DC60S3H - CRYDOM - Datasheet.Cloud

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

PUSHBUTTON SWITCHES

C

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

SERIES SIZE RATINGS (Max. in bold) POLES PAGE(S)

TP TINY 0.4VA 20V SP X X X C2-C5

ZP TINY 500mA 48V 0.4VA 20V SP X X C6-C8

TP TINY 500mA 48V 0.4VA 20V SP,DP X X C9-C12

9000 SUB-MINI. 100mA 30VDC SP X X C13-C17

9000 MINIATURE 600mA 125VAC 1A 30VDC SP X C18-C21

100mA 30VDC

10400 MINIATURE 3 A 110VAC or 24VDC SP,DP X C22-C23

2A 220VAC

300 & 400 MINIATURE 3A 125VAC or 28VDC SP X X X X C24-C30

1.5A 250VAC 0.4VA 20V

MPB MINIATURE 300mA 125VAC SP X C31

IP MINIATURE 500mA 48VAC SP X X X C32-C36

200mA 50VDC or 250VAC

IB & IS MINIATURE 400mA 32VAC 100mA- X X C37-C39

50VDC or 125mA 125VAC

SP MINIATURE 1A 120VAC or 30VDC SP,DP X X X X C40-C43

100mA 30VDC

18000 MINIATURE 1A 120VAC or 30VDC SP,DP X X C44-C50

8000 MINIATURE 6A 125VAC 3A 250VAC SP,DP X X X C51-C54

4A 30VDC 0.4VA 20V

800 MINIATURE 6A 125VAC 3A 250VAC SP,DP X X X X X C55-C64

7A 30VDC 0.4VA 20V

PB MINIATURE 6A 125VAC 3A 250VAC SP X X X X X C65-C73

7A 30VDC 0.4VA 20V

13000 MINIATURE 4A 125VAC 2A 250VAC SP,DP X X C74-C78

4A 30VDC 100mA 30V

13000X778 MINIATURE 4A 125VAC 2A 250VAC DP X X C79-C81

4A 28VDC 300mA 30VDC

1200 STANDARD 8A 125VAC 4A 250VAC SP X X X X C82-C84

4A 24VDC

1200M&MR STANDARD 8A 125VAC 4A 250VAC SP X X X C85-C86

4A 24VDC

4700&4800 STANDARD 6A 125VAC 3A 250VAC SP,DP X X X X C87-C88

MD STANDARD 200mA 30VDC SP,DP,4P X X C89-C91

MD2 STANDARD 15A 125VAC 10A 250VAC SP X C92

TV-5

1400N STANDARD 4A 125VAC 2A 250VAC SP X C93

AV STANDARD SEE INDEX ON PAGE C96 FOR AV SERIES PUSHBUTTON SWITCHES. C94-C116

PUSHBUTTON SWITCHES

C1

ILLUMINATED

SMT MOUNT

PANEL MOUNT

P. C. MOUNT

UL

CSA

VDE

WASHABLE

ESD PROTECTION

New!

PUSHBUTTON SWITCH SELECTION GUIDE: This catalog contains an extensive variety of pushbutton switches with

numerous options and accessories. To facilitate easy selection of the desired switch for your application, this guide

lists the various Series with some key selection parameters. Note - new Series added in this catalog are indicated

below, however many new models and options have also been added to other listed Series.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C2

TP SERIES - SMT WASHABLE TINY PUSHBUTTON SWITCHES

DESIGNED

EXCLUSIVELY FOR

SURFACE MOUNTING

SMT TP Series switches incorporate

many desireable features that include:

●Tape & reel packaging

This type of packaging is recom-

mended for:

● economy

● suitability for automated placement

● handling of large quantities of com-

ponents per packaging unit

● positive component positioning

● protection of terminals against

damage during handling

● high static resistance

●Reflow solderable

● High temperature plastic materials

● Tin plated grounding brackets

● Tin-lead alloy over nickel terminal

plating

● Terminals turned outward to prevent

the shadow effect in infrared solder-

ing and to permit visual inspection of

the solder joints

● .021" (0.55mm) air gap between p.c.

board and switch case

● End stackable with .400" (10.16mm)

pitch

● Available with positioning pins to

assure correct switch orientation

during the reflow process and provide

additional mechanical integrity

●Protected against electrostatic dis-

charges (ESD) up to 10 KV.

●Washable

Switches are designed to withstand

cleaning processes, including hot water

under pressure.

Surface mount devices (SMD) are subject to

more stringent constraints of temperature,

solderability, sealing and space savings than

through-hole components.

To meet these requirements, APEM has

designed a family of tiny surface mount

switches that include TL Series toggle

switches, TP Series pushbutton switches,

TR Series rocker switches & TG Series slide

switches. See toggle, rocker & slide switch

sections of catalog for TL, TR & TG Series

respectively.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C3

TP SERIES - SMT WASHABLE TINY PUSHBUTTON SWITCHES

PACKAGING

Standard packaging unit:

700 pieces

Tape meeting international standard IEC

Publication 286-3 (EIA481A)

Start leader: 15.7" (400mm) min.

Dimension 'A': 1.748" (44.40mm)

13.00 DIA–0.25

(.511 DIA–.009)

360.00 DIA Maxi 360.00 DIA Maxi

(14.173 DIA MAX)(14.173 DIA MAX)

(3.937 DIA MIN)(3.937 DIA MIN)

100.00 DIA mini100.00 DIA mini

3.00

(.118)

(1.590–.003)

(1.732–.011)

(.472)(.472)

40.40–0.10

44.00–0.30

12.0012.00

A

(.303)(.303)

7.707.70

Unrolling Direction

ELECTRICAL SPECIFICATIONS

Contact ratings (resistive lds.): 0.4 VA at 20 V max. (AC or DC)

Minimum load: 10 mA at 50 mV or 10µA at 5 VD

Initial contact resistance: 50 milliohms maximum

Insulation resistance: 1000 MΩ min. at 500 VDC

Dielectric strength: 1000 V rms between terminals &

frame. 500 V rms between terminals

Electrical life (at full load): 60,000 cycles

Static resistance: 10 KV (Schaffner equipment)

GENERAL SPECIFICATIONS

Travel: ON-MOM .039" (1mm), OFF-MOM. .031"

(0.8mm)

Operating temperature range: -40°C to +85°C

Moisture resistance: 21 days per IEC 512-6 test 11c

Vibration resistance: 10-500 Hz/10g per IEC 512-4 test 6d

Shock resistance: 50 g per IEC 512-4 test 6c

MATERIALS

Case: High temperature plastic UL94V-0

Actuator: High temperature plastic UL94V-0

Grounding brackets: Tin plated steel (includes positioning

pins)

Contacts: Gold plated brass

Terminals: Brass with tin-lead alloy over nickel

plate

Terminal seal: Epoxy

SOLDERING AND CLEANING

Reflow soldering: Infrared, vapor phase and infrared

convection

Washable: Per IEA-RS448-2: water and deter-

gent - preferred. Solvents.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C4

TP SERIES - SMT WASHABLE TINY PUSHBUTTON SWITCHES

Single pole momentary pushbutton switches

with positioning pins

MODEL NO. CIRCUIT

TP32WS83500 ON MOM

TP33WS83500 OFF MOM

Handle position:

MODEL NO. CIRCUIT

TP32WS83565 ON MOM

TP33WS83565 OFF MOM

Handle position:

SWITCH ACTION P.C. BOARD DIMENSIONS LED INDICATOR IN TINY PUSHBUTTON PKG.

Function 2 shown

3 2 1 31

1

Function 2 Function 3

(.120)

3.05

5.55

(.218)

(.149)

(.165)

(.181 DIA)

(.196 DIA)

(.318)

(.019)

0.50

8.10

5.00 DIA

4.60 DIA

4.20

3.80

3 2 1

(.400)(.400) (.202)(.202)

(.120)

(.218)

10.1610.16 5.155.15

5.55

3.05

1.801.80

(.070)(.070)

2.102.10

(.082)(.082)

7.967.96

(.313)(.313)

1.50

(.059)

0.80

(.031)

2.54

(.100)

2.54

(.100)

4.504.50

2.50 DIA

(.098 DIA)

(.177)(.177)

(.271)

6.90

(.165)

(.196 DIA)

(.318)

(.019)

0.50

8.10

5.00 DIA

4.20

321

(.400)

(.202)

(.120)

(.218)

10.16

5.15

5.55

3.05

2.54

(.100)

(.039)

(.372)

1.00

9.45

3.80

(.149)

(.177)

(.098 DIA)

2.50 DIA

4.50

4.60 DIA

(.181 DIA)

3.81

(.150)

5.08

(.200)

0.80

(.031)

(.059)

1.50

(.082)

(.313)

2.10

7.96

(.070)

6.90

(.271)

1.80

(.150)

3.81

(.025)

0.65

0.80 DIA

(.031 DIA)

ELECTRICAL SPECIFICATIONS

Forward voltage: Red;

3.0 volts at 10 milliamps (2V typical)

Green;

3.0 volts at 20 milliamps (2.2V typical)

Yellow;

3.0 volts at 10 milliamps (2.1V typical)

Reverse voltage: 5.0 volts minimum

Viewing angle (total): 90°

Wavelength: Red; 635 nm

Green; 565 nm

Yellow; 585 nm

PACKAGING Tape & reel

MODEL NO. COLOR

TV01WS00100 Red

TV02WS00100 Green

TV03WS00100 Yellow

(.149)

(.165)

(.181 DIA)

(.196 DIA)

(.318)

(.024)

0.60

8.10

5.00 DIA

4.60 DIA

4.20

3.80

31

(.400) (.202)

(.120)

(.218)

10.16 5.15

5.55

3.05

1.80

(.070)

2.10

(.082)

7.96

(.313)

1.50

(.059)

0.80

(.031)

5.08

(.200)

5.08

(.200)

(.271)

6.90

1.30

(.051)

+

1.10

(.043)

1.30

(.051)

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

TP SERIES - SMT WASHABLE TINY PUSHBUTTON SWITCHES

C5

REFLOW SOLDERING - STANDARD PROFILE

PROCESSING STEPS

The printed circuit board, carried by a conveyor belt,travels through the reflow

soldering oven and experiences the following programmed cycles:

a. pre-heat to a maximum of 200°C for 30 seconds

b. reflow at a maximum of 245°C for 10 seconds

c. final cleaning

TEMPERATURE/TIME PROFILE (typical)

P.C. board

Solder paste

application

Component

placement

Reflow

soldering

Final

cleaning

P.C. BOARD REWORK RECOMMENDATIONS

Hot air reflow technique is preferred. Avoid the

use of a soldering iron.

Caution: Excessive and/or repeated high temp-

erature exposure may affect switch performance

& reliability.

60 120 180 240 t (s)

100

150 C

170 C

240 C

60 s

C

200

0

pre-heating drying reflow gradual cooling

stabilization peak

240

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C6

ZP SERIES - TINY PUSHBUTTON SWITCHES, PANEL & P.C. MTG.

FEATURES

MATERIALS

Contacts & Terminals: Gold or silver plated brass

Actuator: Glass filled polyamide UL94-VO

Bushing: Tin plated zamac

Bracket: Tin plated steel

Case: UL94-VO thermoplastic

Terminal seal: Epoxy

SPECIFICATIONS

Contact ratings (resistive loads): Gold plated brass; 0.4 Volt-Amps max. at 20 V max.

Silver plated brass; 0.5 Amps at 48 V max.

Minimum load: 10 mA at 50 mV - 10µA at 5 VDC

Initial contact resistance: 50 milliohms maximum

Insulation resistance: 1000 megohms minimum at 500 VDC

Dielectric strength: 1000 V rms minimum between terminals and frame. 500 V rms between

terminals..

Electrical life: Gold contacts: 2 positions, 60,000 cycles min. 3 positions, 30,000 cycles min.

Silver contacts: 2 positions, 20,000 cycles min. 3 positions, 10,000 cyclesmin.

Operating temperature range: -30°C to +85°C

Moisture resistance: 21 days 95% (NFC 20-603 - IEC 8-2-3)

Travel: ON-MOM: 1.2mm ±0.3 (.047" ±.011) OFF-MOM: 1mm ±0.3 (.039" ±.011)

Terminal strength: Pull out force 10N (2.24 lbs.)

Torque: 1Nm (0.96 ft-lbs) max. applied between 2 nuts

Panel thickness (max.): 1.5mm (.059") with 2 nuts - 3mm (.118") with 1 nut

Hardware: Threaded models supplied with 2 hex nuts 7mm (.275") across flats, 1 locking

ring and 1 lockwasher. See hardware section of catalog.

ABOUT THIS SERIES

The material in this series is organized in the following sequence:

a. Completely specified switch models

b. 'build your own switch' order format

c. Option drawings

● Wave solderable.

● Metal bushing, threaded with flat, or plain.

● Ultra-compact case size.

● SP momentary models with epoxy sealed terminals.

New!

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C7

Solder lug terminals - silver contacts - threaded bushing

Straight p.c. terminals - mtg. bracket - gold contacts -

plain bushing

Horizontal right angle terminals - gold contacts -

plain bushing

Straight p.c. terminals - gold contacts - threaded bushing

MODEL NO.

ZP32S0101 ON MOM

ZP33S0101 OFF MOM

ZP SERIES - TINY PUSHBUTTON SWITCHES, PANEL & P.C. MTG.

New!

MODEL NO.

ZP32Y0000 ON MOM

ZP33Y0000 OFF MOM

MODEL NO.

ZP32P0001 ON MOM

ZP33P0001 OFF MOM

15.20mm (.598") wire-wrap term-

inals also available - to specify

substitute MW for P0 in above

model numbers.

MODEL NO.

ZP32W0000 ON MOM

ZP33W0000 OFF MOM

Bold arrow

indicates flat

Bold arrow

indicates flat

Bold arrow

indicates flat

Bold arrow

indicates flat

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C8

Vertical right angle terminals - gold contacts - plain bushing

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for complete model number.

( Allowable options are shown below each respective box).

Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications.

Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply

selecting from all available options shown and filling in the boxes.

Z

2ON MOM

3OFF MOM

S0 Solder lug

P0 Straight p.c.

Y0 Straight p.c.

with bracket

W0 Horizontal

right angle

WW Vertical

right angle

MW Wire-wrap

P

Series Single pole Electrical functions Terminals Contact & terminal mat'ls. Bushings

Example of completely specified

model number: ZP32S0001

ZP SERIES - TINY PUSHBUTTON SWITCHES, PANEL & P.C. MTG.

New!

3

00 Plain

01 Threaded

with flat

0Brass, gold plated

1Brass, silver plated

3Brass, gold plated -

(1.27 microns gold)

Although most combinations of options are

available, some may result in incompatibil-

ities. Consult factory if there is any question.

MODEL NO.

ZP32WW000 ON MOM

ZP33WW000 OFF MOM

BUSHINGS

00 Plain, with flat (for models YO, WO and WW) 01 Threaded, with flat (for models P0 and S0)

TERMINALS CROSS SECTIONS

Solder lug Printed circuit Function 2 Function 3

Bold arrow

indicates flat

1

3

2

1

3

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C9

TP SERIES - WASHABLE TINY MOMENTARY PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts & Terminals: Gold or silver plated brass

Actuator: Polyamide (UL94V-O),glass filled

Bracket: Tin plated steel

Case: PBT (UL94V-O)

Terminal seal: Epoxy

SPECIFICATIONS

Contact ratings (resistive loads): Gold plated brass: 0.4 Volt-Amps max. at 20 V max.

Silver plated brass: 0.5 Amps at 48 V max.

Minimum load: 10 mA at 50 mV - 10µA at 5 VDC

Initial contact resistance: 50 milliohms maximum

Insulation resistance: 1000 megohms minimum at 500 VDC

Dielectric strength: 1000 V rms min. between terminals and frame. 500 V rms between terminals.

Electrical life: Gold contacts: 60,000 cycles min. at full load. Silver contacts: 20,000 cycles

Operating temperature range: -30°C to +85°C

Plunger travel: 'ON MOM' - .039" (1mm) 'OFF MOM' - .031" (0.8mm)

Washing: Permissible with water, detergents and solvents.

● Wave solderable.

● Fully sealed for process compatibility.

● Ultra-compact case size.

● Case color options - blue or black (with black actuator).

● SPST, SPDT, DPST & DPDT p.c. mounting models.

AGENCY LISTINGS

GAM T1 (military). Availability: consult factory for details of listed models.

Note: drawings show switches with 3 terminals (function 2). Function 3 switches have only 2 terminals. See switch cross-sections at end of section.

SINGLE POLE

MODEL NO. CIRCUIT

TP32P003000 ON MOM

TP33P003000 OFF MOM

DOUBLE POLE

MODEL NO. CIRCUIT

TP42P003000 ON MOM

TP43P003000 OFF MOM

Handle position:

Straight p.c. terminals - gold plated brass contacts

SP DP

(.100)

(.043 DIA)

(.200)

(.100)

(.043 DIA)

(.149)

(.165)

(.358)

(.039)

(.181 DIA)

(.196 DIA)

(.139)

(.019)

(.098 DIA)

(.129)

(.196)

5.00

0.50

4.60 DIA

5.00 DIA

4.20

3.80

9.10

2.54

1.10 DIA

2.54

1.10 DIA

2.50 DIA

5.08

1.00

3.55

3.30

0.70

(.027)

(.240)

6.10

(.318)

8.10

5.08

(.200)

2.54

(.100)

(.318)

8.10

1 2 3

41

4 5 6

APEM

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C10

TP SERIES - WASHABLE TINY MOMENTARY PUSHBUTTON SWITCHES

Straight p.c. terminals - bracket mounting - gold plated brass contacts

SINGLE POLE

MODEL NO. CIRCUIT

TP32Y003050 ON MOM

TP33Y003050 OFF MOM

DOUBLE POLE

MODEL NO. CIRCUIT

TP42Y003050 ON MOM

TP43Y003050 OFF MOM

Handle position:

SINGLE POLE

MODEL NO. CIRCUIT

TP32W003050 ON MOM

TP33W003050 OFF MOM

DOUBLE POLE

MODEL NO. CIRCUIT

TP42W003050 ON MOM

TP43W003050 OFF MOM

Handle position:

Vertical right angle terminals - gold plated brass contacts

Wire-wrap terminals - gold plated brass contacts

SINGLE POLE

MODEL NO. CIRCUIT

TP32WW03050 ON MOM

TP33WW03050 OFF MOM

DOUBLE POLE

MODEL NO. CIRCUIT

TP42WW03050 ON MOM

TP43WW03050 OFF MOM

Handle position:

SINGLE POLE

MODEL NO. CIRCUIT

TP32MW03000 ON MOM

TP33MW03000 OFF MOM

DOUBLE POLE

MODEL NO. CIRCUIT

TP42MW03000 ON MOM

TP43MW03000 OFF MOM

Handle position:

0.500.50

5.085.08 9.209.20

3.503.50

3.553.55

5.085.08

5.085.08 2.542.54

5.085.08

3.803.80

5.085.08

8.658.65

3.303.30 0.700.70

4.204.20 (.043 DIA)(.043 DIA)

1.10 DIA1.10 DIA

(.043 DIA)(.043 DIA)

ﬂ1.101.10

(.100)(.100)

(.200)(.200)

(.019)(.019)

(.149)(.149)

(.165)(.165)

(.027)(.027)

(.139)(.139)

(.137)(.137)

(.200)(.200)

(.362)(.362)(.200)(.200)

(.340)(.340)

(.200)(.200)

(.129)(.129)

(.358)(.358)

9.109.10 (.196)(.196)

5.005.00

(.098 DIA)(.098 DIA)

2.50 DIA2.50 DIA

(.196 DIA)(.196 DIA)

(.181 DIA)(.181 DIA)

4.60 DIA4.60 DIA

5.00 DIA5.00 DIA

(.100)(.100)

2.542.54

3

2

1

6 3

SPDP

DPSP

(.027)

0.70

3.30 8.60

3.55

5.70

1.00

5.08

2.50 DIA

1.10 DIA

10.16

2.54

1.10 DIA

10.16

2.54

9.10

3.80

4.20

0.70

5.00 DIA

4.60

0.50

10.16

5.00

0.40

(.196)

(.129) (.338)

(.098 DIA)

(.019)

(.224) (.139)

(.400)

(.015)

(.196 DIA)

(.181 DIA)

(.039)

(.358)

(.027)

(.165)

(.149)

(.043 DIA)

(.400)

(.100)

(.200)

(.043 DIA)

(.400)

(.100)

1 4

1 2 3

4 5 6

APEM

8.10

(.318)

6.10

(.240)

(.027)

0.70

15.20

3.55

1.00

5.08

2.50 DIA

1.10 DIA

2.54

1.10 DIA

2.54

9.10

3.80

4.20

5.00 DIA

4.60 DIA

0.50

5.00

(.196)

(.598)

(.098 DIA)

(.019)

(.139)

(.196 DIA)

(.181 DIA)

(.039)

(.358)

(.165)

(.149)

(.043 DIA)

(.100)

(.200)

(.043 DIA)

(.100)

(.200)

5.08

2.54

(.100)

2 3

1

41

45 6

APEM

Ø2.50

2.50

3.55

(.139)

(.098 DIA)

2.54

5.08

9.20

3.50

0.70

Ø1.10

1.10

2.54

5.08

2.54

1.10 DIA

3.30

9.60

3.80

4.20

4.60 DIA

5.00 DIA

8.10

0.50

3.30

5.45

(.043 DIA)

(.200)

(.100)

(.043 DIA)

(.100)

(.200)

(.129)

(.214)

(.137)

(.362)

(.377)

(.019)

(.318)

(.129)

(.196 DIA)

(.181 DIA)

(.200)

(.165)

(.027)

(.149)

(.100)

2.54

3 1

2

3

6

SPDP

Horizontal right angle terminals - gold plated brass contacts

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

TP SERIES - WASHABLE TINY MOMENTARY PUSHBUTTON SWITCHES

Series Number of poles Electrical functions Terminals

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

( Allowable options are shown under each respective box).

Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications.

Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply

selecting from all available options shown and filling in the boxes.

T

3Single pole

4Double pole

2ON MOM

3OFF MOM

0Brass, gold plated

1Brass, silver plated

3Brass, gold plated - (1.27 microns gold)

8Brass, gold plated contacts with

tin plated terminals

9Contacts brass, gold plated (1.27

microns gold) and tin plated terminals

Options:

Contact & terminal mat'ls. Actuators & case colors Miscellaneous Caps (for long actuator only)

P0 Straight p.c.

Y0 Straight p.c.with bracket

W0 Horizontal right angle

WW Vertical right angle

MW Wire-wrap

P

00No special

requirement

50Crimped bracket

terminals - specify for

models with brackets.

See additional listings

on following page.

Example of completely specified

model number: TP32Y00305025

OPTION DRAWINGS

30 40

U4310 If ordered separately U4320 If ordered separately

Colors

1blue

2black

3green

4grey

5yellow

6red

7/1 white

9orange

Actuators & case colors

Blue case Black case

Short (standard) 30 80

Blue case Black case

Long 35 85

Black case

Flush 82

CAPS Note: replace last '0' in part numbers with color code.

(.098 DIA)

(.149)

(.165)

(.139)

(.181 DIA)

(.196 DIA)

(.240)

4.60 DIA

5.00 DIA

4.20

3.80

2.50 DIA

3.55

6.10

2.50 DIA

3.80

4.20

5.00 DIA

4.60 DIA

(.196 DIA)

(.181 DIA)

(.165)

(.149)

(.098 DIA)

(.177)

4.50

6.10

(.240)

(.149)(.149)

(.165)(.165)

(.181 DIA)(.181 DIA)

(.196 DIA)(.196 DIA)

(.240)(.240)

4.60 DIA4.60 DIA

5.00 DIA5.00 DIA

4.204.20

3.803.80

6.106.10

4.00

(.157)

6.50 DIA

3.00

(.118)

(.255 DIA)

(.118)

3.00

(.153)

5.00 DIA

3.90

(.196 DIA)

Specify 30, 35,

80, 82, or 85

See drawings with

specifications and

dimensions.

C11

30*

40*

* - Specify color -

see caps below.

For long actuator only For long actuator only

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

TP SERIES - WASHABLE TINY MOMENTARY PUSHBUTTON SWITCHES

SPECIAL OPTIONS

00 No special requirement.

07 Trimmed terminals for WW models only - .125" (3.2mm).

08 Extended terminals for W0 models only.

18 WW models without mounting bracket.

20 WW models with mounting bracket and p.c. board spacer tab.

25 Trimmed terminals for all models except WW - .196" (5mm).

30 Wire-wrap terminals on models with Y bracket.

40 With cap U3500 mounted over plunger and bushing.

Provides additional protection during soldering & cleaning.

50 Crimped bracket terminals (retains switch on p.c. board

during assembly and soldering). For models with W0, WW

& Y0 terminals.

07 08

18

40

20

50

SPECIAL OPTIONS & MISCELLANEOUS

25 30

Switch cross-sections

Function 2 (ON MOM) Function 3 (OFF MOM)

C12

2.70

(.106)

10.16

(.400)

(.196)

5.00

(.598)

15.20

3

2 1

31

1

(.125)

3.20

(.492)

12.50

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C13

9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts & Terminals: Gold plated brass

Actuator: Polyamide,glass filled

Bracket: Tin plated steel

Case: PPS

Bushing: Nickel plated brass

Terminal seal: Epoxy

Hardware: Threaded bushing models supplied with 1 Hex Nut p/n U544. See drawing -

end of section.

● Single pole panel and p.c. mounting models.

● Normally open (NO) & normally closed (NC) electrical functions.

● Self-cleaning or butt action contacts.

● Ultra-compact case size.

Solder lug terminals - threaded bushing - self-cleaning contacts

SPECIFICATIONS

Contact ratings (resistive loads): 100 mA at 30 VDC

Initial contact resistance: 30 milliohms maximum

Insulation resistance: 1000 megohms minimum at 500 VDC

Dielectric strength: 500 V rms min. between terminals. 1000 V rms between terminals & case

Electrical life: 9100, 9200N & 9500N: 250,000 cycles min. 9200 & 9500: 100,000 cycles min.

Operating temperature range: -30°C to +65°C

Panel thickness: 1.50mm (.059") max.

Travel 9533 & 9233 9532 & 9232 9533N, 9233N & 9133

Total .062" (1.60mm) .070"(1.80mm) .035"(0.9mm)

Pre- .029"(0.75mm) .039"(1.00mm) -

Over- .027"(0.70mm) .029"(0.75mm) -

9532CD Normally closed

9533CD Normally open

(.096 DIA)

(.137)

(.118)

(.314)

(.100)

(.255 DIA)

(.078)

(.118)

(.157 DIA X 0.70 IS)

EPOXY

2.45 DIA

2.54

2.00

6.50 DIA

4.00 DIA X 0.70 SI

3.50

3.00

8.00

3.00

(.007)

0.18

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C14

9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES

Straight p.c. terminals - threaded bushing - self-cleaning contacts

Straight p.c. terminals - bracket mounting - self-cleaning contacts

Right angle p.c. terminals - self-cleaning contacts

Solder lug terminals - threaded bushing - butt action contacts

9232CD Normally closed

9233CD Normally open

9232YCD Normally closed

9233YCD Normally open

9533NCD Normally open

9232WWCD Normally closed

9233WWCD Normally open

8.00

3.00

3.50

4.00 DIA X 0.70 SI

6.50 DIA

2.45 DIA

EPOXY

(.157 DIA X 0.70 IS)

(.255 DIA)

(.314)

(.118)

(.137)

(.096 DIA)

(.100)

(.196)

(.023)

5.00

2.54

0.60

(.007)

0.18

(.100)

2.54

(.043 DIA)

1.10 DIA

(.096 DIA)

(.023)

(.118)

(.400)

(.374)

(.200)

(.007)

(.023)

(.200)

(.255)

(.200)

(.400)

(.100)

2.54

10.16

5.08

0.60

6.5 DIA

0.18

0.60

10.16

5.08

9.50

5.08

2.45 DIA

3.00

EPOXY

(.118 DIA)

3.00 DIA

(.137)

(.106)

(.100)

3.50

2.70

2.54

(.127)

3.25

(.023)

0.60

(.043 DIA)

1.10 DIA

3.00

4.00 DIAX 0.70 SI

2.00

2.54

2.45 DIA

EPOXY

(.157 DIA X 0.70 IS)

(.118)

(.078)

(.100)

(.096 DIA)

(.240)

6.10

(.015)

0.40

3.00

3.50

(.118)

(.137)

6.50 DIA

(.255 DIA)

(.096 DIA)

(.137)

(.102)

(.366)

(.157)

(.023)

(.200)

(.100)

(.300)

(.200)

(.300)

(.100)

5.08

0.60

2.45 DIA

2.54

7.62

5.08

7.62

2.54

4.00

9.30

3.50

2.60

1.10 DIA

(.043 DIA)

(.118 DIA)

3.00 DIA

EPOXY

(.015)

0.40

(.007)

0.18

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C15

9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES

Straight p.c. terminals - threaded bushing - .350" (8.9mm) p.c. to panel - butt action contacts

Straight p.c. terminals - threaded bushing - .279" (7.1mm) p.c. to panel - butt action contacts

Straight p.c. terminals - tall bracket mounting - butt action contacts

Straight p.c. terminals - short bracket mounting - butt action contacts

9133YCD Normally open

9233NCD Normally open

9133CD Normally open

9233NYCD Normally open

0.60

2.54

(.023)

(.100)

(.096 DIA)

(.157 DIA X 0.70 IS)

EPOXY

2.45 DIA

4.00 DIA X 0.70 SI

(.240)

6.10

(.015)

0.40

3.00

3.50

(.118)

(.137)

(.255 DIA)

6.50 DIA

(.279)

(.157)

(.100)

2.54

(.043 DIA)

1.10 DIA

4.00

7.10

EPOXY

3.00 DIA

(.118 DIA)

(.043 DIA)

1.10 DIA

2.60

3.50

4.00

2.54

7.62

5.08

7.62

2.54

2.45 DIA

0.60

5.08

(.100)

(.300)

(.200)

(.300)

(.100)

(.200)

(.023)

(.157)

(.102)

(.137)

(.096 DIA)

(.366)

9.30

(.015)

(.023)

0.40

0.60

EPOXY

3.00 DIA

(.118 DIA)

(.043 DIA)

1.10 DIA

2.60

3.50

4.00

2.54

7.62

5.08

7.62

2.54

2.45 DIA

0.60

5.08

(.100)

(.300)

(.200)

(.300)

(.100)

(.200)

(.023)

(.157)

(.102)

(.137)

(.096 DIA)

(.303)

7.70

(.023)

(.015)

0.40

0.60

2.54

(.023)

(.100)

(.096 DIA)

(.137)

(.118)

(.255 DIA)

(.157 DIA X 0.70 IS)

EPOXY

2.45 DIA

6.50 DIA

4.00 DIA X 0.70 SI

3.50

3.00

(.015)

0.40

(.350)

(.157)

6.10

(.240)

1.10 DIA

(.043 DIA)

2.54

(.100)

4.00

8.90

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES

Right angle p.c. terminals - butt action contacts

Series Terminals Number Electrical Bracket/

case height of poles funtion terminals

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

(Allowable options are shown under each respective box). Note: 'NONE' indicates box may be left empty.

Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications.

Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply

selecting from all available options shown and filling in the boxes.

9

Single pole 2Normally closed (NC)

3Normally open (NO)

Gold plated

brass (standard)

Options:

(NONE) Epoxy sealed

terminals (standard)

K* Front panel sealing

with two 'o'-rings

* for models 9533N, 9233N & 9133 only.

Contact materials Sealing Actuator

Example of completely specified

model number: 9233YCD

Case height: .314" (8mm)

2......Straight p.c. terminals, threaded bushing...........................................(NONE)

2......Straight p.c. terminals, tall bracket, smooth bushing..........................Y

2......Right angle p.c. terminals, bracket, smooth bushing......................... W W

5......Solder lug terminals, threaded bushing............................................. (NONE)

Case height .240" (6.1mm)

1......Straight p.c. terminals, threaded bushing .279" (7.1mm) to panel.....(NONE)

1......Straight p.c. terminals, short bracket, smooth bushing......................Y

1......Right angle p.c. terminals, bracket, smooth bushing......................... W W

2......Straight p.c. terminals, threaded bushing, .350" (8.9mm) to panel....N

2......Straight p.c. terminals, tall bracket, smooth bushing......................... N Y

5......Solder lug terminals, threaded bushing............................................. N

3

(NONE) Standard

0Flush

4Long

CD

9133WWCD

Normally open

C16

Although most

combinations of

options are available,

some may result in

incompatibilities.

Consult factory if

there is any question.

Caps available

separately -

see option drawings.

3.00 DIA

(.118 DIA)

EPOXY

3.00

2.45 DIA

5.08

7.60

5.08

6.5 DIA

0.60

5.08

10.16

2.54

(.100)

(.400)

(.200)

(.255 DIA)

(.200)

(.023)

(.200)

(.299)

(.118)

(.096 DIA)

(.015)

0.40

(.106)

(.137)

3.50

(.400)

(.100)

10.16

2.54

(.023)

0.60

2.70

1.10 DIA

(.043 DIA)

(.127)

3.25

Models with press-in mounting bezel

Normally closed

9232CD4+U4316+U4922

Normally open

9233CD4+U4316+U4922

The highly cosmetic black

bezel enables mounting on a

front panel by merely pressing

into a .320" dia. (8.15mm)

panel hole. Arrays can be

closely mounted, left to right or

up and down. Red contoured

actuator cap (U4316) indicated.

See Cap options on next pg. for

other available colors

New!

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES

SWITCH ACTION

Function 2 Function 3 Function 3

(NC) (NO) (NO)

Self-cleaning contacts butt action contacts

TERMINAL OUTLINES

MISCELLANEOUS

Solder lug Straight p.c.

PANEL CUT-OUT

OPTION & HARDWARE DRAWINGS

HEX NUT Supplied with threaded bushing models

U4310 U4320

For 4 actuator only For 4 actuator only

Colors

1blue

2black

3green

4grey

5yellow

6red

7/1 white

9orange

SEALING OPTION

K Front panel sealing with

2 '0'-rings (1) provides

protection against water

and dust. Panel seal

withstands 0.1bar

pressure

(K option for models

9533N, 9233N and

9133 only). K

CAPS Note: replace last '0' in p/n with color code. (order separately)

U544 Nickel plated

4.004.00

(.157)(.157)

6.50 DIA6.50 DIA

3.003.00

(.118)(.118)

(.255 DIA)(.255 DIA)

(.118)

3.00

(.153)

5.00 DIA

3.90

(.196 DIA)

1

(.196) (.059)

(.157 DIA X 0.70 IS)

M4 X 0.70 SI

5.00 1.50

(.165 DIA)

4.20 DIA

(.078)

(.039)

(.031)

1.00

2.00

0.80

1.00

(.118)

3.00

(.157)(.157)

(.023)(.023)

4.004.00

0.600.60

(.196)(.196)

5.005.00

ACTUATOR OPTIONS

(NONE) Standard 0 Flush 4 Long

(.096 DIA)

2.45 DIA

(.137)

3.50

(.098 DIA)

2.5 DIA

4.70

(.185)

2.45 DIA

(.096 DIA)

C17

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C18

9000 SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts & Terminals: Gold plated brass or silver

Actuator: Polyamide,glass filled or nickel plated brass (with K option)

Bracket: Tin plated steel

Case: Diallyl phthalate

Bushing: Nickel plated brass

Terminal seal: Epoxy

Hardware: Supplied with 2 Hex Nuts .314" (8mm) across flats & 1 Lockwasher

See hardware section of catalog.

● Single pole panel mounting models.

● NO, NC & NC/NO combined electrical functions.

● Solder lug & straight p.c. terminals.

● Compact case size.

● Supplied with 2 Hex Nuts & Lockwasher.

9632AB Normally closed

9635AB NC/NO combined

Solder lug terminals - case length .440" (11.2mm) - silver contacts

SPECIFICATIONS

Contact ratings (resistive loads): Gold plated brass: 100 mA at 30 VDC

Silver: 0.3 Amps at 250 VAC, 0.6 Amps at 125 VAC or 1 Amp at 30 VDC

Initial contact resistance: 50 milliohms maximum

Insulation resistance: 1000 megohms minimum at 500 VDC

Dielectric strength: 1000 V rms min. between terminals. 1500 V rms between terminals & case

Electrical life: 250,000 cycles minimum

Operating temperature range: -30°C to +65°C

Travel: 9600, 9400 & 9400Y models - .051" (1.3mm)

9600N & 9400N models - .035" (0.9mm)

(.157 DIA)

(.275)

(.078)

(.200)

(1/4-40UNS)

(.393 DIA)

(.354 DIA)

(.236)

6.00

7.00

4.00 DIA

2.00

6.35 DIA-40UNS

10.00 DIA

9.00 DIA

5.08

(.440)

(.204)

5.20

11.20

(.015)

0.40

NO

NC

EPOXY

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C19

9000 SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

Straight p.c. terminals - case length .440" (11.2mm) - gold plated brass contacts

Bracket mounting w/straight p.c. terminals - case length .440" (11.2mm) - gold plated brass contacts

Solder lug terminals - case length .334" (8.5mm) - silver contacts

Straight p.c. terminals - case length .334" (8.5mm) - gold plated brass contacts

9432CDB Normally closed

9433CDB Normally open

9435CDB NC/NO combined

9432YCDB Normally closed

9433YCDB Normally open

9435YCDB NC/NO combined

9633NAB Normally open

9433NCDB Normally open

(.157 DIA)

(.236)

(.275)

(.200)

(1/4-40UNS)

(.374 DIA)

(.059)

(.078)

6.00

7.00

1.50

5.08

4.00 DIA

6.35 DIA-40UNS

9.50 DIA

2.00

(.334 DIA)

8.50 DIA

(.334)

(.196)

5.00

8.50

(.015)

0.40

EPOXY

9.50 DIA

6.35 DIA-40UNS

4.00 DIA

3.50

10.00

7.00

6.00

(.374 DIA)

(1/4-40UNS)

(.137)

(.393)

(.275)

(.236)

(.157 DIA)

(.039)

(.059)

(.200)

(.062 DIA)

1.60 DIA

5.08

1.50

1.00

(.334 DIA)

8.50 DIA

(.015)

5.08

(.200)

0.40

(.157 DIA)

(.200)

(1/4-40UNS)

(.236)

6.00

4.00 DIA

6.35 DIA-40UNS

5.08

(.511)

(.161)

(.259)

(.125)

(.046)

(.620)

(.322)

(.125)

(.620)

(.200)

(.062 DIA)

(.620)

(.125)

(.200)

6.60

4.10

13.00

5.08

15.75

5.08

15.75

1.17

3.18

8.20

15.75

3.18

1.60 DIA

3.18

(.393 DIA)

10.00 DIA

(.015)

0.40

(.015)

(.200)

5.08

NO

NC

F2

F5

9.009.00

10.010.0

6.35-40UNS6.35-40UNS

4.004.00

11.8511.854.554.55

7.007.00 6.006.00

(.236)(.236)

(.354 DIA)(.354 DIA)

(.393 DIA)(.393 DIA)

(1/4-40UNS)(1/4-40UNS)

(.179)(.179) (.466)(.466)

(.275)(.275)

(.157 DIA)(.157 DIA)

(.039)(.039)

1.001.00 0.400.40

(.015)(.015)

5.085.08

(.200)(.200)

5.085.08

(.200)(.200)

5.085.08

(.200)(.200)

5.085.08

(.062 DIA)(.062 DIA)

1.601.60

NONO

NCNC

NONO

F2F2 F5F5

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C20

9000 SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

Solder lug terminals - .630" dia. (16mm) bushing - metal button - silver contacts

Series Terminals/case length Number of poles Electrical function Bracket/case length

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

(Allowable options are shown under each respective box).

Note: 'NONE' indicates box may be left empty.

Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications.

Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply

selecting from all available options shown and filling in the boxes.

9

Single pole 2Normally closed (NC)

3Normally open (NO)

5NC/NO combined

ASilver

CDBrass, gold plated

Options:

(NONE) No sealing

BEpoxy sealed terminals

KFront panel sealing with

two 'o'-rings & metal

actuator

Contact materials Sealing Special options

Example of completely specified

model number: 9432YCDBF

SWITCH ACTION

Function 2 Function 3 Function 5

(NC) (NO) (combined)

TERMINAL OUTLINES

MISCELLANEOUS

4Straight pc terms.,case length .440" (11.2mm)

6Solder lug terms., case length .440" (11.2mm)

4Straight pc terms. with optional case length/brkt.

- select N or Y from 'brkt/case length' box

6Solder lug terms.with optional case length -

indicate N in 'brkt/case length' box

(NONE)

NCase length -

.334" (8.5mm)

YBrkt. mounting,

case length -

.456" (11.6mm)

3

(NONE)

FTin plated terminals

(for p.c. terms.only)

X60 1 Special

contact w/lower rating

Silver contacts

9633AX1146 Normally open

Gold plated

silver contacts

9633ADX1146 Normally open

Panel cut-out: .637" dia. (16.2mm)

Maximum rating: 0.3A 250VAC or 1A 30VDC

Epoxy sealed terminals.

Other options not applicable for this

configuration

Solder lug Straight p.c.

PANEL CUT-OUT

Caps available separately -

see option drawings.

Although most combinations of options are available, some may

result in incompatibilities. Consult factory if there is any question.

6.50 DIA

(.255 DIA)

(.204)

(.078)

(.047)

5.20

1.20

2.00

(.059)

1.50

(.179)

(.204)

(.039)

4.55

5.20

1.00

(.748)

(.472 DIA)

(.629 DIAx1.00IS)

(.078)

(.015)

(.200)

(.118)

(.204)

(.059)

(.374)

(.291)

(.129)

0.40

5.08

19.00

12.00 DIA

2.00

16.00 DIAx1.00SI

3.00

5.20

3.30

7.40

1.50

9.50

18.00 DIA

(.708 DIA)

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C21

9000 SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

OPTION DRAWINGS & SPECIAL OPTIONS

CAPS Note: replace last '0' in p/n with color code. (order separately)

U900 U1140 U1720 U480 Standard

U630 U2430 Square U2020 Square

Colors

1blue

2black

3green

4grey

5yellow

6red

7/1 white

9orange

DRESS NUTS Chrome plated. Order separately.

U1636 (for cap U1140) U825 (for cap U630) U840 (for cap U480)

SPECIAL OPTIONS

FTin plated terminals (for p.c. terminals only).

X601 Silver plated brass contacts

Contact ratings: 0.2A 250VAC, 0.4A 125VAC or 0.5A 30VDC

Electric life: 20,000 cycles minimum.

Minimum quantity: 5,000 pieces.

