Cree XLamp XR-C LEDs (R) (R) Product Description The XLamp XR-C Characteristics - White, Royal Blue, Blue, Green................................... 2 and performance to create the blue, blue, green, amber, Characteristics - Amber, Red-Orange, next generation of LED lighting redorange & red Red.............................................. 2 Maximum drive current: up Flux Characteristics - White............. 3 to 700 mA Flux Characteristics - Color.............. 3 Low thermal resistance: as Relative Spectral Power Distribution.. 5 low as 12 C/W Relative Flux vs. Junction Max junction temperature: Temperature.................................. 6 150 C Electrical Characteristics.................. 7 Industry-leading JEDEC Relative Flux vs. Current................. 8 standard pre-qualification Typical Spatial Distribution............... 9 the gives * Table of contents to 10,000 K CCT), royal designers LED FEATURES Available in white (2600 K lighting flexibility products. XLamp XR-C LEDs feature * electrically neutral thermal path, low thermal resistance and support * for a wide range of drive currents. * Cree XLamp LEDs bring high performance and quality of light to a * wide range of lighting applications, including color-changing, portable and personal, directional, and CLD-DS10 Rev 11B Product family data sheet outdoor, indoor- transportation, studio, commercial * stage and * emergency-vehicle lighting. * testing Thermal Design.............................10 Reflow solderable - JEDEC Reflow Soldering Characteristics......11 JSTD020C compatible Notes...........................................12 Electrically neutral thermal Mechanical Dimensions..................14 path Tape and Reel...............................15 Lumen maintenance of Dry Packaging and Packaging..........16 greater than 70% after www.cree.com/Xlamp 50,000 hours * RoHS and REAChcompliant * UL-recognized component (E349212) Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp xr-c leds Characteristics - White, Royal Blue, Blue, Green Characteristics Unit Thermal resistance, junction to solder point Minimum Typical C/W 12 Viewing angle (FWHM) - white degrees 90 Viewing angle (FWHM) - royal blue, blue, green degrees 100 mV/C -4.0 Temperature coefficient of voltage ESD classification (HBM per Mil-Std-883D) DC forward current Maximum Class 2 mA 500 Reverse voltage V 5 Forward voltage (@ 350 mA) - white, royal blue, blue V 3.5 4.0 Forward voltage (@ 350 mA) - green V 3.7 4.0 Forward voltage (@ 500 mA) - white, royal blue, blue V 3.6 LED junction temperature* C 150 * Note: For lumen maintenance data, see the Cree XLamp LED Reliability document. Characteristics - Amber, Red-Orange, Red Characteristics Unit Thermal resistance, junction to solder point Minimum Typical C/W 15 degrees 90 Temperature coefficient of voltage - red-orange, red mV/C -2.3 Temperature coefficient of voltage - amber mV/C -1.8 Viewing angle (FWHM) ESD classification (HBM per Mil-Std-883D) Maximum Class 2 DC forward current - red-orange, red mA 700 DC forward current - amber mA 350 Reverse voltage V 5 Forward voltage (@ 350 mA) V 2.2 Forward voltage (@ 700 mA) - red-orange, red V 2.4 LED junction temperature* C 2.5 150 * Note: For lumen maintenance data, see the Cree XLamp LED Reliability document. Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 2 XLamp xr-c leds Flux Characteristics (TJ = 25 C) - White The following tables describe the available colors and flux for XR-C LEDs by listing the correlated color temperature range for the entire family and by providing several base order codes. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XR Family Binning and Labeling document. Base Order Codes Min Luminous Flux (lm) CCT Range Color Min. Cool White 5,000 K Neutral White 3,700 K Warm White 2,600 K Max. Order Code Group Flux (lm) N3 56.8 XRCWHT-L1-0000-00501 N4 62.0 XRCWHT-L1-0000-00601 P2 67.2 XRCWHT-L1-0000-00701 P3 73.9 XRCWHT-L1-0000-00801 P4 80.6 XRCWHT-L1-0000-00901 Q2 87.4 XRCWHT-L1-0000-00A01 N3 56.8 XRCWHT-L1-0000-005E4 N4 62.0 XRCWHT-L1-0000-006E4 P2 67.2 XRCWHT-L1-0000-007E4 P3 73.9 XRCWHT-L1-0000-008E4 P4 80.6 XRCWHT-L1-0000-009E4 M3 45.7 XRCWHT-L1-0000-003E7 N2 51.7 XRCWHT-L1-0000-004E7 N3 56.8 XRCWHT-L1-0000-005E7 N4 62.0 XRCWHT-L1-0000-006E7 P2 67.2 XRCWHT-L1-0000-007E7 10,000 K 5,000 K 3,700 K Notes: * Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements and 2 on CRI measurements. * Typical CRI for Cool White & Neutral White (3,700 K - 10,000 K CCT) is 75. * Typical CRI for Warm White (2,600 K - 3,700 K CCT) is 80. Flux Characteristics (TJ = 25 C) - Color Dominant Wavelength Range Min. Color Royal Blue Max. Group DWL (nm) Group DWL (nm) D3 450 D5 465 Base Order Codes Min. Radiant Flux (mW) Order Code Group Flux (mW) 12 250 XRCROY-L1-0000-00701 13 300 