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance DO-204AL * Guard ring for enhanced ruggedness and long term reliability * Compliant to RoHS Directive 2002/95/EC PRODUCT SUMMARY Package DO-204AL (DO-41) IF(AV) 1A * Designed and qualified for commercial level * Halogen-free according to IEC 61249-2-21 definition (-M3 only) VR 40 V VF at IF 0.55 V IRM max. 12 mA at 125 C TJ max. 150 C Diode variation Single die EAS See Electrical table DESCRIPTION The VS-1N5819... axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS CHARACTERISTICS SYMBOL IF(AV) Rectangular waveform VRRM IFSM tp = 5 s sine VF 1 Apk, TJ = 25 C TJ Range VALUES UNITS 1.0 A 40 V 225 A 0.55 V - 40 to 150 C VOLTAGE RATINGS SYMBOL PARAMETER VR Maximum DC reverse voltage VS-1N5819 VSS-1N5819-M3 UNITS 40 40 V VRWM Maximum working peak reverse voltage ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current See fig. 4 IF(AV) Maximum peak one cycle non-repetitive surge current See fig. 6 IFSM Revision: 21-Sep-11 TEST CONDITIONS VALUES 50 % duty cycle at TL = 90 C, rectangular waveform 1.0 5 s sine or 3 s rect. pulse 225 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied UNITS A 35 Document Number: 94614 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-1N5819, VS-1N5819-M3 www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS TJ = 25 C 2A Maximum forward voltage drop See fig. 1 VFM (1) Maximum junction capacitance Typical series inductance Maximum voltage rate of change IRM (1) 0.9 1A 0.55 TJ = 125 C 3A 0.79 TJ = 25 C 1.0 TJ = 100 C VR = Rated VR mA 6.0 12 CT VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C 60 LS Measured lead to lead 5 mm from package body Rated VR V 0.63 TJ = 125 C dV/dt UNITS 0.73 3A 2A Maximum reverse leakage current See fig. 2 VALUES 0.6 1A pF 8.0 nH 10 000 V/s VALUES UNITS - 40 to 150 C 80 C/W Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to lead RthJL (1) TEST CONDITIONS DC operation See fig. 4 Approximate weight Marking device Case style DO-204AL (DO-41) 0.33 g 0.012 oz. 1N5819 Note (1) Mounted 1" square PCB, thermal probe connected to lead 2 mm from package Revision: 21-Sep-11 Document Number: 94614 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-1N5819, VS-1N5819-M3 www.vishay.com Vishay Semiconductors Allowable Lead Temperature (C) IF - Instantaneous Forward Current (A) 10 1 T = 150 C T = 125 C T = 25 C 140 DC 120 100 80 Square wave (D = 0.50) Rated VR applied 60 see note (1) 40 0.1 0 0.2 0.4 0.6 0.8 1 0 1.2 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 94614_01 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 IF(AV) - Average Forward Current (A) 94614_04 Fig. 4 - Typical Allowable Lead Temperature vs. Average Forward Current 100 0.8 10 Average Power Loss (W) IR - Reverse Current (mA) 160 TJ = 150 C 1 TJ = 125 C 0.1 0.01 TJ = 25 C 0.001 0.6 RMS Limit D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC DC 0.4 0.2 0.0001 0 0 10 20 30 40 VR - Reverse Voltage (V) 94614_02 0 20 30 40 50 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 94614_03 IFSM - Non-Repetitive Surge Current (A) CT - Junction Capacitance (pF) 10 10 1.5 Fig. 5 - Forward Power Loss Characteristics 100 0 1 Average Forward Current - IF(AV) (A) 94614_05 Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 0.5 1000 100 94614_06 At Any Rated Load Condition And With rated VRRM Applied Following Surge 10 10 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 6 - Typical Non-Repetitive Surge Current Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR (1) Revision: 21-Sep-11 Document Number: 94614 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-1N5819, VS-1N5819-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 1N5819 TR -M3 1 2 3 4 1 - Vishay Semiconductors product 2 - Part number: 1N5819 = 1 A, 40 V 3 - TR = Tape and reel package None = Bulk package 4 - Environmental digit None = Lead (Pb)-free and RoHS compliant -M3 = Halogen-free, RoHS compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY VS-1N5819 1000 1000 PACKAGING DESCRIPTION Bulk VS-1N5819TR 5000 5000 Tape and reel VS-1N5819-M3 1000 1000 Bulk VS-1N5819TR-M3 5000 5000 Tape and reel LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95241 Part marking information www.vishay.com/doc?95304 Packaging information www.vishay.com/doc?95338 Revision: 21-Sep-11 Document Number: 94614 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors Axial DO-204AL (DO-41) DIMENSIONS in millimeters (inches) 2.70 (0.106) DIA. 2.29 (0.090) Cathode band 27.0 (1.06) MIN. (2 places) 5.21 (0.205) MAX. 27.0 (1.06) MIN. (2 places) 1.27 (0.050) MAX. Flash (2 places) 5.21 (0.205) MAX. 0.86 (0.034) DIA. 0.72 (0.028) (2 places) 0.86 (0.034) DIA. 0.72 (0.028) (2 places) 2.70 (0.106) DIA. 2.29 (0.090) Revision: 29-Aug-11 Document Number: 95241 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000