(.157)

(.196)

(.129)

4.00

3.30

5.00 DIA

(.250)

(.314 DIA)

(.118)

3.00

6.35

8.00 DIA

(.118)

(.370)

(.250)

3.00

6.35

9.40 DIA

(.118)

(.393)

(.295)

10.00 DIA

7.50

3.00

(.590 DIA)

(.393)

(.118)

3.00

10.00

15.00 DIA

(.452 SQ)

(.157)

(.196)

4.00

3.00

11.50x11.50

(.236)

(.452 SQ)

(.195)

6.00

5.00

11.50x11.50

(.322 DIA) (.322 DIA)

(.500 DIA) (.500 DIA)

(1/4-40UNS) (1/4-40UNS)

(.322) (.322)

(.244) (.244)

12.70 DIA 12.70 DIA

8.20 DIA8.20 DIA

6.20 6.20

8.20 8.20

6.35 DIA-40UNS 6.35 DIA-40UNS

(.610 DIA)

(.728 DIA)

18.50 DIA

15.50 DIA

6.35 DIA-40UNS

(1/4-40UNS)

8.00

(.314)

(.228)

5.80

(.413 DIA)

(.531 DIA)

(.314)

(.228)

10.50 DIA

13.50 DIA

5.80

8.00

6.35 DIA-40UNS

(1/4-40UNS)

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C22

10400 SERIES - PROFESSIONAL MINIATURE MOMENTARY PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts & Terminals: Silver or gold plated silver

Actuator: Chrome plated brass

Case: Diallyl phthalate

Housing: Nickel plated brass

Bushing: Nickel plated brass

Terminal seal: Epoxy

SPECIFICATIONS

Contact ratings & life: Silver or gold plated silver: 3 Amps at 110 VAC, 2 Amps at 220 VAC or 3 Amps at

(resistive loads) 24 VDC.

Initial contact resistance: 10 mΩ max.

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 1000 V rms min. between terminals of the same pole

2000 V rms min. between terminals and frame

2000 V rms min. between terminals of adjacent poles

Electric life: 50,000 cycles min.

Torque: 1.106 Ft-lbs. (1.50 Nm) max. applied to nut

Operating temp. range: -40°C to +85°C

● Single and double pole panel mounting models with optional matte black finish.

● ON - MOM electrical functions.

● Solder lug terminals.

● Compact case size with 10mm (.393") diameter threaded bushing.

● Epoxy terminal sealing standard.

AGENCY LISTINGS

CECC 96401-001 Availability: Consult factory for details of approved models.

Marking: To order switches marked CECC, add 'CECC' to model number.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C23

10400 SERIES - PROFESSIONAL MINIATURE MOMENTARY PUSHBUTTON SWITCHES

Single pole - solder lug terminals

AB

1-2 1-3

Silver contacts

104350003 ON - MOM

Gold plated silver contacts

104350108 ON - MOM

Standard hardware supplied:

1 Knurled nut, 1 hex nut,

1 locking ring and 1 lockwasher

SWITCH ACTION

Single pole Double pole Solder lug

TERMINAL OUTLINE

MISCELLANEOUS

PANEL CUT-OUT

Double pole - solder lug terminals

AB

2-1 2-3

5-4 5-6

Silver contacts

104450003 ON - MOM

Gold plated silver contacts

104450108 ON - MOM

Standard hardware supplied:

1 Knurled nut, 1 hex nut,

1 locking ring and 1 lockwasher

0.50

4.00

2.50

6.40 DIA

11.00

5.00

14.00 DIA

5.00

12.70

10.00 DIA X 0.75 SI

(.551 DIA)

2 3 1

(.393 DIA X 0.75 IS)

(.251 DIA)

(.098)

(.157)

(.019)

(.196)

(.433)

(.196)

(.500)

14.00

(.551)

(.314)

8.00

2

3

1

A

B

EPOXY

(.500) (.500) (.196) (.196)

(.433) (.433) (.196) (.196)

(.019) (.019)

(.157) (.157) (.098) (.098)

(.236) (.236)

(.551) (.551)

(.251 DIA) (.251 DIA)

(.393 DIA X 0.75 IS) (.393 DIA X 0.75 IS)

2 2

3 3

1 1 4 4

6 6

5 5

1 3 2 1 3 2

(.551 DIA) (.551 DIA)

10.00 DIA X 0.75 SI 10.00 DIA X 0.75 SI

12.70 12.70 5.00 5.00 14.00 14.00

14.00 DIA 14.00 DIA 5.00 5.00 11.00 11.00

6.40 DIA 6.40 DIA

2.50 2.50

6.00 6.00

4.00 4.00

0.50 0.50

14.00 14.00

B B

A A

EPOXY EPOXY

(.098)

(.047)

(.066)

(.196)

1.70

5.00

1.20

2.50

6.20

10.20 DIA

2.20

(.401 DIA)

(.086)

(.244)

2 3 1

1 3 2

Note: Bold arrow in drawings indicates keyway.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C24

300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts: Coin silver for power & UL models. Gold over nickel over brass for dry

circuit models.

Actuator: Nylon. Black color is standard for 300 Series. White is standard for 400 Series.

Bushing: Nickel plated brass

Base: Melamine phenolic, color red.

Terminal seal: Epoxy (standard)

Support bracket: Brass or steel, tin plated

Spring mounting bracket: Stainless steel

Bezel & cap: Nylon. Available in black, red or white. Consult factory for other colors.

Hardware: See Miscellaneous section.

LED: Intensity: 2.0 mcd at 10 mA. Forward voltage: 2.0V (3.0V max.). Max. contin-

uous forward current: 30 mA at 25°C. Red standard - yellow & green are op-

tional. Specifications are subject to change without notice - consult factory.

SPECIFICATIONS

Contact ratings & life: (Q) power models - coin silver: 1 Amp at 125 VAC or 28 VDC or 0.5 Amps

at 250 VAC - electric life 250,000 cycles min. 3 Amps at 125 VAC or 28 VDC,

or 1.5 Amps at 250 VAC - electric life 10,000 cycles min. (All previous loads

are resistive).

(B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max.-

electric life 250,000 cycles min.

UL models - coin silver: 1 Amp at 125 VAC or 0.5 Amps at 250 VAC (75%

power factor). UL file no. E66367.

Initial contact resistance: 10 milliohms max. at 3 VDC, 0.1 Amp.

Insulation resistance: Greater than 10,000 megohms.

Dielectric strength: 1000 Volts RMS min. at sea level.

Operating temperature range: -30°C to +85°C

ABOUT THIS SERIES

The material in this series is organized in the following sequence:

a. Completely specified switch models & options b. 'build your own switch' order format

c. Additional options & panel cut-outs

AGENCY RECOGNITION

UL Marking: Switches ordered with '/UL' added at

end of model no. are supplied with recognized mark.

● Dry circuit through power ratings .

● Compact size SPST momentary and alternate action models with numerous options.

● Panel, panel & p.c. and p.c. mounting models, lighted and unlighted.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C25

300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES

(Q) Power (B) Dry ckt. UL

Model No. Model No. Model No.

301ZQE 301ZBE 301ZQE/UL

302ZQE 302ZBE 302ZQE/UL

303ZTE*303ZBE n/a

304ZTE*304ZBE n/a

305ZQE 305ZBE 305ZQE/UL

306ZQE 306ZBE 306ZQE/UL

* indicates 'Q' option not available for these models

302 303 304

301

305 306

N.O.

with overtravel

Total travel: .110

Overtravel: .020 min.

Actuation force: 8.5 oz. ± 4 oz.

N.O. without overtravel

Total travel: .060

Actuation force: 10 oz. ± 4 oz.

N.C. with pretravel

Total travel: .055

Pretravel: .020 min.

Actuation force: 8 oz. ± 4 oz.

N.C. without pretravel

Total travel: .040

Actuation force: 8.5 oz. ± 4 oz.

N.O. with more overtravel than

301

Total travel: .110

Pretravel to contact closure: .030

Actuation force to contact closure:

3 oz.

Overtravel: .075

Actuation force at full travel: 8 oz.

N.O. with sealed contact area

and maximum overtravel.

Total travel: .310

Pretravel to contact closure: .025

Actuator force to contact closure: 1.5

oz.

Overtravel: .250 minimum

Actuation force at full travel: 9 oz.

Note: Electrical or mechanical life

for this model is 20,000 cycles.

Switch caps optional - see Hardware section of catalog.

(Q) Power (B) Dry ckt. UL

Model No. Model No. Model No.

401ZQE 401ZBE 401ZQE/UL

402ZQE 402ZBE 402ZQE/UL

United States Patent 4,319,106

Switchcaps optional - see Hardware section of catalog.

SNAP-ACTION MECHANISM

Pretravel to contact clusure: .026

Travel to actuate switch .106

Total travel: .137

Force to actuate switch: 22 oz.

Force at maximum travel: 35 oz.

Mechanical life: 1,000,000 cycles minimum

OPTIONS

Z C E (standard)

Solder lug terminal Printed circuit terminal Epoxy seal

Colored operating

actuator

Available in dyed nylon.To specify,

add digit at end of model number -

1 blue, 2 black, 3 green, 5 yellow,

6 red, 7/1 white or 9 orange.

Black is standard for 300 Series.

White is standard for 400 Series.

300 SERIES SPST Momentary (Normally open or normally closed)

400 SERIES (401 Push on/ push off, 402 N.O. momentary)

Black

actuator

optional -

white is

standard

White actuator

optional - black is

standard

NOTE: When using sealing boot U5321 with 400 Series switches,

add 'S1' to model number.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C26

300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES

Solder lug terminals - snap-in bezel with outboard LED

POWER CKT. DRY CKT. UL ELECTRICAL

MODEL NO. MODEL NO. MODEL NO. FUNCTION

301SZQEJ6168 301SZBEJ6168 301SZQEJ6168/UL MOM. S.P N.O. w/overtravel

302SZQEJ6168 302SZBEJ6168 302SZQEJ6168/UL MOM. S.P N.O. no overtravel

303SZQEJ6168 303SZBEJ6168 303SZQEJ6168/UL MOM. S.P N.C. w/pretravel

304SZQEJ6168 304SZBEJ6168 304SZQEJ6168/UL MOM. S.P N.C. no ptretravel

305SZQEJ6168 305SZBEJ6168 305SZQEJ6168/UL MOM. S.P N.O. w/overtravel

401SZQEJ6168 401SZBEJ6168 401SZQEJ6168/UL S.P Alternate snap-action

402SZQEJ6168 402SZBEJ6168 402SZQEJ6168/UL MOM. S.P N.O. (snap-action)

MODEL NO. DIM. A DIM. B

301 .108 .929

302 .085 .817

303 .085 .929

304 .085 .817

305 .108 .929

401 .145 1.142

402 .145 1.142

401SZQEJ6168

RECOMMENDED PANEL CUTOUT

Panel thickness range - .047-.125

LED leads - 31/32" min. long

Anode (front) - white

Cathode (back) - black

Solder lug terminals - snap-in bezel

POWER CKT. DRY CKT. UL ELECTRICAL

MODEL NO. MODEL NO. MODEL NO. FUNCTION

301SZQEJ8168 301SZBEJ8168 301SZQEJ8168/UL MOM. S.P N.O. w/overtravel

302SZQEJ8168 302SZBEJ8168 302SZQEJ8168/UL MOM. S.P N.O. no overtravel

303SZQEJ8168 303SZBEJ8168 303SZQEJ8168/UL MOM. S.P N.C. w/pretravel

304SZQEJ8168 304SZBEJ8168 304SZQEJ8168/UL MOM. S.P N.C. no ptretravel

305SZQEJ8168 305SZBEJ8168 305SZQEJ8168/UL MOM. S.P N.O. w/overtravel

401SZQEJ8168 401SZBEJ8168 401SZQEJ8168/UL S.P Alternate snap-action

402SZQEJ8168 402SZBEJ8168 402SZQEJ8168/UL MOM. S.P N.O. (snap-action)

MODEL NO. DIM. A DIM. B

301 .108 .929

302 .085 .817

303 .085 .929

304 .085 .817

305 .108 .929

401 .145 1.142

402 .145 1.142

302SZQEJ8168 401SZQEJ8188

RECOMMENDED PANEL CUTOUT

Panel thickness range - .047-.125

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C27

300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES

Straight p.c. terminals - p.c. mounting bezel DRY CKT. ELECTRICAL

MODEL NO. FUNCTION

301SV30BEJ8488 MOM. S.P N.O. w/overtravel

302SV30BEJ8488 MOM. S.P N.O. no overtravel

305SV30BEJ8488 MOM. S.P N.O. w/added overtravel

302SV30BEJ8488

MODEL NO. OPTION* DIM. A DIM. B DIM C. DIM D. DIM. E

301S V30 .100 .900 .780 .527 .237

301S V40 .100 1.020 .900 .647 .118

302S V30 .070 .900 .780 .527 .125

302S V40 .070 1.020 .900 .647 .357

305S V30 .100 .900 .780 .527 .237

305S V40 .100 1.020 .900 .647 .118

*Options V31 & V41 also available.

They are the same as V30 & V40

respectively, except with crimped

leg design for p.c. board retent-

ion, as shown.

PANEL CUTOUT P.C. LAYOUT

Right angle p.c. terminals - p.c. mounting bezel

302SV-1BEJ8488

MODEL NO. OPTION DIM. A DIM. B DIM C. DIM D. DIM. E DIM. F

301S V .100 .960 1.080 .550 .150 .190

301S V-1 .100 .910 1.030 .550 .100 .190

302S V .070 .860 .980 .450 .150 .190

302S V-1 .070 .810 .930 .450 .100 .190

305S V .100 .960 1.080 .550 .150 .190

305S V-1 .100 .910 1.030 .550 .100 .190

401S & 402S V .130 1.222 1.342 .750 .150 .220

401S & 402S V-1 .130 1.172 1.292 .750 .100 .220

Notes: Terminals are not fully bent, to facilitate spring retention in p.c. board.

PANEL CUTOUT P.C. LAYOUT

DRY CKT. ELECTRICAL

MODEL NO. FUNCTION

301SV-1BEJ8488 MOM. S.P N.O. w/overtravel

302SV-1BEJ8488 MOM. S.P N.O. no overtravel

305SV-1BEJ8488 MOM. S.P N.O. w/added overtravel

401SV-1BEJ8488 S.P Alternate action w/ tactile response

402SV-1BEJ8488 MOM. S.P N.O. w/ tactile response

401 & 402 ONLY

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C28

300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES

Snap-in bezel for round hole mounting

Self-keying against rotation

302SZQEJ9688

DRILLED OR

PUNCHED HOLE KEYED HOLE

POWER CKT. DRY CKT. UL ELECTRICAL

MODEL NO. MODEL NO. MODEL NO. FUNCTION

301SZQEJ9688 301SZBEJ9688 301SZQEJ9688/UL MOM. S.P N.O. w/overtravel

302SZQEJ9688 302SZBEJ9688 302SZQEJ9688/UL MOM. S.P N.O. no overtravel

303SZQEJ9688 303SZBEJ9688 303SZQEJ9688/UL MOM. S.P N.C. w/pretravel

304SZQEJ9688 304SZBEJ9688 304SZQEJ9688/UL MOM. S.P N.C. no ptretravel

305SZQEJ9688 305SZBEJ9688 305SZQEJ9688/UL MOM. S.P N.O. w/overtravel

401SZQEJ9688 401SZBEJ9688 401SZQEJ9688/UL S.P Alternate snap-action

402SZQEJ9688 402SZBEJ9688 402SZQEJ9688/UL MOM. S.P N.O. (snap-action)

MODEL NO. DIM. A DIM. B

301 .108 .929

302 .085 .817

303 .085 .929

304 .085 .817

305 .108 .929

401 & 402 AS SHOWN RECOMMENDED PANEL CUTOUTS

Panel thickness range - .047 - .125

OPTIONS FOR SELECTIVE MODELS ONLY

Options V30 & V40 Straight p.c. terminals w/bracket

For models 301, 302

& 305 only

MODEL NO. *OPTION DIM. A DIM. B DIM C. DIM D.

301,305 V30 .527 .173 .933 .237

301,305 V40 .647 .173 1.053 .118

302 V30 .527 .150 .910 .125

302 V40 .647 .150 1.030 .357

* Options V31 and V41 with crimped leg design also available -

see prior page.

TO SPECIFY, ADD OPTION FROM BOX TO SWITCH MODEL

NO. - EXAMPLE: 302V31BE

P.C. BOARD LAYOUT

Options V & V-1 Right angle terminals w/bracket

For models 301, 302, 305,

401 & 402 only

MODEL NO. OPTION DIM. A DIM. B DIM C. DIM D.

301, 305 V .173 .439 .550 .700

301, 305 V-1 .173 .439 .550 .650

302 V .150 .327 .450 .600

302 V-1 .150 .327 .450 .550

401, 402 V .210 .653 .750 .900

401, 402 V-1 .210 .653 .750 .850

TO SPECIFY, ADD OPTION FROM BOX TO SWITCH MODEL

NO. - EXAMPLE: 301V-1BE

P.C. BOARD LAYOUT

Note: Terminals are not fully bent, to facilitate spring retention in p.c. board.

301, 302

305, 402 303, 304 401

401 & 402 ONLY

Support Bracket is Brass, Solder Coated.

Available with B, N, or T Contact Materials.

(See pg. C29)

Supplied with Epoxy Sealed Terminals.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C29

300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

Allowable options are shown below each respective box with brief description - see option dwgs. & info. following.

Notes: 'NONE' indicates box may be left empty. Not all combinations can be made - see other pages of Series.

Additional ordering information: Commonly ordered models are shown above and on prior pages with complete model numbers

and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model num-

ber by simply selecting from all available options shown and filling in the boxes.

Series Actuators Bushings Terminations Contact materials Sealing

Options:

Bezel& cap Bezel color Cap color Recognitions

(NONE)

J61Snap-in w/LED

J81Snap-in no LED

J84P.C. style

J96Snap-in (round

hole)

(NONE)

T115/32" thd'd.

(see dwg -

for 301,

303 & 305

only).

ZSolder lug

CPrinted circuit

V Right angle p.c. term-

V- 1 inals for 301, 302, 305,

401 & 402 only (see dwg.).

V 3 0 Straight p.c. terminals

V 4 0 with bracket for 301,

V4 0 302 & 305 only

V4 1 (see dwg.).

BGold

QCoin silver

(Not avail-

able with

303 & 304)

NEconomy

gold

TEconomy

silver

(NONE)

2Black

6Red

8White

Other Colors

Available

(NONE)

2Black

6Red

8White

Other Colors

Available

(NONE)

/U L

Example of completely specified

model number:

301SZQEJ8122/UL

301

302

303

304

305

306

401

402

(NONE)

SLong (see

dwg. - specify

for all models

with bezels-

not available

for 306).

S1For

400 Series

switches used

with sealing

boot U5321

only.

Epoxy

terminal

seal is

standard

E

Switch caps for switches without

bezels also available - see Hardware

section of catalog.

OPTIONS FOR SELECTIVE MODELS ONLY

MODEL NO. A

301,305 .250

303 .225

Option S Long actuator

For models 301, 302, 303, 304, 305, 401 & 402 only

TO SPECIFY, ADD 'T1' TO SWITCH MODEL

NO. - EXAMPLE: 301T1CQE6

Threaded bushing: Brass, nickel plated

Actuator button: Nylon. Specify color - see order

format.

Supplied with 2 Hex Nuts, p/n A465 & 1

Lockwasher, p/n A466 (see Hardware section

of catalog).

Printed circuit or solder lug terminals available.

TO SPECIFY, ADD 'S' TO SWITCH MODEL

NO. - EXAMPLE: 301SCQE

Actuator: Nylon

Color: Black standard for 300 Series

White standard for 400 Series.

Other colors available - see options.

NOTE: When using sealing boot U5321 with 400

Series switches, add 'S1' to model number. This option

is not illustrated.

301 & 305 302, 303 & 304 401 & 402

Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question.

Option T1 15/32" bushing mounts from front or rear of panel

For models 301, 303 & 305 only

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C30

300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES

CONTACT MATERIAL OPTIONS

B

Q

G

N

T

Dry circuit - gold over nickel over brass.

RATING: 0.4 Volt-Amps (VA) max. at 20 V max.

ELECTRIC LIFE: 250,000 cycles minimum.

Power circuit - coin silver.

RATING: 1 Amp at 120 VAC or 28 VDC or 0.5 Amps at 250 VAC. ELECTRIC LIFE: 250,000 cycles minimum at full load.

Also - 3 Amps at 120 VAC or 28 VDC or 1.5 Amps at 250 VAC. ELECTRIC LIFE: 10,000 cycles minimum at full load.

Dry circuit or power circuit - gold over nickel over coin silver.

Dry circuit - gold over nickel over coin silver.

RATINGS & ELECTRIC LIFE: Same as B & Q above -i.e.- can be used in either dry circuit or power circuit, however once

used in power circuit, switch cannot be re-used in dry circuit. This option permits customers to inventory one switch to

satisfy either application,

RATING: 0.4 Volt-Amps (VA) max. at 20 V max. Note- less gold than B option.

ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.

Power circuit - Silver plate over brass.

RATING: 0.5 Amps at 120 VAC or 0.25 Amps at 250 VAC (resistive loads).

ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.

Solder dipped terminals and custom

contact plating available - contact factory.

UL OPTION

/UL For power circuits - coin silver

RATING: 0.5 Amps at 250 VAC (75% power factor).

Underwriter Laboratories file no. E66367. Note - applicable only to terminations with coin silver contacts (Q or G options).

PANEL CUT-OUTS

HARDWARE

HARDWARE SUPPLIED

(See Hardware section of catalog)

Panel mounted 300 Series switches with threaded 1/4" bushing are supplied with 1 Hex Nut A112 and 1 Lockwasher A115.