XRCROY-L1-0000-00801 Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 3 XLamp xr-c leds Flux Characteristics (TJ = 25 C) - Color (continued) Dominant Wavelength Range Min. Color Blue Max. Group DWL (nm) Group DWL (nm) B3 465 B4 475 Dominant Wavelength Range Min. Color Green Max. Group DWL (nm) Group DWL (nm) G2 520 G4 535 Dominant Wavelength Range Min. Color Group Amber Max. DWL (nm) A2 585 Group DWL (nm) A3 595 Dominant Wavelength Range Min. Color RedOrange Max. Group DWL (nm) Group DWL (nm) O3 610 O4 620 Dominant Wavelength Range Min. Color Group Red R2 Max. DWL (nm) 620 Group R3 DWL (nm) 630 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) G 13.9 XRCBLU-L1-0000-00G01 H 18.1 XRCBLU-L1-0000-00H01 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) M 39.8 XRCGRN-L1-0000-00M01 N 51.7 XRCGRN-L1-0000-00N01 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) J 23.5 XRCAMB-L1-0000-00J01 K2 30.6 XRCAMB-L1-0000-00K01 M2 39.8 XRCAMB-L1-0000-00M01 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) K2 30.6 XRCRDO-L1-0000-00K01 M2 39.8 XRCRDO-L1-0000-00M01 Base Order Codes Min. Luminous Flux (lm) Order Code Group Flux (lm) J 23.5 XRCRED-L1-0000-00J01 K2 30.6 XRCRED-L1-0000-00K01 M2 39.8 XRCRED-L1-0000-00M01 Note: Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy) measurements, 2 on CRI measurements and 1 nm on dominant wavelength measurements. Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 4 XLamp xr-c leds Relative Spectral Power Distribution White Relative Spectral Power Distribution relative radiant Power (%) 100 80 60 5000K - 10000K CCT 3700K - 5000K CCT 2600K - 3700K CCT 40 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) White Color relative radiant Power (%) 100 80 Royal Blue 60 Blue Green Amber 40 Red-orange Red 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) Color Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 5 XLamp xr-c leds Relative Flux vs. Junction Temperature (If = 350 mA) Relative Flux vs. Junction Temperature (IF = 350 mA) 100% relative luminous flux 90% 80% 70% 60% White 50% Blue 40% Green 30% 20% 10% 0% 25 50 75 100 125 150 Junction temperature (c) 100% relative luminous flux 90% 80% 70% 60% 50% Amber 40% Red-orange 30% Red 20% 10% 0% 25 50 75 100 125 150 Junction temperature (c) 100% relative radiant flux 90% 80% 70% 60% 50% Royal 40% 30% 20% 10% 0% 25 50 75 100 125 150 Junction temperature (c) Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 6 XLamp xr-c leds Electrical Characteristics (Tj = 25C) White, Royal Blue, Blue & Green Electrical Characteristics (TJ = 25 C) forward current (ma) 500 400 300 Green White, Royal Blue & Blue 200 100 0 0.0 1.0 Amber 2.0 3.0 4.0 5.0 forward voltage (v) forward current (ma) 400 300 200 Amber 100 0 0.0 Red-Orange, Red 1.0 2.0 3.0 4.0 5.0 forward voltage (v) 700 forward current (ma) 600 500 400 Red-orange & Red 300 200 100 0 0.0 1.0 2.0 3.0 4.0 5.0 forward voltage (v) Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 7 XLamp xr-c leds Relative Flux vs Current (Tj = 25C) Relative Flux vs. Current (TJ = 25 C) relative luminous flux (%) 140 120 100 White, Blue & Royal 80 Green 60 40 20 0 0 100 200 300 400 500 forward current (ma) relative luminous flux (%) 120 100 80 60 Amber 40 20 0 0 100 200 300 400 forward current (ma) relative luminous flux (%) 250 200 150 Red-orange 100 Red 50 0 0 100 200 300 400 500 600 700 forward current (ma) Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 8 XLamp xr-c leds Typical Spatial Distribution Typical Spatial Distribution relative luminous intensity (%) 120 100 80 White Royal Blue, Blue & Green 60 Amber, Red-orange & Red 40 20 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 angle () Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 9 XLamp xr-c leds Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. Given an existing thermal resistance of 12 C/W or 15 C/W between the junction and the solder point, it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to Thermal Design optimize lamp life and optical White,characteristics. Royal Blue, Blue & Green 600 White Royal Blue Blue Green maximum current (ma) 500 400 300 Rj-a = 15C/W Rj-a = 25C/W Rj-a = 35C/W 200 100 0 0 25 Amber 50 75 100 125 150 125 150 125 150 ambient temperature (c) Amber maximum current (ma) 400 300 200 Rj-a = 20C/W Rj-a = 30C/W Rj-a = 40C/W 100 0 0 25 Red-Orange, Red 50 75 100 ambient temperature (c) 800 Red-Orange Red maximum current (ma) 700 600 500 400 Rj-a = 20C/W Rj-a = 30C/W Rj-a = 40C/W 300 200 100 0 0 25 50 75 100 ambient temperature (c) Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 10 XLamp xr-c leds Reflow Soldering Characteristics In testing, Cree has found XLamp XR-C LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3 C/second max. 3 C/second max. Preheat: Temperature Min (Tsmin) 100 C 150 C Preheat: Temperature Max (Tsmax) 150 C 200 C 60-120 seconds 60-180 seconds 183 C 217 C 60-150 seconds 60-150 seconds 215 C 260 C 10-30 seconds 20-40 seconds 6 C/second max. 6 C/second max. 6 minutes max. 8 minutes max. Average Ramp-Up Rate (Tsmax to Tp) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5 C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25 C to Peak Temperature Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 11 XLamp xr-c leds Notes Lumen Maintenance Projections Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/LM80_results. Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/lumen_ maintenance for more details on Cree's lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity XLamp LEDs are shipped in sealed, moisture-barrier bags (MBB) designed for long shelf life. If XLamp LEDs are exposed Temp. to moist environments after opening the MBB packaging but before soldering, damage to the LED may occur during the soldering operation. The following derating table defines the Maximum Percent Relative Humidity 30% 40% 50% 60% 70% 80% 90% 30 C 9 5 4 3 1 1 1 25 C 12 7 5 4 2 1 1 20 C 17 9 7 6 2 2 1 maximum exposure time (in days) for an XLamp LED in the listed humidity and temperature conditions. LEDs with exposure time longer than the time specified below must be baked according to the baking conditions listed below. Cree recommends keeping XLamp LEDs in their sealed moisture-barrier packaging until immediately prior to use. Cree also recommends returning any unused LEDs to the resealable moisture-barrier bag and closing the bag immediately after use. Baking Conditions It is not necessary to bake all XLamp LEDs. Only the LEDs that meet all of the following criteria must be baked: * LEDs that have been removed from the original MBB packaging. * LEDs that have been exposed to a humid environment longer than listed in the Moisture Sensitivity section above. * LEDs that have not been soldered. LEDs should be baked at 80 C for 24 hours. LEDs may be baked on the original reels. Remove LEDs from MBB packaging before baking. Do not bake parts at temperatures higher than 80 C. This baking operation resets the exposure time as defined in the Moisture Sensitivity section above. Storage Conditions XLamp LEDs that have been removed from original MBB packaging but not soldered yet should be stored in a room or cabinet that will maintain an atmosphere of 25 5 C and no greater than 10% RH (relative humidity). For LEDs stored in these conditions, storage time does not add to exposure time as defined in the Moisture Sensitivity section above. Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 12 XLamp xr-c leds notes - continued RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. Vision Advisory Claim WARNING: Do not look at exposed lamp in operation. Eye injury can result. See LED Eye Safety at www.cree.com/ xlamp_app_notes/led_eye_safety. Intellectual Property For remote phosphor applications, a separate license to certain Cree patents is required. Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 13 XLamp xr-c leds Mechanical Dimensions (TA = 25 C) All measurements are .1mm unless otherwise indicated. Lens Substrate Reflector Reflector Lens Substrate Anode 6.8 mm 4.4 .2 mm Side View 9.0 mm 8.4 mm 5.6 mm 6.46 mm 0.7 mm 7.0 mm Anode Bottom View Top View 8.4 mm 7.0 mm 5.6 mm 0.70 mm 6.46 mm Recommended PC Board Solder Pad Recommended PC Board Solder Pad Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 14 XLamp xr-c leds Tape and Reel 1.5 .1 4.0.1 12.0.1 All Cree carrier tapes1.75.10 conform to EIA-481D, Automated Component Handling Systems Standard. CATHODE SIDE 16.0 All dimensions in mm. +.3 -.0 13.5 (MIN) 4.0.1 12.0.1 1.75.10 ANODE SIDE +.3 -.0 1.5 .1 CATHODE SIDE 5.5.1 16.0 13.5 (MIN) ANODE SIDE 5.5.1 START USER FEED DIRECTION 50 EMPTY POCKETS WITH TAPE 60 (MIN) EMPTY POCKETS WITH TAPE 5-10 USER FEED DIRECTION EMPTY POCKTES WITH UNSEALED COVER TAPE START LOADED POCKETS 50 EMPTY POCKETS WITH TAPE LOADED POCKETS 60 (MIN) EMPTY POCKETS WITH TAPE 5-10 EMPTY POCKTES WITH UNSEALED COVER TAPE + 330.2 mm Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 15 XLamp xr-c leds Humidity Indicator Card (inside bag) Dry Packaging and Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Qty, Reel ID Packaged Reel Dessicant (inside bag) Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Qty, Reel ID, PO # Humidity Indicator Card (inside bag) Label with Cree Bin Code, Qty, Reel ID Label with Custo Code, Qty, Reel Boxed Reel Label with Cree Order Code, Qty, Reel ID, PO # Patent Label Label with Cree Bin Code, Qty, Reel ID Patent Label Copyright (c) 2007-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R), the Cree logo and XLamp(R) are registered trademarks of Cree, Inc. 16