www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.026/02/13
Surface Mount
Switching Diode
Features:
• Fast Switching Speed
• Surface Mount Package Ideally Suited for Automatic Insertion
• For General Purpose Switching Applications
• High Conductance
SOT-23
Applications:
• High Speed Switching Application
Maximum Ratings:
Ratings at 25°C unless otherwise specied.
Parameter Symbol Value Unit
Repetitive peak reverse voltage VRRM 250 V
Working peak reverse voltage
DC reverse voltage
VRWM
VR200 V
RMS reverse voltage VR(RMS) 141 V
Forward continuous current (Max.) IFM 400 mA
Peak forward surge current at t=1μs
at t=100μs
at t=10ms
IFSM
9
3
1.7
A
Repetitive peak forward surge current IFRM 625 mA
Power dissipation PD350 mW
Thermal resistance junction to ambient air RθJA 357 °C/W
Operating and storage temperature range Tj,TSTG -65 to +150 °C
BAV23C-7-F
BAV23S-7-F
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.026/02/13
Surface Mount
Switching Diode
Typical Characteristics:
Ta = 25°C unless otherwise specied
Electrical Characteristics:
Ratings at 25°C unless otherwise specied
Parameter Symbol Test conditions Min. Max. Unit
Reverse breakdown voltage V(BR) IR= 100μA 250 - V
Reverse leakage current IRVR=200V - 100 nA
Forward voltage VFIF=100mA
IF=2000mA -1
1.25 V
Total capacitance CTVR=0V f=1MHz 5 pF
Reverse recovery time trr IF=IR=30mA Irr=0.1 × IR
RL=100Ω - 50 nS
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.026/02/13
Surface Mount
Switching Diode
SOT-23
Dim. Min. Max.
A 2.7 3.1
B 1.1 1.5
C1 Typ.
D0.4 Typ.
E 0.35 0.48
G 1.8 2
H 0.02 0.1
J0.1 Typ.
K 2.2 2.6
Dimensions : Millimetres
Package Outline:
Plastic surface mounted package
www.element14.com
www.farnell.com
www.newark.com
Page <4> V1.026/02/13
Surface Mount
Switching Diode
Part Number Table
Description Part Number
Surface Mount Switching Diode BAV23C-7-F
BAV23S-7-F
Soldering Footprint:
Package Information:
Device Package Shipping
BAV23C-7-F &
BAV23S-7-F SOT-23 3,000 / Tape & Reel
Dimensions : Millimetres
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