Panel mounted 300 Series switches with threaded 15/32" bushing are supplied with 2 Hex Nuts A465 and 1 Lockwasher A466.

Panel mounted 306 Series switches with threaded 5/16" bushing are supplied with 1 Hex Nut A713 and 1 Lockwasher A734.

Panel mounted 400 Series switches with threaded bushing are supplied with 1 Panel Dress Nut A274 and 1 Lockwasher A115.

Accepts all 1/4" threaded bushings Accepts all 15/32" threaded bushings

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C31

MPB SERIES PUSHBUTTON SWITCHES

MPB1110

FEATURES

● Single pole single throw momentary action.

● Normally open and normally closed models.

● Permanent cap is standard.

● Single hole mounting w/mtg. nut & lk'wshr supplied.

MATERIALS

Base: PBT thermoplastic, color black

Bushing: Brass, nickel plated

Actuator: ABS thermoplastic

Terminals: Brass, silver plated

Shorting Contact: Brass or phos. brz., silver plated

Model No. Cap Color

MPB11102 Black

MPB11106 Red

MPB1140 Model No. Cap Color

MPB11402 Black

MPB11406 Red

NORMALLY OPEN SCHEMATIC MECHANICAL OUTLINE PANEL MTG. HOLE

NORMALLY CLOSED SCHEMATIC MECHANICAL OUTLINE PANEL MTG. HOLE

GENERAL SPECIFICATIONS

ELECTRICALS

Contact rating: 300 mA @ 125 VAC

Insulation resistance: 100 megohms min. (500 VDC)

Dielectric withstanding voltage: 500 VAC for 1 minute

Contact resistance: 25 milliohms max. at 1 amp, 5 VDC

Electrical/Mechanical life: 10,000 cycles min.

Contact bounce: less than 10 milliseconds

MECHANICALS, THERMALS

Plunger travel: MPB1110: .063" (1.6mm) MPB1140: .078" (2mm)

Actuation force: 300 grams ±150 grams

Operating temperature range: -20 °C to +60 °C

SOLDERING

Wave or hand soldering: 235°C max. for 5 seconds max.

Solvent washing: Non-washable. Do not apply flux to terminals or switch mtg. surface

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C32

IP SERIES - PUSHBUTTON SWITCHES FOR HARSH ENVIRONMENTS

FEATURES

ELECTRICAL AND GENERAL SPECIFICATIONS

Contact ratings (resistive loads): 500 mA at 48 VAC, 200 mA at 50 VDC or 200 mA at 250 VAC

Initial contact resistance: 50 milliohms maximum

Insulation resistance: 1 gigohm min. at 500 VDC

Dielectric strength: 1500 V rms min.

Electrical life: 500,000 cycles min. at full load

Mechanical life: 1,000,000 cycles min.

Total Travel: .059" (1.5mm)

Operating force: 10.5 ±4 oz. (3±1 N)

Contact bounce: 10 milliseconds

Panel thickness: .059"-.157" (1.5-4mm)

MATERIALS

Contacts : Gold plated silver

Actuator: Polyamide 6/6

Bushing/bezel: Zamac (black painted)

Case: PBT UL94V-0

Terminal seal: Epoxy

Lens: Polycarbonate

Wire leads (F models): Stranded, 20 AWG, UL approved

Hardware: Supplied with 1 Hex Nut .551" (14mm) across flats and 1 'o'ring

LED SPECIFICATIONS

Super red: Forward current 20mA, luminous intensity up to 125 mcd

Yellow: Forward current 20mA, luminous intensity up to 125 mcd

Green: Forward current 10mA, luminous intensity up to 20 mcd

A resistor must be series connected by the user. LED terminals are tin plated for ease of solderability.

ENVIRONMENTAL SPECIFICATIONS

Degree of protection: IP 67

Shock resistance: 100g per IEC 512-4, test 6c

Vibration resistance: 10-500 Hz, 10g per IEC 512-4, test 6d

Salt spray: Per IEC 512-6, test 11f

Robustness (non-illum. models): IK06 per EN 50102

Operating temperature range: -40°C to +125°C

● Single pole NO or NC/NO combined momentary actions with double break.

● Totally sealed compact construction, illuminated or non-illuminated.

● Ergonomically sculptured bezels with colorful actuator selections.

● Excellent tactile feedback with precise actuation

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C33

IP SERIES - PUSHBUTTON SWITCHES FOR HARSH ENVIRONMENTS

Round - solder lug terminals - non-illuminated

Round - stranded 20 AWG wire leads - non-illuminated

Square - solder lug terminals - non-illuminated

MODEL NO. ACT. COLOR

N/O

IPR3SAD2 BLACK

IPR3SAD6 RED

IPR3SAD7/1 WHITE

NC/NO combined

IPR5SAD2 BLACK

IPR5SAD6 RED

IPR5SAD7/1 WHITE

Square - stranded 20 AWG wire leads - non-illuminated

Flat

MODEL NO. ACT. COLOR

N/O

IPR3FAD2 BLACK

IPR3FAD6 RED

IPR3FAD7/1 WHITE

NC/NO combined

IPR5FAD2 BLACK

IPR5FAD6 RED

IPR5FAD7/1 WHITE

MODEL NO. ACT. COLOR

N/O

IPC3SAD2 BLACK

IPC3SAD6 RED

IPC3SAD7/1 WHITE

NC/NO combined

IPC5SAD2 BLACK

IPC5SAD6 RED

IPC5SAD7/1 WHITE

New!

MODEL NO. ACT. COLOR

N/O

IPC3FAD2 BLACK

IPC3FAD6 RED

IPC3FAD7/1 WHITE

NC/NO combined

IPC5FAD2 BLACK

IPC5FAD6 RED

IPC5FAD7/1 WHITE

New!

Wire colors: NO black, NC blue

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C34

IP SERIES - PUSHBUTTON SWITCHES FOR HARSH ENVIRONMENTS

Round - solder lug terminals - illuminated

Round - stranded 20 AWG wire leads - illuminated

Square - solder lug terminals - illuminated

MODEL NO. ACT. COLOR

N/O

IPR3SAD2L0S BLACK

IPR3SAD6L0S RED

IPR3SAD7/1L0S WHITE

Above models have super red LED

Square - stranded 20 AWG wire leads - illuminated

Flat

MODEL NO. ACT. COLOR

N/O

IPC3SAD2L0S BLACK

IPC3SAD6L0S RED

IPC3SAD7/1L0S WHITE

Above models have super red LED

Wire colors: NO black, LED anode (+) red, LED cathode (-) blue

New!

Flat

MODEL NO. ACT. COLOR

N/O

IPC3FAD2L0S BLACK

IPC3FAD6L0S RED

IPC3FAD7/1L0S WHITE

Above models have super red LED

MODEL NO. ACT. COLOR

N/O

IPR3FAD2L0S BLACK

IPR3FAD6L0S RED

IPR3FAD7/1L0S WHITE

Above models have super red LED

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with allowable options shown below each respective box.

Additional ordering information: Commonly ordered models are shown on prior page with complete model numbers and spec-

ifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by

simply selecting from all available options shown and filling in the boxes.

I

SSolder lugs

FStranded wire

leads

IP SERIES - PUSHBUTTON SWITCHES FOR HARSH ENVIRONMENTS

Series Bezel Electrical Terminals Contacts Actuator LED

shape function color color

3Normally

open (NO)

5NC/NO

combined

(non-illum.)

Gold

plated

silver

C35

P

MOUNTING

Per IP 67. Degree of protection provided by the enclosures of electric appliances according to IEC 529, DIN 40050

& NFC 20-010 shown below:

IP 6 7

(ingress protection) Totally protected Protected against the effects of

against dust immersion up to 1 meter of water (30 mins.)

SOLDER LUG

VERSION

WIRE LEADS

VERSION

RRound

CSquare

1Blue

2Black

3Green

5Yellow

6Red

7 / 1 White

9Orange

A D

Panel cut-out Matrix mounting Back of panel space requirement

MISCELLANEOUS

Operating

force

vs.

travel

diagram

Switch cross sections seals 1 & 2, elastomer membrane & 0-ring are typical.

SEALING

(NONE) Non-illum.

L0SSuper red

L0YYellow

L0GGreen

Function 3 (NO) non-illum Function 3 (NO) illuminated Function 5 (NC/NO)

Illustrations show

non-illuminated

models only.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

IP SERIES - PUSHBUTTON SWITCHES FOR HARSH ENVIRONMENTS

C36

LED LUMINANCE MEASUREMENT MODE

ADDITIONAL SEALING

For round units only,

illuminated or non-illuminated.

Transparent silicone overboot U5125

(transparent) or U5125-2 (black) for

protection against frost and abrasion

by sand.

Order separately.

Operating temperature: -40°C to 125°C.

Note: The switches remain sealed to IP67 even if

the boot is eventually perforated.

2

TEST CONDITIONS: Measured in a dark room

New!

TEST RESULTS*

LED Luminance Forward

types current

LOS (super red) 4500 Cd/m 20mA

LOY (yellow) 5000 Cd/m 20MA

LOG (green) 500 Cd/m 10mA

* - in our lab conditions

U5125

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C37

IB & IS SERIES - SEALED MINIATURE PUSHBUTTON SWITCHES

FEATURES

ELECTRICAL AND GENERAL SPECIFICATIONS

Contact ratings (resistive loads): 400 mA at 32 VAC, 100 mA at 50 VDC or 125 mA at 125 VAC

Initial contact resistance: 50 milliohms maximum

Insulation resistance: 1 gigohm min. at 500 VDC

Dielectric strength: 1000 V rms min.

Electrical life: 500,000 cycles min. at full load

Mechanical life: 1,000,000 cycles min.

Total Travel: .059" (1.5mm)

Operating force: 10.5 ±4 oz. (3±1 N)

Contact bounce: 10 millisecond

Panel thickness: IB: .031"-.071" (0.8-1.8mm) IS: .059"-.157" (1.5-4mm)

MATERIALS

Contacts : Gold plated silver

Actuator: Polyamide 6/6

Bushing/bezel: Polyamide 6/6

Case: Thermoplastic UL94V-0

Terminal seal: Epoxy

Hardware: IB: Supplied with 1 flat seal IS: Supplied with 1 Hex Nut .551" (14mm) across

flats and 1 flat seal.

ENVIRONMENTAL SPECIFICATIONS

Degree of protection: IP 67

Shock resistance: 100g per IEC 512-4, test 6c

Vibration resistance: 10-500 Hz, 10g per IEC 512-4, test 6d

Salt spray: Per IEC 512-6, test 11f

Operating temperature range: -40°C to +125°C

● Single pole NO momentary action with double break.

● Totally sealed compact construction with behind-the-panel depth of only .512" (13mm) .

● Ergonomically sculptured bezels with colorful actuator selections.

● Excellent tactile feedback with precise actuation

● Flat top on actuator allows marking

New!

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C38

IB & IS SERIES - SEALED MINIATURE PUSHBUTTON SWITCHES

Round - snap-in mounting

Round - threaded bushing mounting

MODEL NO. ACT. COLOR

Normally open

IBR3SAD2 BLACK

IBR3SAD6 RED

IBR3SAD7/1 WHITE

Flat

MODEL NO. ACT. COLOR

Normally open

ISR3SAD2 BLACK

ISR3SAD6 RED

ISR3SAD7/1 WHITE

.Panel thickness: .059" (1.5mm) to .157" (4mm)

New!

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with allowable options shown below each respective box.

Additional ordering information: Commonly ordered models are shown on prior page with complete model numbers and spec-

ifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by

simply selecting from all available options shown and filling in the boxes.

Solder lugs

Series Bezel Electrical Terminals Contacts Actuator Bushing & bezel

shape function color finish

Normally

open (NO)

Gold plated

silver

Round 1Blue

2Black

3Green

5Yellow

6Red

7 / 1 White

9Orange

A D

00Black (std)

08Chrome plated

(IS only)

10White

I B Snap-in

ISThreaded

bushing

R3S

MISCELLANEOUS

Operating

force

vs.

travel

diagram

Switch cross section

1 Elastomer membrane seal

2 Flat panel seal

Function 3 (NO)

.Panel thickness: .031" (0.8mm) to .071" (1.8mm)

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

IB & IS SERIES - SEALED MINIATURE PUSHBUTTON SWITCHES

C39

IB SERIES MOUNTING

Panel cut-out Matrix mounting

New!

IS SERIES MOUNTING

ADDITIONAL SEALING

For round units only,

illuminated or non-illuminated.

Transparent silicone overboot U5125

(transparent) or U5125-2 (black) for

protection against frost and abrasion

by sand.

Order separately.

Operating temperature: -40°C to 125°C.

Note: The switches remain sealed to IP67 even if

the rated.

Panel cut-out Matrix mounting

U5125

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C40

SP SERIES - WASHABLE MINIATURE SNAP-ACTION PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts & Terminals: Gold plated brass, silver or gold plated silver

Actuator: UL94V-0 polyamide, glass filled

Bracket: Tin plated steel

Case: UL94V-0 polyamide, glass filled or PES

Terminal seal: Epoxy

Hardware: 1/4" threaded bushing models supplied with 2 Hex Nuts .314" (8mm) across

flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog.

SPECIFICATIONS

Contact ratings (resistive loads): Gold plated brass: 100 mA at 30 VDC

Silver or gold plated silver: 1 Amp at 120 VAC or 30 VDC

Initial contact resistance: 50 milliohms maximum

Insulation resistance: 1000 megohms minimum

Dielectric strength: 1000 V rms minimum

Electrical life: 60,000 cycles minimum

Operating temperature range: -20°C to +85°C

Washing: Permissible with water, detergents and solvents.

● Wave solderable.

● Compact case size & fully sealed for process compatibility.

● SPDT & DPDT momentary p.c. & panel mounting models.

● Models available with ESD protection up to 12 KV.

Plain bushing - straight p.c. terminals - gold plated brass contacts

DP

SP

AGENCY RECOGNITION Available with all models with silver or gold plated silver contacts and

terminals, standard actuator and smooth bushing. UL marking supplied when

specified - see Order Format.

(.122 DIA) (.122 DIA) (.208) (.244 DIA) (.244 DIA)

(.167) (.167)

(.425) (.425) (.248) (.248)

(.281) (.281)

(.187) (.187) (.023) (.023)

(.185)

(.259) (.446)

(.500) (.500)

(.185) (.185)

(.187)

(.062 DIA) (.062 DIA)

4.25 4.25

6.30 6.30 10.80 10.80

7.16 7.16

4.70 4.70 4.70 4.70

11.35

5.30 5.30 6.20 DIA6.20 DIA3.10 DIA 3.10 DIA

0.60

6.60

12.70

0.60 0.60

4.70 4.70

4.75 4.75

1.60 DIA 1.60 DIA

EPOXY EPOXY

1 2 3

SINGLE POLE

MODEL NO. CIRCUIT

SP35P000000 ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

SP45P000000 ON MOM

Button position:

Terminals connected: 1-3 1-2

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C41

SP SERIES - WASHABLE MINIATURE SNAP-ACTION PUSHBUTTON SWITCHES

Plain bushing - bracket mounting - gold plated brass contacts

SINGLE POLE

MODEL NO. CIRCUIT

SP35Y000000 ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

SP45Y000000 ON MOM

Button position:

Terminals connected: 1-3 1-2

Plain bushing - horizontal right angle terminals - gold plated brass contacts

SINGLE POLE

MODEL NO. CIRCUIT

SP35W000000 ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

SP45W000000 ON MOM

Button position:

Terminals connected: 1-3 1-2

Plain bushing - vertical right angle terminals - gold plated brass contacts

SINGLE POLE

MODEL NO. CIRCUIT

SP35WW00000 ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

SP45WW00000 ON MOM

Button position:

Terminals connected: 1-3 1-2

Threaded bushing - solder lug terminals - gold plated brass contacts

SINGLE POLE

MODEL NO. CIRCUIT

SP35S000077 ON MOM

Button position:

Terminals connected: 1-3 1-2

2.45

10.80

8.90

4.70

12.70

1.80

6.60

6.35 DIA-40UNS

EPOXY

(.185)

(.096)

(.500)

(.259)

(1/4 40UNS)

(.070)

(.350)

(.425)

(.179)

(.122 DIA)

3.10 DIA

4.56

1 2 3

(.023)

0.60

DPSP

(.122 DIA)

3.10 DIA

(.244 DIA)

6.20 DIA

(.208)

(.281)

7.16

5.30

(.500) (.240)

(.150)

(.023)

(.185)

(.153)

(.468)

(.271)

(.015)

(.500)

(.374)

(.023)

(.500)

EPOXY

(.500)

(.150)

(.200)

(.185)

(.062 DIA)

3.90

6.90

12.70

4.70

0.60

11.65

3.90

1.60 DIA

5.08

4.70

3.81 12.70 12.70

0.40

12.70 3.81

0.60

9.50

12.70 6.10

3

2

1

5.08

(.200)

5.30

7.16

(.281)

(.208)

3.10 DIA

(.122 DIA)

6.20 DIA

(.244 DIA)

(.500)

(.150)

(.240)

(.122)

(.511)

(.023)

(.187)

(.023)

(.374)

(.446)

(.259)

EPOXY

(.150)

(.500)

(.150)

(.500)

5.08

(.200)

1.60 DIA

(.062 DIA)

(.187)

0.60

6.60

13.00

3.10

4.75

11.35

4.75

(.015)

0.40

6.10

12.70

3.81

9.50

12.70

3.81

12.70

0.60

3 2 1

(.200)

5.08

SP

DP

SPDP

Keyway

3.10 DIA

(.122 DIA)

6.20 DIA

(.244 DIA)

5.30

7.16

(.281)

(.208)

(.125)

(.185)

(.620)

(.015)

(.185) (.460)

(.232)

(.046)

(.318)

(.125)

(.185)

(.620)

(.185)

(.620)

(.125)

(.187)

(.062 DIA)

3.18

4.75

1.60 DIA

1.17

0.40

4.70

15.75

3.18

8.10

11.70

5.90

4.70

15.75 15.75

EPOXY

(.446)

11.35

1

2

3

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C42

SP SERIES - WASHABLE MINIATURE SNAP-ACTION PUSHBUTTON SWITCHES

Threaded bushing - straight p.c. terminals - gold plated brass contacts

SINGLE POLE

MODEL NO. CIRCUIT

SP35P000077 ON MOM

Button position:

Terminals connected: 1-3 1-2

Series Number of poles Electrical function Terminals

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

(Allowable options are shown under each respective box).

Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications.

Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply

selecting from all available options shown and filling in the boxes.

S

P0Straight pc

S0Solder lug

Y0Straight pc with

mounting bracket

W0 Horizontal right

angle mounting

WWVertical right

angle mounting

3Single pole

4Double pole

5ON MOM

Options:

0000 Standard actuator w/smooth bushing

0001 Standard actuator w/smooth bushing & UL marking

(UL available with silver or gold plated silver

contacts & terminals only)

0077 Standard actuator w/threaded bushing

0276 Short actuator w/short smooth bushing

(See actuator/ bushing drawings at bottom of this page)

Contact & terminal materials Actuators and bushings

P

Example of completely specified

model number: SP35Y080000

ACTUATOR/BUSHING DRAWINGS

0000 Standard actuator 0077 Standard actuator 0276 Short actuator with

w/smooth bushing w/threaded bushing short smooth bushing S0 Solder lug P0 Straight printed circuit

TERMINAL OUTLINES

OPTION DRAWINGS

Caps available separately -

see option drawings on next page.

1.10

(.043)

1.90

(.070)

1.90

(.074)

(.096)

2.45

(.023)

(.167)

4.25

0.60

(.200)

(.165)

5.10

4.20

3.10 DIA

(.122 DIA)

(.248)

(.281)

6.30

7.16

3.10 DIA

(.122 DIA)

(.350)

8.90

(.179)

(.122 DIA)

4.56

3.10 DIA

Keyway

4.70

1.60 DIA

(.062 DIA)

(.185)

(.425) (.350)

(1/4 40UNS)

(.259)

(.500)

(.185)

EPOXY

6.35 DIA-40UNS

6.60

12.70

4.70

8.9010.80 4.56

3.10 DIA

(.122 DIA)

(.179)

1 2 3

(.023)

0.60

(.023)

4.25

(.167)

0Brass, gold plated

1Silver

2Silver, gold plated

8Brass, gold plated,

with, tin plated

terminals

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C43

SP SERIES - WASHABLE MINIATURE SNAP-ACTION PUSHBUTTON SWITCHES

OPTION DRAWINGS & MISCELLANEOUS

CAPS Note: replace last '0' in p/n with color code.

U2400 U2510 U2130 U2900

U3400 U910 U2340

Colors

1blue

2black

3green

4grey

5yellow

6red

7/1 white

9orange

DRESS NUTS Chrome plated For threaded bushing models only.

U1636 (for cap U2510) U825 (for cap U3400) U840 (for cap U2900) For threaded bushing models

PANEL CUT-OUT

INSULATED

Protects against electrostatic

discharges (ESD) up to 12 KV.

X978 - Consult factory

ELECTROSTATICALLY PROTECTED PUSHBUTTON SWITCHES

(.322 DIA)

(.500 DIA)

(1/4-40UNS)

(.322)

(.244)

12.70 DIA

8.20 DIA

6.20

8.20

6.35 DIA-40UNS

(.610 DIA)

(.728 DIA)

18.50 DIA

15.50 DIA

6.35 DIA-40UNS

(1/4-40UNS)

8.00

(.314)

(.228)

5.80

(.413 DIA) (.413 DIA)

(.531 DIA) (.531 DIA)

(.314) (.314)

(.228) (.228)

10.50 DIA10.50 DIA

13.50 DIA13.50 DIA

5.80 5.80

8.00 8.00

6.35 DIA-40UNS 6.35 DIA-40UNS

(1/4-40UNS) (1/4-40UNS)

(.250)

(.118)

(.314 DIA)

3.00

6.35

8.00 DIA

(.295)

(.118)

(.393 DIA)

3.00

7.50

10.00 DIA

(.370 DIA)

(.250)

(.129)

3.30

6.35

9.40 DIA

6.50 DIA

2.20 DIA

5.20

(.255 DIA)

(.086 DIA)

(.204)

(.393)

(.137)

(.590 DIA)

10.00

3.50

15.00 DIA

(.157)

(.106)

(.452 SQ)

4.00

2.70

11.50x11.50

(.452 SQ)

(.196)

(.236)

5.00

6.00

11.50x11.50

(.157)

(.196)

(.129)

4.00

3.30

5.00 DIA

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C44

18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts & Terminals: Gold plated brass or gold plated silver

Actuator: Polyamide, glass filled

Bushing: Nickel plated brass

Housing: Stainless steel

Case: Diallyl phthalate

Bracket: Tin plated steel

Terminal seal: Epoxy

Hardware: 1/4" threaded bushing models supplied with 2 Hex Nuts .314" (8mm) across

flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog.

SPECIFICATIONS

Contact ratings (resistive loads): Gold plated brass: 100 mA at 30 VDC

Gold plated silver: 1A at 120VAC or 30VDC

Initial contact resistance: 50 milliohms maximum

Insulation resistance: 1000 megohms minimum

Dielectric strength: 1000 V rms minimum

Electrical life: 60,000 cycles minimum at full load.

Operating temperature range: -30°C to +65°C

Total travel: .019" (0.5mm)

SINGLE POLE

MODEL NO. CIRCUIT

18535AD ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

18545AD ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

Solder lug terminals - 1/4" (6.35mm) bushing - gold plated silver contacts

ABOUT THIS SERIES The material is organized in the following sequence:

a. completely specified switch models.

b. 'Build your own switch' order format.

c. Options & miscellaneous

● Single pole-double throw & double pole-double throw models with ON-MOM ON action.

● Epoxy terminal sealing standard.

● Panel and p.c. mounting models with compact miniature case size.

Keyway

(.023)

(.185)

(.187)

(.275)

(.472)

7.00

0.60

4.70

12.00

4.75

EPOXY

(.039)

(.314)

(.236)

(.157 DIA)

(1/4-40UNS)

8.00

6.00

1.00

4.00 DIA

6.35 DIA-40UNS

(.472)

(.145)

(.070)

3.70

12.00

1.80

(.519)

13.20

1 2 3

SP

DP

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C45

18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES

SINGLE POLE

MODEL NO. CIRCUIT

18835AD+U912+U1202 ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

18845AD+U912+U1202 ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

Above models have back bezel & cap

Solder lug terminals - snap-in mounting - gold plated silver contacts

Solder lug terminals - 1/4" (6.35mm) flatted bushing - gold plated silver contacts

Straight p.c. terminals - 1/4" (6.35mm) bushing - gold plated silver contacts

SINGLE POLE

MODEL NO. CIRCUIT

18935AD ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

18945AD ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

Straight p.c. terminals - 1/4" (6.35mm) flatted bushing - gold plated silver contacts

SINGLE POLE

MODEL NO. CIRCUIT

18235AD ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

18245AD ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

SINGLE POLE

MODEL NO. CIRCUIT

18735AD ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

18745AD ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

(.185) (.185)

(.187) (.187)

(.062 DIA) (.062 DIA)

1.60 DIA 1.60 DIA

4.75 4.75

4.70 4.70 4.70 4.70

6.35 DIA-40UNS 6.35 DIA-40UNS

13.35 13.35

1.00 1.00

6.00 6.00 8.00 8.00

(1/4-40UNS) (1/4-40UNS)

(.236) (.236) (.314) (.314)

(.039) (.039)

(.523) (.523)

EPOXY EPOXY

4.75 4.75

12.00 12.00 4.70 4.70

0.60 0.60

7.00 7.00

(.472) (.472) (.275) (.275)

(.187) (.187)

(.185) (.185)

(.023) (.023) (.023) (.023)

(.161) (.161)

4.10 4.10

0.60 0.60

4.00 DIA 4.00 DIA

(.157 DIA) (.157 DIA)

13.20 13.20

(.519) (.519)

1 2 3 1 2 3

3.70 3.70 16.50 16.50

19.50

15.70

(.618)

(.767)

(.145) (.649)

2.50 Maxi 2.50 Maxi

(.098 MAX) (.098 MAX) (.078)

2.00

(.023)

(.185)

0.60

4.70

EPOXY

(.187)

(.472)

12.00

4.75

(.070)

(.275)

7.00

1.80

(.161)

(.452)

(.519)

13.20

11.50

4.10

11.50

(.452)

1 2 3

1.80

12.00 3.70

(.070)

(.145) (.472)

6.35 DIA-40UNS

1.00

6.00 8.00

(1/4-40UNS)

(.236) (.314)

(.039)

1 2 3

EPOXY

4.75

12.00

4.70

0.60

7.00

(.472)

(.275)

(.187)

(.185)

(.023)

(.224)

5.70

4.00 DIA

(.157 DIA)

13.20

(.519)

0.60

4.10

(.161)

(.023)

(.185)

(.187)

(.275)

(.472)

7.00

0.60

4.70

12.00

4.75

EPOXY

4.70

4.75

1.60 DIA

(.062 DIA)

(.187)

(.185) (.185)

(.523)

(.039)

(.314) (.236)

(1/4-40UNS)

8.00 6.00

1.00

13.35

6.35 DIA-40UNS

(.224)

5.70

4.00 DIA

(.157 DIA)

(.519)

13.20

1 2 3

'D' flat

Keyway

'D' flat

DPSP

SPDP

DPSP

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C46

18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES

PANEL CUT-OUTS for models shown above

1/4" (6.35mm) bushing 1/4" (6.35mm) flatted bush. Bezel U1200 Bezel U1210 w/LED

SINGLE POLE

MODEL NO. CIRCUIT

18235YCD3 ON MOM

Handle position:

Terms. connected: 1-3 1-2

Single pole - straight p.c. terminals - bracket mounting - gold plated brass contacts

Double pole - straight p.c. terminals - bracket mounting - gold plated brass contacts

SINGLE POLE

MODEL NO. CIRCUIT

18235WCD3 ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

18245WCD3 ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

Horizontal right angle p.c. terminals - gold plated brass contacts

DOUBLE POLE

MODEL NO. CIRCUIT

18245YCD3 ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

6.50 DIA

2.20 DIA

5.20

(.255 DIA)

(.086 DIA)

(.204)

(.106)

2.70

6.50 DIA

(.255 DIA)

(.125) (.125)

(.511) (.511) (.161) (.161)

4.10 4.10 13.00 13.00

3.18 3.18

15.75 15.75

(.620) (.620)

3.18 3.18

(.125) (.125)

(.185) (.185)

4.70 4.70

EPOXY EPOXY

(.062 DIA) (.062 DIA)

1.60 DIA1.60 DIA

4.00 DIA4.00 DIA

(.157 DIA) (.157 DIA) (.246 DIA) (.246 DIA)

6.25 DIA6.25 DIA

(.267) (.267) (.216) (.216)

5.50 5.50 6.80 6.80

1.27 1.27

(.015) (.015)

(.050) (.050)

(.620) (.620)

15.75 15.75

1 1 2 2 3 3

(.275) (.275)

7.00 7.00

0.40 0.40

(.620) (.620)

15.75 15.75

(.125) (.125)

3.18 3.18

15.75 15.75

3.18 3.18 (.620) (.620)

(.125) (.125)

4.75 4.75

6.25 DIA 6.25 DIA

8.20 8.20

4.70 4.70

(.185) (.185)

(.187) (.187)

(.322) (.322) (.246 DIA) (.246 DIA)

(.472) (.472)

(.511) (.511) (.185) (.185)

12.00 12.00

4.70 4.70 13.00 13.00

EPOXY EPOXY

(.062 DIA) (.062 DIA)

1.60 DIA1.60 DIA

3 3

2 2

1 1

(.283) (.283) (.200) (.200)

(.157 DIA) (.157 DIA)

5.10 5.10 7.20 7.20

4.00 DIA4.00 DIA

(.050) (.050)

(.015) (.015)

0.40 0.40

1.27 1.27

(.200)

(.500) (.150)

5.08

12.70 3.81 12.70

5.08

(.500)

(.200)

4.70

(.185)

4.70

(.185)

1.60 DIA

(.062 DIA)

(.433) (.283) (.216)

(.500) (.338)

(.023) (.015)

(.275)

(.145)

(.023)

(.185)

(.246 DIA)

(.157 DIA)

(.500) (.338) (.150)

(.015)

(.472)

(.519)

8.60

0.40

12.70

11.00 7.20 5.50

0.60

3.81 12.70

0.40

8.60

3.70

7.00

6.25 DIA

4.00 DIA

0.60

4.70

13.20

12.00

EPOXY

3 2 1

(.590) (.590)

(.519)

(.492)

(.314 DIA)

15.00 15.00

8.00 DIA

13.20

12.50

SPDP

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C47

18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES

Special option X662 - straight p.c. terminals - snap-in mounting - gold plated brass contacts

Special option X624 - straight p.c. terminals - short bushing & actuator - gold plated brass contacts

SINGLE POLE

MODEL NO. CIRCUIT

18235YCD2X624 ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

18245YCD2X624 ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

SINGLE POLE

MODEL NO. CIRCUIT

18835CDX662+U910+U1200 ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

18845CDX662+U910+U1200 ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

SPECIAL F Tin plated terminals (for p.c. terminals only).

OPTIONS X371 .246" (6.25mm) smooth bushing in place of standard threaded bushing.

X372 Short 1/4" (6.35mm) threaded bushing, .274" (7mm) long.

X386 1/4" (6.35mm) threaded bushing in place of smooth bushing on models with W, WW & Y options.

X438 .246" (6.25mm) smooth bushing without shoulder, .283" (7.2mm) long.

X371 X386

X372 X438

(.236)

(.039)

6.00

1.00

6.25 DIA

(.246 DIA)

(.275)

(.039)

7.00

1.00

6.35 DIA-40UNS

(1/4-40UNS)

(.354)

(.039)

9.00

1.00

6.35 DIA-40UNS

(1/4-40UNS)

(.283)

(.246 DIA)

6.25 DIA

7.20

19.50

15.70

(.618)

(.767)

2.50 Maxi

(.098 MAX) (.078)

2.00

(.023)

(.185)

0.60

4.70

1 2 3

EPOXY

(.187)

(.472)

12.00

4.75

(.275)

7.00

(.161)

(.452)

(.519)

13.20

11.50

4.10

11.50

(.452)

(.023)

0.60

(.700) (.161)

4.10 17.80

(.185)

(.187)

(.062 DIA)

1.60 DIA

4.75

4.70 4.70

DPSP

SINGLE POLE

MODEL NO. CIRCUIT

18235WWCD3 ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

18245WWCD3 ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

Vertical right angle p.c. terminals - gold plated brass contacts

(.500)

(.269)

(.150)

(.433)

(.283)

(.216)

(.023)

(.015)

(.157 DIA)

(.246 DIA)

(.472)

(.023)

(.275)

(.187)

4.75

12.00

4.00 DIA

6.25 DIA

0.60

7.00

3.81

0.60

0.40

12.70

6.85

5.50

7.20

11.00

EPO

XY

(.519)

(.118)

3.00

13.20

(.500)

(.150)

(.500)

(.150)

(.062 DIA)

(.187)

(.200)

4.75

5.08

1.60 DIA

3.81

12.70

3.81

12.70

1

2

3

5.08

(.200)

(.125)

(.511)(.161)

4.10 13.00

3.18

15.75

(.620)

3.18

(.125)

(.185)

4.70

EPOXY

1.27

(.015)

(.050)

(.620)

15.75

123

(.275)

7.00

0.40

5.20 DIA 3.10 DIA

(.204 DIA) (.122 DIA)

(.161) (.149)

3.804.10

(.620)

15.75

(.125)

3.18

(.125)

4.75

8.20

4.70

(.185)

(.187)

(.322)

(.472)

12.00

(.062 DIA)

1.60 DIA

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C48

18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES

Series Terminals & bushings Number of poles Electrical function Terminals

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

(Allowable options are shown under each respective box).

Note: 'NONE' indicates box may be left empty.

Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications.

Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply

selecting from all available options shown and filling in the boxes.

3Single pole

4Double pole

ON - MOM

ADSilver, gold plated

CDBrass, gold plated

Options:

Contact materials Actuators Special options

Example of completely specified

model number:18245AD

2Straight p.c. terminals with 1/4"

(6.35mm) threaded bushing.

Straight p.c. terms. + bracket

or right angle p.c. terms. with

smooth bushing

5Solder lug terminals with 1/4"

(6.35mm) threaded bushing

7Solder lug terminals with 1/4"

(6.35mm) flatted bushing

8Solder lug terminals, snap-in

mounting

9Straight p.c. terminals with 1/4"

(6.35mm) flatted bushing

(NONE) Solder lug or straight p.c.

WHorizontal right angle p.c.

WW Vertical right angle p.c.

YBracket mounting

(NONE)

FTin plated terminals-

for p.c. terms. only

X624 Shorter bushing & actuator

X662 Snap-in mounting & straight

p.c. terminals

Others listed - see Special Option page

Caps available separately -

see option drawings.

(NONE)) .157" (4mm) dia. x .236" (6mm) long

(standard) with threaded bushing

6.122" (3.1mm) dia. x .230" (5.85mm)

with threaded bushing

3.157" (4mm) dia. x .216" (5.5mm) long

(standard) with smooth bushing

5.122" (3.1mm) dia. x .248" (6.3mm) long

81 5

ACTUATOR OPTIONS

(NONE) Standard with threaded bushing 6 3 Standard with smooth bushing

5

SWITCH ACTION TERMINALS

Arrow indicates keyway Solder lug Straight p.c.

Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question.

1.00

7.20

(.039)

(.283)

3.10 DIA

(.122 DIA)

(.301)

7.65

5.85

(.230)

1.00

9.00

(.039)

(.354)

(.122 DIA)

3.10 DIA

4.00 DIA

1.00

5.50

7.20

(.157 DIA)

(.039)

(.216)

(.283)

1.00

9.00

(.039)

(.354)

4.00 DIA

(.157 DIA)

(.145)

3.70

6.30

3.10 DIA

(.122 DIA)

(.248)

(.283)

(.039)

7.20

1.00

(.354)

(.039)

9.00

1.00

3.10 DIA

(.122 DIA)

(.177)

4.50

(.283)

(.039)

7.20

1.00

4.00 DIA

(.157 DIA)

(.307)

7.80

(.354)

(.039)

9.00

1.00

(.236)

(.157 DIA)

4.00 DIA

6.00

1 2 3

(.070) (.070)

(.145) (.145)

(.078) (.078)

3.70 3.70

2.00 2.00

1.80 1.80

(.039) (.039)

1.00 1.00

(.216)

(.161)

(.023)

5.50

4.10

0.60

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C49

18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES

CAPS

FOR .157" (4mm) DIA. ACTUATORS (13 & 3) Note: replace last '0' in p/n with color code.

U900 U1140 U1720 U480

U630 U2430 Square U2020 Square

Colors

1blue

2black

3green

4grey

5yellow

6red

7ivory

7/1 white

9orange

FOR .122" (3.1mm) DIA. ACTUATORS (5 & 6) Note: replace last '0' in p/n with color code.

U2400 U2510 U2130

U2900 U3400 U910 Square U2340 Square

FOR 188.. & 188..X662 MODELS Note: replace '0' in p/n with color code.

U910 Square U2340 Square

DRESS NUTS Chrome plated For models with threaded bushings (182.., 185.., 187.., & 189..) (Order separately)

U1636 For caps U1140 & U2510 U840 For caps U480 & U2900 U825 For caps U630 & U3400

(.322 DIA)

(.500 DIA)

(1/4-40UNS)

(.322)

(.244)

12.70 DIA

8.20 DIA

6.20

8.20

6.35 DIA-40UNS

(.610 DIA)

(.728 DIA)

18.50 DIA

15.50 DIA

6.35 DIA-40UNS

(1/4-40UNS)

8.00

(.314)

(.228)

5.80

(.413 DIA)

(.531 DIA)

(.314)

(.228)

10.50 DIA

13.50 DIA

5.80

8.00

6.35 DIA-40UNS

(1/4-40UNS)

(.157)

(.196)

(.129)

4.00

3.30

5.00 DIA

(.250)

(.314 DIA)

(.118)

3.00

6.35

8.00 DIA

(.118) (.118)

(.370) (.370)

(.250) (.250)

3.00 3.00

6.35 6.35

9.40 DIA 9.40 DIA

(.118)

(.393)

(.295)

10.00 DIA

7.50

3.00

(.590 DIA)

(.393)

(.118)

3.00

10.00

15.00 DIA

(.452 SQ)

(.157)

(.196)

4.00

3.00

11.50x11.50

(.236)

(.452 SQ)

(.195)

6.00

5.00

11.50x11.50

(.295)

(.118)

(.393 DIA)

3.00

7.50

10.00 DIA

(.370 DIA)

(.250)

(.129)

3.30

6.35

9.40 DIA

(.295)

(.118)

(.393 DIA)

3.00

7.50

10.00 DIA

(.393)

(.137)

(.590 DIA)

10.00

3.50

15.00 DIA

(.157)

(.106)

(.452 SQ)

4.00

2.70

11.50x11.50

(.157)

(.106)

(.452 SQ)

4.00

2.70

11.50x11.50

(.452 SQ)

(.196)

(.236)

5.00

6.00

11.50x11.50

(.452 SQ)

(.196)

(.236)

5.00

6.00

11.50x11.50

(.157)

(.129)

(.196 DIA)

3.30

4.00

5.00 DIA

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C50

18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES

STANDARD PANEL MOUNTING FOR BEZELS

BEZELS Note: replace last '0' in p/n with color code

U1200 U1210 For LED (not supplied) U3200

For snap-in models (188.. & 188..X662) For bracket mtg. models (182..Y & 182..YX624)

Colors

1blue

2black

3green

4grey

5yellow

6red

7ivory

7/1 white

9orange

188.. + U910 + U1200 188.. + U910 + U1210

Panel thicknesses: .039" (1mm) to .098" (2.5mm)

(.618)

(.476)

(.767)

(.078)

12.10

19.50

2.00

12.10

15.70

12.10

(.476)

(.618)

(.476)

(.078)

(.196)

(1.102)

(.519)

(.196 DIA)

(.279 DIA)

13.20

5.00 DIA

28.00

2.00

5.00

12.10

7.10 DIA

(.383)

9.75

15.70

12.10

2.00

19.50

12.10

(.078)

(.767)

(.476)

(.618)

(.188)

4.80

(.161)

2.00

(.078)

4.10

(.161)

(.078)

2.00

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C51

8000 SERIES - MINI. MOMENTARY OR ALTERNATE ACTION PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts & Terminals: Gold plated brass or gold plated silver

Actuator: Nickel plated brass

Bushing: Nickel plated brass

Housing: Stainless steel

Case: Diallyl phthalate

Terminal seal: Epoxy

Hardware: 1/4" threaded bushing models supplied with 2 Hex Nuts .314" (8mm) across

flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog.

SPECIFICATIONS

Contact ratings (resistive loads): Gold plated brass: 0.4 Volt-Amps max. at 20 V (AC or DC)

Silver: 3A 250VAC, 6A 125VAC or 4A 30VDC

Initial contact resistance: 10 milliohms maximum

Insulation resistance: 1000 megohms minimum at 500 VDC

Dielectric strength: 2000 V rms min. between terminals and frame. 1000 V rms between terminals.

Electrical life: 30,000 cycles minimum at full load.

Operating temperature range: -40°C to +85°C

Travel: Pre-travel - .086" (2.2mm) Over-travel - .019" (0.5mm)

Total-travel - .106" (2.7mm)

Actuation force: 8432, 8632 & 8646 - 800±300gms. 8436 - 550±150gms.

8442 & 8642 - 1150±150gms. 8446 & 8646 - 750±250gms.

AGENCY LISTINGS To order switches marked UL, specify in approvals box of Order Format.

SINGLE POLE

MODEL NO. CIRCUIT

8632AB ON MOM

8636AB ON ON

DOUBLE POLE

MODEL NO. CIRCUIT

8642AB ON MOM

8646AB ON ON

Actuator position:

Terms. connected: 2-3 1-2

5-6 4-5

Solder lug terminals - 1/4" (6.35mm) bushing - silver contacts

Keyway

(.275)(.275) (.248)(.248)

(.145)(.145)

(.031)(.031)

(.019)(.019)

(.157)(.157)

(.070)(.070) (.187)(.187)

(.393 DIA)(.393 DIA)

(.157 DIA)(.157 DIA)

(1/4-40UNS)(1/4-40UNS)

(.519)(.519)

(.275)(.275) (.472)(.472)

6.35 DIA-40UNS6.35 DIA-40UNS

13.2013.20

10.00 DIA10.00 DIA

4.00 DIA4.00 DIA

1.801.80

7.007.00

0.500.50

0.800.80

4.004.00

4.754.75

12.0012.00

7.007.00 6.306.30

3.703.70

(.716)(.716)

18.2018.20

(.283)(.283)

7.207.20

1 1 23EPOXYEPOXY

SP DP

● Single pole-double throw & double pole-double throw models.

● ON-MOM and ON-ON alternate actions .

● 1/4-40 and 15/32-32 threaded bushing options.

● Panel and p.c. mounting models with compact miniature case size.

Note: Cap shown must be

ordered separately.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C52

8000 SERIES - MINI. MOMENTARY OR ALTERNATE ACTION PUSHBUTTON SWITCHES

SINGLE POLE

MODEL NO. CIRCUIT

8432AB ON MOM

8436AB ON ON

DOUBLE POLE

MODEL NO. CIRCUIT

8442AB ON MOM

8446AB ON ON

Actuator position:

Terms. connected: 2-3 1-2

5-6 4-5

SINGLE POLE

MODEL NO. CIRCUIT

8432WCDB ON MOM

8436WCDB ON ON

DOUBLE POLE

MODEL NO. CIRCUIT

8442WCDB ON MOM

8446WCDB ON ON

Actuator position:

Terms. connected: 2-3 1-2

5-6 4-5

Straight p.c. terminals - 1/4" (6.35mm) bushing - silver contacts

Horizontal right angle p.c. terminals - 1/4" (6.35mm) bushing - gold plated brass contacts

Series Terminals Number of poles Electrical functions Terminals

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

(Allowable options are shown under each respective box).

Note: 'NONE' indicates box may be left empty.

Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications.

Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply

selecting from all available options shown and filling in the boxes.

8

3Single pole

4Double pole

2ON - MOM

6ON - ON

ASilver

ADSilver, gold plated

CDBrass, gold plated

Options:

(NONE) No sealing

BEpoxy sealed terminals

KFront panel sealing with

'o'-ring & gasket

Contact materials Actuators Sealing Special options

Example of completely specified

model number: 8432WCDB

4Straight p.c. or right angle terminals

6Solder lug terminals

(NONE) Solder lug

or straight p.c.

WRight angle p.c.

(NONE)

X718 15/32"

(11.9mm) bushing

X934 15/32"

(11.9mm) bushing &

front panel sealing

Caps available separately -

see option drawings.

For 1/4" (6.35mm) bushings

(NONE) Height .248" ( 6.3mm)

9 Height .346" (8.8mm)

For 15/32" (11.9mm) bushings

(NONE) Height .338" (8.6mm)

6Height .275" (7mm)

(NONE)

UL

Keyway

DP

6.30

7.00

12.00

4.75

4.00

0.80

0.50

7.00

4.00 DIA

10.00 DIA

13.20

6.35 DIA-40UNS

(.472)

(.275)

(.519)

(1/4-40UNS)

(.157 DIA)

(.393 DIA)

(.187)

(.157)

(.019)

(.031)

(.248)

(.275)

(.767)

(.157)

(.283)

7.20

19.50

4.00

(.043)

1.10

(.157)

(.187)

(.062 DIA)

4.00

1.60 DIA

4.75

1

23

EPOXY

SP

DP

SP

(.248)(.248)

(.393 DIA)(.393 DIA)

(.157 DIA)(.157 DIA)

(1/4-40UNS)(1/4-40UNS)

(.519)(.519)

6.35 DIA-40UNS6.35 DIA-40UNS

13.2013.20

10.00 DIA10.00 DIA

4.00 DIA4.00 DIA

6.306.30

(.275)(.275)

7.007.00

(.031)(.031)

(.019)(.019)

(.157)(.157)

0.500.50

4.004.00

0.800.80

(.433)(.433) (.283)(.283)

(.338)(.338)(.500)(.500)(.150)(.150)

(.043)(.043) (.015)(.015)

(.145)(.145)

(.472)(.472)

(.338)(.338)

(.500)(.500)

12.7012.70 8.608.60

0.400.40

3.813.81

1.101.10

12.7012.70 8.608.60

7.207.20

11.0011.00

(.472)(.472)

(.145)(.145) 3.703.70

12.0012.00

3.703.70

(.062 DIA)(.062 DIA)

1.60 DIA1.60 DIA

4.00 4.00

(.157)(.157)

3.813.81 12.7012.70

5.085.08

(.150)(.150) (.500)(.500)

(.200)(.200)

(.062 DIA)(.062 DIA)

1.60 DIA1.60 DIA

(.157)(.157)

4.004.00

(.196)(.196)

(.500)(.500)

5.085.08

12.7012.70

3 3 21

EPOXYEPOXY

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C53

8000 SERIES - MINI. MOMENTARY OR ALTERNATE ACTION PUSHBUTTON SWITCHES

SWITCH ACTION

Function 6 Function 2 1/4" (6.35mm) 1/4" (6.35mm)

(ON-ON) (ON-MOM) Standard (With locking ring) with K option

MISCELLANEOUS

PANEL CUT-OUTS

ACTUATOR OPTIONS

(NONE) Standard 9 (NONE) Standard 6

For 1/4" (6.35mm) bushing For 15/32" (11.9mm) bushing

Arrow indicates keyway

SPECIAL OPTIONS

FTin plated terminals (for p.c. terminals only).

X601 Silver plated brass contacts. Contact ratings: 0.2A 250VAC,

0.4A 125VAC or 0.5A 30VDC. Electric life: 20,000 cycles min.

Minimum quantity: 5,000 pieces.

X718 Bushing 15/32" (11.9mm). For all basic models (solder lug,

straight p.c. or right angle p.c.terminals).

Available with actuators 13 & 6. Sealing option K available.

X934 Flatted 15/32" (11.9mm) bushing and front panel sealing with

2 'o'-rings.

X934

X718

SEALING OPTIONS

(NONE) No sealing.

BEpoxy sealed terminals.

KFront panel sealing with'o'-ring and gasket.Protects against

water and dust. Withstands 1 bar pressure when switch

is operated.

KB Combined sealings (above). K

(.559)

(.275)

(.248)

(.157 DIA)

(1/4-40UNS)

6.35 DIA-40UNS

4.00 DIA

14.20

6.30

7.00

14.20

4.00 DIA

6.35 DIA-40UNS

(1/4-40UNS)

(.157 DIA)

(.275)

(.559)

(.346)

8.80

(.472)

(.338)

(.157 DIA)

(15/32-32UNS)

4.00 DIA

11.90 DIA-32UNS

8.60

12.00

11.90 DIA-32UNS

(15/32-32UNS)

(.472)

(.275)

7.00

(.251DIA)

6.40 DIA

1 2 3 1 2 3 1 2 3

6.50 DIA

2.20 DIA

5.20

(.255 DIA)

(.086 DIA)

(.204)

(.255 DIA)

6.50 DIA

1.10

2.70

(.106)

(.043)

1

2

3

(.472) (.338) (.433)

(.157)

(15/32-32UNS)

11.00 12.00 8.60

11.90 DIA-32UNS

4.00 DIA

1.70

12.00 DIA

5.10

9.60

3.50 DIA

12.50 DIA

(.472 DIA)

(.137 DIA)

(.492 DIA)

(.066)

(.200)

(.377)

11.90 DIA-32UNS

(15/32-32UNS)

3

2

1

(.413) (.413) (.492) (.492) (.275) (.275)

(.314 MAX) (.314 MAX)

(.059) (.059)

(.251)

10.50 10.50 7.00 7.00 12.50 12.50

1.50 1.50

8 Maxi 8 Maxi

6.40 DIA

(.200)

(.472 DIA)

5.10

12.00 DIA

2Maxi

1

2

(.417 DIA)

(.090)

(.464 DIA)

(.251 DIA)

(.228)

10.60 DIA

11.80 DIA

5.80

2.30

6.40 DIA

Keyway or flat

15/32" (11.9mm) 15/32" (11.9mm)

with locking ring with K option

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C54

8000 SERIES - MINI. MOMENTARY OR ALTERNATE ACTION PUSHBUTTON SWITCHES

CAPS

Note: replace last '0' in p/n with color code.

U900 U1140 U1720 U480 Standard

U630 U2430 Square U2020 Square U2600 for 6X718 option

Cap colors

1blue

2black

3green

4grey

5yellow

6red

7/1 white

9orange

DRESS NUTS (chrome plated)

U1636 For cap U1140 U825 For cap U630 U840 For cap U480

(.322 DIA)

(.500 DIA)

(1/4-40UNS)

(.322)

(.244)

12.70 DIA

8.20 DIA

6.20

8.20

6.35 DIA-40UNS

(.413 DIA)

(.531 DIA)

(.314)

(.228)

10.50 DIA

13.50 DIA

5.80

8.00

6.35 DIA-40UNS

(1/4-40UNS)

(.157)

(.196)

(.129)

4.00

3.30

5.00 DIA

(.250)

(.314 DIA)

(.118)

3.00

6.35

8.00 DIA

(.118)

(.370)

(.250)

3.00

6.35

9.40 DIA

(.118)

(.393)

(.295)

10.00 DIA

7.50

3.00

(.590 DIA)

(.393)

(.118)

3.00

10.00

15.00 DIA

(.452 SQ)

(.157)

(.196)

4.00

3.00

11.50x11.50

(.236)

(.452 SQ)

(.195)

6.00

5.00

11.50x11.50

(.610 DIA)

(.728 DIA)

18.50 DIA

15.50 DIA

6.35 DIA-40UNS

(1/4-40UNS)

8.00

(.314)

(.236)

6.00

(.511 DIA)

(.236)

(.118)

3.00

6.00

13.00 DIA

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C55

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts: Coin silver for power,UL & CSA models. Gold over nickel over brass for dry

circuit models.

Actuator: Glass filled polyester, color white

Bushing: Nickel plated brass

Strap: Stainless steel

Case: Melamine phenolic, color red

Terminal seal: Epoxy (standard)

Support bracket: Brass or steel, tin plated

Spring mounting bracket: Stainless steel

Bezel & cap: Nylon. Available in black, red & white. Consult factory for other colors.

Hardware: See 'Miscellaneous' section.

LED: Intensity: 2.0 mcd at 10 mA. Forward voltage: 2.0V (3.0V max.). Max. contin-

uous forward current: 15 mA for red, 30 mA for green & 20 mA for yellow.

Red is standard. Yellow & green are optional. Specifications are subject to

change without notice - consult factory.

SPECIFICATIONS

Contact ratings (resistive loads): (Q) power models - coin silver: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7

Amps at 30 VDC.

(B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max.

UL models - coin silver: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75%

power factor). UL file no. E66367. CSA models - coin silver: same ratings as

UL models. CSA file no. LR54592-1.

Initial contact resistance: 20 milliohms max. at 3 VDC, 0.1 Amp.

Insulation resistance: Greater than 200,000 megohms between terminals & case ground.

Dielectric strength: Greater than 1500 VAC for 1 minute between terminals & case ground.

Electrical life (resistive loads): 60,000 cycles min. at full load.

Operating temperature range: -30°C to +85°C

Total travel: .035" (0.9mm) approx.

Actuation force: Single pole: 290 ± 75 grams Double pole: 550 ± 75 grams

ABOUT THIS SERIES

The material in this series is organized in the following sequence:

a. Completely specified switch models b. 'build your own switch' order format c. Miscellaneous

d. Option drawings & information e. Panel cut-outs

AGENCY RECOGNITION UL, & CSA. Marking: Switches ordered with '/UL' added at end of

model no. are supplied with recognition marked. Switches ordered with '/CSA' added at end

of model no. are supplied with recognition marked.

● Dry circuit through power ratings .

● Ultra-rugged construction SPDT & DPDT momentary models with numerous options.

● Panel, panel & p.c. and p.c. mounting models, lighted and unlighted.

Also see economy ratings

N & T in options section.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C56

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

Solder lug terminals - panel mounting

Horizontal right angle p.c. terminals -

p.c. mounting

SINGLE POLE

POWER CKT.

MODEL NO. UL MODEL NO.

810KMZQ 810KMZQ/UL

DOUBLE POLE

POWER CKT.

MODEL NO. UL MODEL NO.

820KMZQ 820KMZQ/UL

SINGLE POLE

DRY CKT.

MODEL NO. UL MODEL NO.

810KSAB 810KSAQ/UL

810KSA-1B 810KSA-1Q/UL

DOUBLE POLE

DRY CKT.

MODEL NO. UL MODEL NO.

820KSAB 820KSAQ/UL

820KSA-1B 820KSA-1Q/UL

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C57

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

Vertical right angle p.c. terminals - p.c. mounting

Straight p.c. terminals with bracket

SINGLE POLE

DRY CKT.

MODEL NO. UL MODEL NO.

810KSVB 810KSVQ/UL

810KSV-1B 810KSV-1Q/UL

810KSV-2B 810KSV-2Q/UL

DOUBLE POLE

DRY CKT.

MODEL NO. UL MODEL NO.

820KSVB 820KSVQ/UL

820KSV-1B 820KSV-1Q/UL

820KSV-2B 820KSV-2 Q/UL

DOUBLE POLE

DRY CKT.

MODEL NO. UL MODEL NO.

820KSV30B 820KSV30Q/UL

820KSV40B 820KSV40Q/UL

SINGLE POLE

DRY CKT.

MODEL NO. UL MODEL NO.

810KSV30B 810KSV30Q/UL

810KSV40B 810KSV40Q/UL

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C58

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

Solder lug terminals - snap-in bezel with outboard LED

Solder lug terminals - snap-in bezel

SINGLE POLE

POWER CKT. DIM.

MODEL NO. UL MODEL NO. A

810K2M1ZQJ6122 810K2M1ZQJ6122/UL .100

810K1M1ZQJ6122 810K1M1ZQJ6122/UL .010

Models listed above have black bezel and cap.

DOUBLE POLE

POWER CKT. DIM.

MODEL NO. UL MODEL NO. A

820K2M1ZQJ6122 820K2M1ZQJ6122/UL .100

820K1M1ZQJ6122 820K1M1ZQJ6122/UL .010

Models listed above have black bezel and cap.

SINGLE POLE

POWER CKT. DIM.

MODEL NO. UL MODEL NO. A

810K2M1ZQJ8122 810K2M1ZQJ8122/UL .100

810K1M1ZQJ8122 810K1M1ZQJ8122/UL .010

Models listed above have black bezel and cap.

DOUBLE POLE

POWER CKT. DIM.

MODEL NO. UL MODEL NO. A

820K2M1ZQJ8122 820K2M1ZQJ8122/UL .100

820K1M1ZQJ8122 820K1M1ZQJ8122/UL .010

Models listed above have black bezel and cap.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C59

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

Straight p.c. terminals - p.c. mounting bezel

DOUBLE POLE

DRY CKT. DIM.

MODEL NO. UL MODEL NO. A

820K2M1CBJ8422 820K2M1CQJ8422/UL .100

820K1M1CBJ8422 820K1M1CQJ8422/UL .010

Models listed above have black bezel and cap.

SINGLE POLE

DRY CKT. DIM.

MODEL NO. UL MODEL NO. A

810K2M1CBJ8422 810K2M1CQJ8422/UL .100

810K1M1CBJ8422 810K1M1CQJ8422/UL .010

Straight p.c. terminals w/bracket - p.c. mounting bezel

DOUBLE POLE

DRY CKT. DIM.

MODEL NO. UL MODEL NO. A

820K2M1V30BJ8422 820K2M1V30QJ8422/UL .100

820K1M1V30BJ8422 820K1M1V30QJ8422/UL .010

Models listed above have black bezel and cap.

SINGLE POLE

DRY CKT. DIM.

MODEL NO. UL MODEL NO. A

810K2M1V30BJ8422 810K2M1V30QJ8422/UL .100

810K1M1V30BJ8422 810K1M1V30QJ8422/UL .010

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C60

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

Horizontal right angle p.c. terminals - p.c. mounting bezel

DOUBLE POLE

DRY CKT. DIM.

MODEL NO. UL MODEL NO. A

820K2M1ABJ8422 820K2M1AQJ8422/UL .100

820K1M1ABJ8422 820K1M1AQJ8422/UL .010

Models listed above have black bezel and cap.

SINGLE POLE

DRY CKT. DIM.

MODEL NO. UL MODEL NO. A

810K2M1ABJ8422 810K2M1AQJ8422/UL .100

810K1M1ABJ8422 810K1M1AQJ8422/UL .010

Vertical right angle p.c. terminals - p.c. mounting bezel

DOUBLE POLE

DRY CKT. DIM.

MODEL NO. UL MODEL NO. A

820K2M1V-1BJ8422 820K2M1V-1QJ8422/UL .100

820K1M1V-1BJ8422 820K1M1V-1QJ8422/UL .010

Models listed above have black bezel and cap.

SINGLE POLE

DRY CKT. DIM.

MODEL NO. UL MODEL NO. A

810K2M1V-1BJ8422 810K2M1V-1QJ8422/UL .100

810K1M1V-1BJ8422 810K1M1V-1QJ8422/UL .010

Poles Option Dim. B Dim. C

SP A .148 .045 max.

SP A-1 .164 .095 max.

DP A .250 .300 max.

DP A-1 .266 .350 max.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C61

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

DOUBLE POLE

POWER CKT. DIM.

MODEL NO. UL MODEL NO. A

820K2M1ZQJ9622 820K2M1ZQJ9622/UL .100

820K1M1ZQJ9622 820K1M1ZQJ9622/UL .010

Models listed above have black bezel and cap.

SINGLE POLE

POWER CKT. DIM.

MODEL NO. UL MODEL NO. A

810K2M1ZQJ9622 810K2M1ZQJ9622/UL .100

810K1M1ZQJ9622 810K1M1ZQJ9622/UL .010

Snap-in bezel for round hole mounting

Self-keying against rotation

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

Allowable options are shown below each respective box with brief description - see option dwgs. & info. following.

Note: 'NONE' indicates box may be left empty.

Additional ordering information: Commonly ordered models are shown above and on prior pages with complete model numbers

and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model num-

ber by simply selecting from all available options shown and filling in the boxes.

KStandard

K1 Short

K2 Medium

Series Actuators Bushings Terminations Contact materials

Options:

Bezel& cap Bezel color Cap color Approvals

(NONE)

J61Snap-in w/LED

J81Snap-in no LED

J84P.C. style

J96Snap-in (round

hole)

Single pole:

810

Double pole:

820

MStandard 1/4" thd'd.

M1 Short 1/4" thd'd.

D1/4" thd'd. w/'D' flat

SNon-threaded

ZSolder lug

CPrinted circuit

WWirewrap

W1 Lg. wirewrap

W3 Sht. wirewrap

XExtra lg. wirewrap

Horiz. right angle p.c.

terminals:

A

A- 1

Vertical right angle

p.c. terminals:

V

V- 1

V- 2

Straight p.c. terminals w/brkt.:

V 3 0 or V 3 1

V 4 0 or V 4 1

V70

V80

V71

V81

BGold

QCoin silver

GGold over

coin silver

NEconomy

gold

TEconomy

silver

(NONE)

2Black

6Red

8White

Consult factory for other colors.

(NONE)

2Black

6Red

8White

(NONE)

/UL

/CSA

Notes:

When bezel is specified and flush cap is desired, specify K1 actuator and M1 bushing.

When bezel is specified and raised cap is desired, specify K2 actuator and M1 bushing.

Epoxy terminal seal is standard on 800 Series.

Example of completely specified

model number:

820K1M1ZQJ8126/UL/CSA

Although most combinations of options are available, some may

result in incompatibilities. Consult factory if there is any question.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

C62

SWITCH BODY

SIZES WITH

TERMINAL

LOCATION

DIMENSIONS

SIDE VIEW SIDE VIEW FRONT VIEW

SINGLE POLE DOUBLE POLE SINGLE AND

DOUBLE POLE

MISCELLANEOUS

TYPICAL

SWITCH

CROSS

SECTION

COMM NO NC

HARDWARE SUPPLIED

(See Hardware section of catalog)

Switches with M option bushings are supplied with (2) A112 Hex Nuts,

(1) A115 Lockwasher and (1) A107 Anti-rotate Ring.

Switches with D option bushings are supplied with (2) A112 Hex Nuts

and (1) A115 Lockwasher.

Switches with M1 option bushings are supplied with (1) A112 Hex Nut

and (1) A115 Lockwasher.

Note: Switches with non-threaded bushings or bezels supplied without hard-

ware.

BUSHING OPTIONS

M & M1 D S

NOTE:

BUSHING M AND

ACTUATOR K

ARE STANDARD.

THREADED THREADED NON-THREADED

ACTUATOR/BUSHING OPTIONS

BUSHING DIM. DIMENSION A

OPTION B ACTUATOR OPTION

KK1K2

M or D .250 .230 .069 .168

S.250 .230 .069 .168

M1 .154 .322 .165 .264

All bushings have 1/4-40 UNS-2A thread except

S which is non-threaded.

Switch caps for switches without bezels also available -

see Hardware section of catalog.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C63

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

TERMINATION OPTIONS

A A-1

V30, V40, V70, V80, V31, V41,

V71 & V81

FRONT VIEW

SINGLE POLE

SINGLE POLE HORIZONTAL P.C. MOUNTING SINGLE POLE HORIZONTAL P.C. MOUNTING

A A-1

DOUBLE POLE HORIZONTAL P.C. MOUNTING DOUBLE POLE HORIZONTAL P.C. MOUNTING

V, V-1 & V-2

VERTICAL P.C. MOUNTING

FRONT VIEW

DOUBLE POLE

SIDE VIEW - SINGLE & DOUBLE POLE

PANEL LAYOUT

V70, V71,

V80 & V81

V31, V41, V71 & V81 ARE THE SAME AS

V30, V40, V70 & V80 RESPECTIVELY,

EXCEPT WITH CRIMPED LEG DESIGN

FOR P.C. BOARD RETENTION, AS SHOWN

TO RIGHT.

Option Dim. A

V70-V71 .630

V80-V81 .953

Option Dim. A Dim. B

V.550 .150

V-1 .500 .150

V-2 .500 .100

Option Dim. A Dim. B

V30-V31 .527 .024

V40-V41 .647 .048

PANEL LAYOUT

V30, V31, V40 & V41

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C64

800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES

TERMINATION OPTIONS (CONT'D.)

SOLDER LUG PRINTED CIRCUIT WIREWRAP LONG WIREWRAP SHORT WIREWRAP EXTRA LG. WIREWRAP

Z C W W1 W3 X

CONTACT MATERIAL OPTIONS

B

Q

G

N

T

Dry circuit - gold over nickel over brass.

RATING: 0.4 Volt-Amps (VA) max. at 20 V max.

ELECTRIC LIFE: 60,000 cycles minimum. MECHANICAL LIFE: 500,000 cycles minimum.

Power circuit - coin silver.

RATING: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC (resistive loads).

ELECTRIC LIFE: 60,000 cycles minimum at full load.

Dry circuit or power circuit - gold over nickel over coin silver.

RATINGS & ELECTRIC LIFE: Same as B & Q above - i.e. - can be used in either dry circuit or power circuit, however once used in power circuit,

switch cannot be re-used in dry circuit. This option satisfies those customers who have both dry circuit and power circuit requirements, but prefer

to inventory only one switch for both.

Dry circuit - gold over nickel over brass. Note- less gold than B option.

RATING: 0.4 Volt-Amps (VA) max. at 20 V max.

ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.

Power circuit - Silver plate over brass.

RATING: 1 Amp at 125 VAC or 0.5 Amps at 250 VAC (resistive loads).

ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.

Solder dipped terminals and custom

contact plating available - contact factory.

UL & CSA OPTIONS

UL

CSA

For power circuits - coin silver

RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor).

Underwriter Laboratories file no. E66367. Note - applicable only to terminations with coin silver contacts

(Q or G options).

For power circuits - coin silver

RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Canadian Standards Association file no. LR54592-1. Note - applicable

only to terminations with coin silver contacts (Q or G options) as CSA recognizes switches for power applications only.

PANEL CUT-OUTS

Cut-outs that accept all 1/4-40 threaded bushings:

Without keying With A107 anti-rotate With A158 anti-rotate With D bushing With slotted keyway Accepts all 1/4" non-

ring ring bushings threaded bushings

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C65

PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts: Coin silver for power,UL & CSA models. Gold over nickel over brass for dry

circuit models.

Actuator: Glass filled polyester, color white

Bushing: Nickel plated brass

Strap: Stainless steel

Case: Melamine phenolic, color red

Terminal seal: Epoxy (optional)

Support bracket: Brass or steel, tin plated

Spring mounting bracket: Stainless steel

Bezel & cap: Nylon. Available in black, red or white. Consult factory for other colors.

Hardware: See 'Miscellaneous' section.

LED: Intensity: 2.0 mcd at 10 mA. Forward voltage: 2.0V (3.0V max.). Max. contin-

uous forward current: 15 mA for red, 30 mA for green & 20 mA for yellow.

Red is standard. Yellow & green are optional. Specifications are subject to

change without notice - consult factory.

SPECIFICATIONS

Contact ratings (resistive loads): (Q) power models - coin silver: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7

Amps at 30 VDC.

(B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max.

UL models - coin silver: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75%

power factor). UL file no. E66367. CSA models - coin silver: same ratings as

UL models. CSA file no. LR54592-1.

Initial contact resistance: 5 milliohms max. at 3 VDC, 0.1 Amp.

Insulation resistance: Greater than 200,000 megohms between terminals & case ground.

Dielectric strength: Greater than 2000 VAC for 1 minute between terminals & case ground.

Electrical life (resistive loads): 100,000 cycles min. at full load.

Operating temperature range: -30°C to +85°C

Total travel & operating force: .065" (1.6mm) & 19 oz. (approximate values ).

ABOUT THIS SERIES

The material in this series is organized in the following sequence:

a. Completely specified switch models b. 'build your own switch' order format c. Miscellaneous

d. Option drawings & information e. Panel cut-outs & miscellaneous

AGENCY RECOGNITION UL, & CSA. Marking: Switches ordered with '/UL' added at end of model no. are

supplied with recognition marked. Switches ordered with '/CSA' added at end of

model no. are supplied with recognition marked.

● Dry circuit through power ratings .

● Rugged construction SPDT momentary models with numerous options.

● Panel, panel & p.c. and p.c. mounting models, lighted and unlighted.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C66

PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

Solder lug terminals - panel mounting

Horizontal right angle p.c. terminals - p.c. mounting

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y1ZQ PB1-3P2Y1ZB

P.C. or wirewrap terminals - panel or p.c. mounting

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y1CQ PB1-3P2Y1CB

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y2A-1Q PB1-3P2Y2A-1B

Vertical right angle p.c. terminals - p.c. mounting

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y2V-1Q PB1-3P2Y2V-1B

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C67

PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

Straight p.c. terminals with bracket - p.c. mounting

Solder lug terminals - snap-in bezel

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y1ZQJ6168 PB1-3P2Y1ZBJ6168

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y1ZQJ8182 PB1-3P2Y1ZBJ8182

POWER CKT. DRY CKT.

MODEL NO MODEL NO.

PB1-3P2Y2V30Q PB1-3P2Y2V30B

Solder lug terminals - snap-in bezel with LED

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C68

PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

Straight p.c. terminals - p.c. mounting bezel

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y1CQJ8488 PB1-3P2Y1CBJ8488

Straight p.c. terminals with bracket - p.c. mounting bezel

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y1V30QJ8488 PB1-3P2Y1V30BJ8488

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y1A-1QJ8488 PB1-3P2Y1A-1BJ8488

C69

PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

Vertical right angle p.c. terminals - p.c. mounting bezel

Horizontal right angle p.c. terminals - p.c. mounting bezel

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y1V-1QJ8488 PB1-3P2Y1V-1BJ8488

Option Dim. A Dim. B

A .148 .045 max.

A-1 .164 .095 max.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C70

PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

Solder lug terminals - snap-in bezel for round hole mounting

Self-keying against rotation

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

Allowable options are shown below each respective box with brief description - see option dwgs. & info. following.

Note: 'NONE' indicates box may be left empty.

Additional ordering information: Commonly ordered models are shown above and on prior pages with complete model numbers

and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model num-

ber by simply selecting from all available options shown and filling in the boxes.

PLong

P2Short

(standard)

Series Actuators Bushings Terminations Contact materials

Options:

Bezel& cap Bezel color cap color Approvals

(NONE)

J61Snap-in w/LED

J81Snap-in no LED

J84P.C. style

J96Snap-in (round

hole)

Y1/4" thd'd.

Y1Short 1/4" thd'd.

(standard)

D1/4" thd'd. w/'D' flat

Y2Non-threaded

ZSolder lug

CPrinted circuit

WWirewrap

W1 Lg. wirewrap

W3 Sht. wirewrap

XExtra lg. wirewrap

Horiz. right angle p.c.

terminals:

A

A- 1

Vertical right angle

p.c. terminals:

V

V- 1

V- 2

Straight p.c. terminals w/brkt.:

V 3 0 or V 4 1

V 4 0 or V 4 1

V70

V80

V71

V81

BGold

QCoin silver

GGold over

coin silver

NEconomy

gold

TEconomy

silver

(NONE)

2Black

6Red

8White

Consult factory for other colors.

(NONE)

2Black

6Red

8White

(NONE)

/UL

/CSA

Note:

When bezel is specified,

specify P2 actuator and

Y1 bushing.

Example of completely specified

model number:

PB1-3P2Y1ZQJ9622/UL/CSA

PB1- 3

POWER CKT. DRY CKT.

MODEL NO. MODEL NO.

PB1-3P2Y1ZQJ9688 PB1-3P2Y1ZBJ9688

Although most combinations of options are available, some may

result in incompatibilities. Consult factory if there is any question.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

C71

MISCELLANEOUS

TYPICAL

SWITCH

CROSS

SECTION

HARDWARE SUPPLIED

(See Hardware section of catalog)

Switches with Y option bushings are supplied with (2) A112 Hex Nuts,

(1) A115 Lockwasher and (1) A107 Anti-rotate Ring.

Switches with D option bushings are supplied with (2) A112 Hex Nuts and

(1) A115 Lockwasher.

Switches with Y1 option bushings are supplied with (1) A112 Hex Nut and

(1) A115 Lockwasher.

Note: Switches with non-threaded bushings or bezels supplied without hardware.

ACTUATOR/BUSHING OPTIONS

PY P2Y1 P2Y2

Drawings reflect

allowable

actuator/bushing

combinations.

Note for drawings P2Y1

& P2Y2:

Asterisk indicates .290

flats are supplied with

options A, V, V30, V40,

V70, V71, V80 & V81.

For other options, .320

Dia. with no flats may be

supplied THREADED THREADED NON-THREADED

PD

THREADED

TERMINATION OPTIONS

A A-1

HORIZONTAL P.C. MOUNTING HORIZONTAL P.C. MOUNTING

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C72

PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

TERMINATION OPTIONS (CONT'D.)

V30, V40, V70, V80, V31, V41,

V71 & V81

PANEL LAYOUT

V70, V71,

V80 & V81

V31, V41, V71 & V81 ARE THE SAME AS

V30, V40, V70 & V80 RESPECTIVELY,

EXCEPT WITH CRIMPED LEG DESIGN

FOR P.C. BOARD RETENTION, AS SHOWN

TO RIGHT.

V, V-1 & V-2

Option Dim. A Dim. B

V.550 .150

V-1 .500 .150

V-2 .500 .100

VERTICAL P.C. MOUNTING

Option Dim. A Dim. B

V30-V31 .527 .024

V40-V41 .647 .048

Option Dim. A

V70-V71 .630

V80-V81 .953

SOLDER LUG PRINTED CIRCUIT WIREWRAP LONG WIREWRAP SHORT WIREWRAP EXTRA LG. WIREWRAP

Z C W W1 W3 X

PANEL LAYOUT

V30, V31, V40 & V41

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C73

PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES

CONTACT MATERIAL OPTIONS

B

Q

G

N

T

Dry circuit - gold over nickel over brass.

RATING: 0.4 Volt-Amps (VA) max. at 20 V max.

ELECTRIC LIFE: 60,000 cycles minimum. MECHANICAL LIFE: 500,000 cycles minimum.

Power circuit - coin silver.

RATING: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC (resistive loads).

ELECTRIC LIFE: 60,000 cycles minimum at full load.

Dry circuit or power circuit - gold over nickel over coin silver.

RATINGS & ELECTRIC LIFE: Same as B & Q above - i.e. - can be used in either dry circuit or power circuit, however once used in power circuit,

switch cannot be re-used in dry circuit. This option satisfies those customers who have both dry circuit and power circuit requirements, but prefer

to inventory only one switch for both.

Dry circuit - gold over nickel over brass. Note- less gold than B option.

RATING: 0.4 Volt-Amps (VA) max. at 20 V max.

ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.

Power circuit - Silver plate over brass.

RATING: 1 Amp at 125 VAC or 0.5 Amps at 250 VAC (resistive loads).

ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute.

Solder dipped terminals and custom

contact plating available - contact factory.

UL & CSA OPTIONS

UL

CSA

For power circuits - coin silver

RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor).

Underwriter Laboratories file no. E66367. Note - applicable only to terminations with coin silver contacts

(Q or G options).

For power circuits - coin silver

RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor).

Canadian Standards Association file no. LR54592-1. Note - applicable only to terminations with coin silver contacts

(Q or G options) as CSA recognizes switches for power applications only.

PANEL CUT-OUTS

Cut-outs that accept all 1/4-40 threaded bushings:

Without keying With A107 anti-rotate With A158 anti-rotate With D bushing With slotted keyway Accepts all 1/4" non-

ring ring bushings threaded bushings

EPOXY SEALING OPTION REVERSE ACTION OPTION

E /R

Space between terminals

and case hole is completely

epoxy sealed to prevent

flux and contaminant entry.

To reverse the NO and NC

terminals, add /R to the switch

model number.

MISCELLANEOUS

QUICK-CONNECT RECEPTACLES that are compatible with solder lug or p.c. terminals are commercially available. Consult factory.

FRONT PANEL SEAL: Silicone rubber boots for front panel sealing of the switch against high pressure water or other contaminants are available. See

Waterproof Switch Sealing Boots section in catalog.

SWITCH CAPS for switches without bezels also available - see Hardware section of catalog

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C74

13000 SERIES - QUICK-BREAK PUSHBUTTON SWITCHES

FEATURES

SPECIFICATIONS

Contact ratings (resistive loads): Silver & gold plated silver; 2 Amps at 250 VAC, 4 Amps at 125 VAC or 4 Amps

at 30 VDC. (300 mA 30 VDC max. to prevent damage to gold plating.)

Gold plated brass; 100 mA at 30 V max.

Initial contact resistance: 10 milliohms maximum

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 1000 V rms min. - between terminals

2000 V rms min. - between poles and terminals and frame

Electrical life: Silver: 50,000 cycles min. Gold plated silver: 20,000 cycles min.

Gold plated brass: 50,000 cycles min.

Low level or mechanical life: 150,000 cycles min.

Total Travel: .078" (2mm)

Operating temperature range: -40°C to +85°C

ABOUT THIS SERIES

The material in this series is organized in the following sequence:

a. Completely specified switch models

b. 'build your own switch' order format

c. Option drawings

MATERIALS

Contacts : Silver, gold plated silver or gold plated brass

Actuator: Chrome plated brass

Bushing: Nickel plated brass

Housing: Nickel plated brass

Case: Diallyl phthalate (DAP)

Terminal seal: Epoxy

Hardware: 1/4" threaded bushing models supplied with 2 Hex Nuts .314" (8mm) across

flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog.

AGENCY RECOGNITION

UL, CECC, LNZ, GAM T1, QPL (Europe), MUAHAG

Availability: Consult factory for details of recognized models.

Marking:To order switches marked CECC, complete the appropriate box of the ordering

format. Other listings do not appear on the switches.

● Quick break momentary action.

● SPDT & DPDT models with 1/4" threaded bushing (also see optional 15/32" bushing).

● Models for panel and p.c. mounting.

● Bright chrome or matte black finish on bushing, actuator & hardware.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C75

13000 SERIES - QUICK-BREAK PUSHBUTTON SWITCHES

Solder lug terminals - silver contacts

Straight p.c. terminals - silver contacts

Horizontal right angle p.c. terminals - silver contacts

SINGLE POLE

MODEL NO. CIRCUIT

13435A ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

13445A ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

SINGLE POLE

MODEL NO. CIRCUIT

13235A ON MOM

DOUBLE POLE

MODEL NO. CIRCUIT

13245A ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

SINGLE POLE

MODEL NO. CIRCUIT

13435WA ON MOM

Handle position:

Terms. connected: 1-3 1-2

With short actuator

MODEL NO. CIRCUIT

13445A4X768 ON MOM

With long actuator

MODEL NO. CIRCUIT

13445A9X768 ON MOM

Handle position:

Terms. connected: 1-3 1-2

4-6 4-5

Contact and finish options available.

X768 - Sealed double pole with 15/32" (11.9mm) flatted bushing

6.00

14.00

4.00 DIA

8.00

(.314)

(.551)

(.236)

(.157 DIA)

6.30

(.248)

9.50

(.374)

EPOXY

(.236)

(.157)

(.039)

(.019)

(.157)

(.236)

(.157)

(.062 DIA)

1.00

4.00

0.50

6.00

1.6 DIA

4.00

(.027)

(.527)

13.40

0.70

1 2 3

(1/4-40UNS)

6.35 DIA-40UNS

(.157 DIA)

(.019)

(.157)

(.232)

(.236)

(.527)

(.102)

(.039)

(.364)

(.015)

(.173)

0.40

9.27

2.60

1.00

5.90

6.00

13.40

4.40

4.00

4.00 DIA

0.50

6.35 DIA-40UNS

(1/4-40UNS)

(.027)

0.70

1

EPOXY

4.00

(.157)

(.314)

8.00

4.00

1.60 DIA

(.062 DIA)

(.157)

5.08

(.200)

9.27

(.364)

2 3

(.196)

(.157 DIA)

(.019)

(.236)

(.248)

(.551)

(.236) (.098)

EPOXY

(.314)

2.50

8.00

4.00 DIA

0.50

6.00

14.00

6.30

6.00

5.00

(.027)

(.527)

13.40

0.70

1 2 3

(.157)

4.00

6.35 DIA-40UNS

(1/4-40UNS)

(.472 DIA)

12.00 DIA

(.200)

5.10

(.314 DIA)

11.9 DIA 32UNS

(.157)

(.236)

(.314 DIA)

(.354)

(.295)

(.019)

(.157)

(.059)

(.196)

4.00

5.00

9.00

7.50

1.50

6.00

8.00 DIA

4.00

0.50

8.00 DIA

EPOXY

(.468-32UNS)

(.559)

14.20

(.098)

2.50

213

Keyway

SP

DP

SP

DP

Keyway

Flat

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

Allowable options are shown below each respective box.

Note 'NONE' indicates box may be left empty.

Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and spec-

ifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by

simply selecting from all available options shown and filling in the boxes.

1

3Single pole

4Double pole

(NONE) Solder lugs

or straight p.c.

WHorizontal right

angle p.c.

13000 SERIES - QUICK-BREAK PUSHBUTTON SWITCHES

Series Terminals Number Electrical Terminals Contact

& bushings of poles functions materials

5ON - MOM ASilver

AD2Gold plated

silver (2 microns)

CD Gold plated

brass

Options:

Actuators Finish Sealing Special options Approvals/listings

(NONE) Bright

chrome finish

GMatte black finish

on bushing, act-

uator & hardware.

(NONE) Epoxy sealed

terminals std'd.

KFront panel

sealing with

o-ring & gasket.

(NONE)

CECC

(consult factory for details

of approved models).

Example of completely specified

model number:

13235AGKFCECC

(NONE) Standard for

1/4" bushing

4.157" (4mm) long

for 15/32" (11.9mm)

bushing (X768)

9.354" (9mm) long

for 15/32" (11.9mm)

bushing (X758)

C76

(NONE)

FTin plated term-

inals (p.c. only)

X7 68 15/32"

(11.9mm) bushing

+ front panel seal-

ing (Double pole

only).

3

PANEL CUT-OUTS TERMINALS

SWITCH ACTION

Arrow indicates keyway

2Straight p.c.

terminals, 1/4"

(6.35mm) bushing

4Solder lugs, 1/4" (6.35mm) or 15/32"

(11.9mm) bushing. Right angle term-

inals,1/4" (6.35mm) bushing

Caps available separately -

see option drawings.

Standard with K sealing option with X640 sealing option Solder Lug Straight p.c.

(see Special Options)

(.098)

(.047)

(.066)

(.196)

1.70

5.00

1.20

2.50

(.374)

(.039)

9.50

1.00

1 2 3

6.50 DIA

2.20 DIA

5.20

(.255 DIA)

(.086 DIA)

(.204)

(.255 DIA)

6.50 DIA

1.10

2.70

(.106)

(.043)

(.106)

2.70

6.50 DIA

(.255 DIA)

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

FTin plated terminals (for p.c. term-

inals only).

KFront panel sealing with 'o'-ring (1) &

sealing gasket (2). Protects switch

against water & dust. Panel seal

withstands 1 bar pressure even when

switch is operated.

X640 Front panel sealing with 3 'o'-rings (1)

& flatted bushing. Protects switch

against water & dust. Panel seal

withstands 1 bar pressure even when

switch is operated. (Available with1/4"

(6.35mm) bushing only).

C77

13000 SERIES - QUICK-BREAK PUSHBUTTON SWITCHES

CAPS

Note: replace last '0' in p/n with color code.

U900 U1140 U1720 U480 Standard

U630 U2020 Square U2430 Square

Colors

1blue

2black

3green

4grey

5yellow

6red

7ivory

7/1 white

9orange

DRESS NUTS Chrome plated For models with 1/4" (6.35mm) threaded bushings only.

SPECIAL & SEALING OPTIONS

U1636 For cap U1140 U840 For cap U480 U825 For cap U630

KX640

(.417 DIA)

(.464 DIA)

(.228 DIA)

(.251 DIA) (.090)

10.60 DIA

11.80 DIA

5.80 DIA

2.30

6.40 DIA

1

2

(.078 MAX)

2.00 Maxi

1

(.157 MAX)

4.00 Maxi

(.157)

(.196)

(.129)

4.00

3.30

5.00 DIA

(.250)

(.314 DIA)

(.118)

3.00

6.35

8.00 DIA

(.590 DIA)

(.393)

(.118)

3.00

10.00

15.00 DIA

(.452 SQ)

(.157)

(.196)

4.00

3.00

11.50x11.50

(.236)

(.452 SQ)

(.195)

6.00

5.00

11.50x11.50

(.118)

(.370)

(.250)

3.00

6.35

9.40 DIA

(.118)

(.393)

(.295)

10.00 DIA

7.50

3.00

(.413 DIA)

(.531 DIA)

(.314)

(.228)

10.50 DIA

13.50 DIA

5.80

8.00

6.35 DIA-40UNS

(1/4-40UNS)

(.322 DIA)

(.500 DIA)

(1/4-40UNS)

(.322)

(.244)

12.70 DIA

8.20 DIA

6.20

8.20

6.35 DIA-40UNS

(.610 DIA)

(.728 DIA)

18.50 DIA

15.50 DIA

6.35 DIA-40UNS

(1/4-40UNS)

8.00

(.314)

(.236)

6.00

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C78

13000 SERIES - PUSH/PULL PUSHBUTTON SWITCHES

FEATURES

SPECIFICATIONS

Contact ratings (resistive loads): 4 Amps at 24 VDC

Initial contact resistance: 10 milliohms maximum

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 1000 V rms min. - between terminals

2000 V rms min. - between poles and terminals and frame

Electrical life: 10,000 cycles min.

Total travel: .078" (2mm)

Operating force: Push; 4.5±1.1 lbs. (20±5N) Pull; 4.7±1.4 lbs. (21±6N)

Shock: 50g per IEC 68-2-27

Vibration: 10-500 Hz - 10g per IEC 68-2-6

Moisture resistance: 56 days per IEC 68-2-3

Operating temperature range: -40°C to +85°C

MATERIALS

Contacts : Gold plated silver (2 microns gold)

Actuator dome: Red anodized aluminum

Actuator, bushing & nut: Black chrome plated brass

Terminal seal: Epoxy

Hardware: One 15mm Hex Nut, .708" (18mm) across flats supplied

AGENCY RECOGNITION

CECC, LNZ, GAM T1, QPL (Europe), MUAHAG

Availability: Consult factory for details of recognized models.

● Unique ergonomic actuator .976" (24.8mm) diameter.

● High mechanical strength with double shell case option.

● O-ring sealed around actuator and at front panel interface, and epoxy sealed terminals.

● Requires minimal back-of-panel space.

DOUBLE POLE

With double shell case

13440AD2G-25X1156+U4546

Without double shell case

13440AD2G-25X822+U4546

New!

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C79

13000X778 SERIES - HIGH PERFORMANCE PUSHBUTTON SWITCHES

FEATURES

SPECIFICATIONS

Contact ratings (resistive loads): Silver & gold plated silver; 2 Amps at 250 VAC, 4 Amps at 125 VAC or 4 Amps

at 28 VDC. (300 mA 30 VDC max. to prevent damage to gold plating.)

Minimum load - 10 mA at 50 mV, 10µA at 5 VDC

Initial contact resistance: 10 milliohms maximum

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 1000 V rms min. - between terminals

2000 V rms min. - between poles and between terminals and frame

Electrical life: At 2A 250VAC or 4A 28VDC - 10,000 cycles.

At low level (50mV at 10mA) - 20,000 cycles

Total Travel: .078" (2mm)

Operating temperature range: -40°C to +85°C

Environmental: Shock: 50g - 11ms (IEC 68-2-27). Vibration: 10-500 Hx - 10g (IEC68-2-6)

Salt spray: 96 hrs. (IEC68-2-11).Humidity: 56 days, 93% R.H.,40°C (IEC68-2-3)

ABOUT THIS SERIES

The material in this series is organized in the following sequence:

a. Completely specified switch models

b. 'build your own switch' order format

c. Miscellaneous

AGENCY RECOGNITION

CECC, GAM, QPL (Europe), MUAHAG & DAT (French defense military). Marking: Many models have full

CECC recognition and are marked CECC. Consult factory for list of recognized models.

● Designed for high reliability environments.

● Double shell case for high mechanical strength & high electrical insulation.

● Quick break momentary action DPDT models with 15/32" (11.9mm) threaded bushing.

● Panel sealed to IP67 and fully sealed switch body.

● Highly reliable for low level or power applications.

● Matte black finish on body, bushing, actuator and hardware.

MATERIALS

Contacts : Silver inlay - gold plated over nickel barrier

Actuator: Black chrome plated brass

Bushing: Black chrome plated brass

Case: Diallyl phthalate (DAP) with PBT external shell, epoxy sealed

Hardware: Supplied with 1 Hex Nut with black finish p/n U41. See drawing at end

of section.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C80

13000X778 SERIES - HIGH PERFORMANCE PUSHBUTTON SWITCHES

Double pole - solder lug terminals - .157" (4mm) actuator

Double pole - solder lug terminals - .354" (9mm) actuator

Double pole - straight p.c. terminals - .157" (4mm) actuator

MODEL NO. CIRCUIT

134454X778 ON MOM

Handle position:

Double pole - straight p.c. terminals - .354" (9mm) actuator

MODEL NO. CIRCUIT

134459X778 ON MOM

Handle position:

MODEL NO. CIRCUIT

132454X778 ON MOM

Handle position:

MODEL NO. CIRCUIT

132459X778 ON MOM

Handle position:

4.00

(.157)

8.00 DIA

(.314 DIA)

(.295)

(.594) (.161)

(.019)

(.629)

(.236)

(.098)

(.196 Max)

(15/32-32UNS)

EPOXY

(.157)

5 Maxi 15.10 4.10

7.50

16.00

11.90 DIA-32UNS

4.00

0.50

16.00

2.50

6.00

(.059)

1.50

(.295)(.295)

(.196 Max)(.196 Max)

5 Maxi5 Maxi

7.507.50

1.501.50

(.059)(.059)

8.608.60

4.004.00

1.60 DIA1.60 DIA

6.00

1.00

(.062 DIA)(.062 DIA)

(.157)(.157)

(.236)

(.039)

(.338)(.338)

16.00

4.00

11.90 DIA-32UNS11.90 DIA-32UNS

16.0016.00

15.1015.10

(.157)

EPOXYEPOXY

(15/32-32UNS)(15/32-32UNS)

(.629)(.629)

(.629)

(.594)(.594)

(.314 DIA)

8.00 DIA

(.157)(.157)

4.004.00

(.019)

0.50

(.295)

(.196 Max)

5 Maxi

7.50

9.00

(.354)

8.00 DIA

(.314 DIA)

(.594)

(.629)

(15/32-32UNS)

EPOXY

(.157)

15.10

16.00

11.90 DIA-32UNS

4.00

16.00

(.338)

(.039)

(.236)

(.157)

(.062 DIA)

1.00

6.00

1.60 DIA

4.00

8.60

(.059)

1.50

(.019)

0.50

(.295)

(.196 Max)

5 Maxi

7.50

1.50

(.059)

6.00

2.50

16.00

0.50

4.00

11.90 DIA-32UNS

16.00

4.10

15.10

(.157)

EPOXY

(15/32-32UNS)

(.098)

(.236)

(.629)

(.019)

(.161)

(.594)

(.314 DIA)

8.00 DIA

(.354)

9.00

Flat

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

Model Structure:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number.

Allowable options are shown below each respective box.

Note 'NONE' indicates box may be left empty.

Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and spec-

ifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by

simply selecting from all available options shown and filling in the boxes.

1

4Double pole

13000X778 SERIES - HIGH PERFORMANCE PUSHBUTTON SWITCHES

Series Terminals Number Electrical Actuator Special

& bushing of poles function options

5ON - MOM

Options:

Approvals/listings

(NONE)

CECC (consult factory for details of approved models).

Example of completely specified

model number:

132454X778CECC

4.157" (4mm) long

9.354" (9mm) long

C81

High performance

fully sealed matte

black switch

3

POSITIONS AND CONNECTIONS SWITCH ACTION TERMINALS

SEALING PANEL CUT-OUT HARDWARE

2Straight p.c. term-

inals, 15/32" (11.9mm)

threaded bushing

4Solder lug terminals,

15/32" (11.9mm)

threaded bushing.

X7 7 8

Button position Terminal identification

Arrow indicates flat

I II

Connections

ON MOM

A 1-2 A 1-3

B 1-2 B 1-3

Arrow indicates flat

Solder lug Straight p.c.

Standard on all models:

3 'o'-rings (1) seal front panel and withstand 1

bar pressure, even when switch is operated.

Epoxy sealed terminals.

Splash-proof case.

U41 matte black Hex Nut

Panel thickness:

.196" (5mm) max.

1

4.00 Maxi

(.157 MAX)

1

3

22

3

1

A

B

1 3 2

(.098)

(.047)

(.066)

1.70

1.20

2.50

(.161)

4.10

(.039)

1.00

(.338)

8.60

(.472 DIA)

12.00 DIA

(.200)

5.10

2.30

14.00

(15/32-32UNS)

11.9 DIA-32UNS

(.090)

(.551)

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C82

1200 SERIES - MOMENTARY PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts: Silver

Actuator: Polyamide

Case: Polyamide

Bushing: Nickel plated brass

Hardware: Supplied with 1 Hex Nut p/n U166 & 1 Knurled Nut p/n U411. See hardware

section of catalog.

● Single pole panel mounting models.

● NC & NO electrical functions with double break.

● Solder lug, screw, screw with clamp and right angle screw with clamp terminals.

● 4 optional actuator colors.

SPECIFICATIONS

Contact ratings (resistive loads): 4 Amps at 250 VAC, 8 Amps at 125 VAC or 4 Amps at 24 VDC

Initial contact resistance: 10 milliohms max. at 1A 2VDC

Insulation resistance: 1000 megohms minimum at 500 VDC

Dielectric strength: 2000 V rms min. between terminals. 3000 V rms between terminals & frame

Electrical life: 10,000 cycles at full load

Operating temperature range: -20°C to +55°C

Total travel: NO: .177" (4.5mm) ± .011" (0.3mm) NC: .137" (3.5mm) ± .011" (0.3mm)

AGENCY RECOGNITION

Model no's. with 'UU' are UL & CSA recognized.

Models 1233X209 & 1233X209L are VDE recognized.

Marking: Switches are supplied with recognitions marked.

Solder lug/quick-connect terminals

1212A2 Normally Closed

1213A2UU Normally Open

The '2' following the 'A' in model no. indicates

black actuator. Substitute '6' for red or '7/1' for

white, if desired.

(.362)(.362) (.472)(.472) (.413)(.413)

(.25x0.031)(.25x0.031)

13.2013.20

(.551)(.551)

(.669)(.669)

(.472 DIAx0.75 IS)(.472 DIAx0.75 IS)

9.209.20 12.0012.00 10.5010.50

14.0014.00

6.35x0.806.35x0.80

(.519)(.519)

17.0017.00

12.00 DIAx0.75 SI12.00 DIAx0.75 SI

7.507.50

(.295)(.295)

(.039)(.039)

1.001.00

8.00 DIA8.00 DIA

(.315 DIA)(.315 DIA)

Keyway

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C83

1200 SERIES - MOMENTARY PUSHBUTTON SWITCHES

Straight screw terminals and clamp

Right angle screw terminals and clamp

Screw terminals

1222A2 Normally Closed

1223A2UU Normally Open

The '2' following the 'A' in model no. indicates

black actuator. Substitute '6' for red or '7/1' for

white, if desired.

1202A2 Normally Closed

1203A2UU Normally Open

The '2' following the 'A' in model no. indicates

black actuator. Substitute '6' for red or '7/1' for

white, if desired.

12037A2UU Normally Open

The '2' following the 'A' in model no. indicates

black actuator. Substitute '6' for red or '7/1' for

white, if desired.

1233A2X209UU Normally Open

The '2' following the 'A' in model no. indicates

black actuator. Substitute '6' for red or '7/1' for

white, if desired.

X209 - UL, CSA, VDE, SEMCO & NF-USE approved - solder lug/quick connect terminals

( Note- U187 ground connector ring required if panel is not

metallic or not connected to ground.Order separately).

12.00 DIAx0.75 SI12.00 DIAx0.75 SI

(.472 DIAx0.75 IS)(.472 DIAx0.75 IS)

7.00

(.275)

6.35x0.806.35x0.80

(.25x.031)(.25x.031)

10.5012.00

(.413)(.472)

8.00 DIA8.00 DIA

(.315 DIA)(.315 DIA)

14.0014.00

(.551)(.551)

7.50

(.295)

(.826)(.826)

9090

21.0021.00

1.00

(.039)

10.50

12.00

9.20

(.413)

(.472)

(.362)

8.00 DIA

(.315 DIA)

6.35x0.80

14.00

(.551)

(.25x0.031)

(.519)

13.20

17.00

(.669)

12.00 DIAx0.75 SI

(.472 DIAx0.75 IS)

(.295)

7.50

(.039)

1.00

10.5010.5012.0012.00

(.413)(.413)(.472)(.472)

(.315)(.315)

8.008.00

14.0014.00

(.551)(.551)

17.0017.00

(.519)(.519) (.669)(.669)

13.2013.20

12.00 DIAx0.75 SI 12.00 DIAx0.75 SI

(.472 DIAx0.75 IS)(.472 DIAx0.75 IS)

(.295)(.295)

7.507.50

(.315 DIA)(.315 DIA)

8.00 DIA8.00 DIA

1.001.00

(.039)(.039)

(.472 DIAx0.75 IS)

12.00 DIAx0.75 SI

(.551)

14.00

(.315 DIA)

8.00 DIA

(.472)

(.413)

12.00

10.50

(.519)

(.669)

13.20

17.00

(.25x.031)

6.35x0.80

(.283)

7.20

(.295)

7.50

(.039)

1.00

Keyway

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C84

1200 SERIES - MOMENTARY PUSHBUTTON SWITCHES

1233A2X209LUU Normally Open

The '2' following the 'A' in model no. indicates

black actuator. Substitute '6' for red or '7/1' for

white, if desired.

X209 - UL, CSA, VDE, SEMCO & NF-USE approved - solder lug/quick connect terminals

( Note- U187 ground connector ring required if panel is not

metallic or not connected to ground. Order separately).

SWITCH ACTION TERMINALS

Arrow indicates keyway

Solder lug/ quick-connect Screw Screw and clamp

PANEL CUT-OUT: .480" (12.2mm) dia.

GROUND CONNECTOR RING U187

Nickel plated

(.511)

13.00

(.25x0.031)(.25x0.031)

6.35x0.806.35x0.80

9.209.20

(.362)(.362)

10.5010.5012.0012.00

(.413)(.472)

12.00 DIAx0.75 SI12.00 DIAx0.75 SI

(.472 DIAx0.75 IS)(.472 DIAx0.75 IS)

14.0014.00

(.551)(.551)

(.519)(.519)

13.2013.20

17.0017.00

(.669)(.669)

8.00 DIA8.00 DIA

(.315DIA)(.315DIA)

1.00

(.039)(.039)

9.20

6.35x0.80

(.362)

(.25x.031)

(.122 DIA)

3.10 DIA

4.50

(.177)

(.283)

(.031)

(.118 DIAx0.50)

3.00 DIAx0.50

0.80

7.20

6.35

(.25)

6.35

9.20

0.80

3.00 DIAx0.50

(.118 DIAx0.50)

(.031)

(.362)

(.48 DIA)

(.826 DIA)

(.031)

(.25)

21.00 DIA

6.35

12.20 DIA

0.80

Keyway

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C85

1200M & 1200MR SERIES - MOMENTARY PUSHBUTTON SWITCHES

MATERIALS

Contacts: Silver

Actuator: Chrome plated brass on polyamide base

Case: Polyamide

Bushing: Nickel plated brass

Hardware: Supplied with 1 Hex Nut p/n U166 & 1 Panel Dress Nut U1868

SPECIFICATIONS

Contact ratings (resistive loads): 4 Amps at 250 VAC, 8 Amps at 125 VAC or 4 Amps at 24 VDC

Initial contact resistance: 10 milliohms max. at 1A 2VDC

Insulation resistance: 1000 megohms minimum at 500 VDC

Dielectric strength: 2000 V rms min. between terminals. 3000 V rms between terminals & frame

Electrical life: 10,000 cycles at full load

Operating temperature range: -20°C to +55°C

Total travel: NO: .177" (4.5mm) ± .011" (0.3mm) NC: .137" (3.5mm) ± .011" (0.3mm)

Solder lug/quick-connect terminals

1212MA Normally Closed

1213MAUU Normally Open

The 'M' in model no. indicates flat actuator.

Substitute 'MR' for domed actuator, if desired.

AGENCY RECOGNITION

Model no's. with 'UU' are UL & CSA recognized.

Marking: Switches are supplied with recognized marks.

Keyway

12.00 DIAx0.75 SI

17.00

(.519)

6.35x0.80

14.00

8.00 DIA

12.00

9.20

(.472 DIAx0.75 IS)

(.669)

(.551)

13.20

(.315 DIA)

(.25x0.031)

(.472)

(.362)

(.295)

(.196)

5.00

7.50

(.039)

1.00

5.00

(.196)

● Single pole panel mounting models.

● NC & NO electrical functions with double break.

● Solder lug, screw and screw with clamp terminals.

● Chrome plated domed or flat metal actuators .

FEATURES

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C86

1200M & 1200MR SERIES - MOMENTARY PUSHBUTTON SWITCHES

Straight screw terminals and clamp

Screw terminals

1222MA Normally Closed

1223MAUU Normally Open

The 'M' in model no. indicates flat actuator.

Substitute 'MR' for domed actuator, if desired.

1202MA Normally Closed

1203MAUU Normally Open

The 'M' in model no. indicates flat actuator.

Substitute 'MR' for domed actuator, if desired.

SWITCH ACTION TERMINALS

Arrow indicates keyway

Solder lug/ quick-connect Screw Screw and clamp

PANEL CUT-OUT: .480" (12.2mm) dia.

SPECIAL CAP NUT

U1874 Chrome plated cap nut, flat & plain

May be ordered in place of panel dress nut.

Order separately.

7.00

(.275)

6.35x0.80

(.25x.031)

17.00

13.20

(.669)

(.519)

12.00

(.472)

14.00

(.551)

12.00 DIAx0.75 SI

(.472 DIAx0.75 IS)

8.00 DIA

(.315 DIA)

(.295) (.196)

(.196)

5.00

7.50

(.039)

1.00

(.629 DIA)

(.137)

16.00 DIA

3.50

(.472 DIAx0.75 IS)

12.00 DIAx0.75 SI

13.20

(.669)

(.519)

17.00

(.551)

14.00

8.00

(.315) (.472)

12.00 7.50 5.00

(.196)

(.295)

(.315 DIA)

8.00 DIA

1.00

(.039)

(.196)

5.00

Keyway

(.25)

6.35

9.20

0.80

3.00 DIAx0.50

(.118 DIAx0.50)

(.031)

(.362)

(.283)

(.031)

(.118 DIAx0.50)

3.00 DIAx0.50

0.80

7.20

6.35

(.25)

9.20

6.35x0.80

(.362)

(.25x.031)

(.122 DIA)

3.10 DIA

4.50

(.177)

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C87

4700 & 4800 SERIES - MOM. & ALT. ACTION PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Contacts: Silver

Actuator & bushing: Polyamide

Case: Melamine-phenolic

Hardware: Supplied with 1 Hex Nut p/n U166 and 1 insulating Knurled Nut p/n U520.

Knurled Nut supplied same color as actuator. See hardware section of catalog.

● Single and double pole panel mounting models.

● ON-OFF & ON-ON alternate actions and OFF-MOM momentary action.

● Solder lug, straight p.c. and quick-connect terminals.

● 7 optional actuator colors with matching knurled mounting nut.

● Acutator returns to upper position after actuation.

SPECIFICATIONS

Contact ratings (resistive loads): 3 Amps at 250 VAC or 6 Amps at 125 VAC

Initial contact resistance: 10 milliohms max. at 1A 2VDC

Insulation resistance: 1000 megohms minimum at 500 VDC

Dielectric strength: 2000 V rms min. between terminals. 3000 V rms between terminals & frame

Electrical life: 10,000 cycles at full load

Operating temperature range: -20°C to +65°C

Total travel: .177" (4.5mm) ± .019" (0.5mm)

AGENCY RECOGNITION

Models ending in 'AUU' are UL, CSA and VDE recognized.

Models 4831A, 4836A, 4841A & 4846A are VDE recognized.

Marking: Switches are supplied with recognitions marked.

ORDER FORMAT

Fill in boxes below, for complete model number.

01 blue

02 black

03 green

05 yellow

06 red

07/ 1white

09 orange

Model Number Actuator & knurled nut color

Select model

number from

those shown

on next page.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C88

4700 & 4800 SERIES - MOM. & ALT. ACTION PUSHBUTTON SWITCHES

Solder lug/quick-connect terminals

Straight p.c. terminals

Quick-connect terminals - .185" x .031" (4.7mm x 0.8mm)

SWITCH ACTION TERMINALS

SINGLE DOUBLE

POLE POLE CIRCUIT

MODEL NO. MODEL NO.

4731AUU 4741AUU ON - OFF

4736AUU 4746AUU ON - ON

4733AUU 4743AUU OFF - MOM

Note: add color to model number -

see Order Format, prior page.

SINGLE DOUBLE

POLE POLE CIRCUIT

MODEL NO. MODEL NO.

4831A 4841A ON - OFF

4836A 4846A ON - ON

4833A 4843 OFF - MOM

Note: add color to model number -

see Order Format, prior page.

SINGLE

POLE CIRCUIT

MODEL NO.

47318AUU ON - OFF

47368AUU ON - ON

47338AUU OFF - MOM

Note: add color to model number -

see Order Format, prior page.

Arrow indicates keyway

Quick-connect .185" x .031"

Solder lug/ quick-connect Straight p.c. (4.7mm x 0.8mm)

PANEL CUT-OUT: .480" (12.2mm) dia.

123 2 1

(.11x.019)

(.283)

7.20

2.80x0.50

(.047)

(.094)

2.40

1.20

(.047x.019)

1.20x0.5

(.196)

5.00

(.244)

(6.20)

(.055 DIA)

1.40 DIA

4.70

3.00

8.20

(.118)

(.322)

(.185)

8.40 5.80

1.20x0.50

1.20x0.5

16.50

8.00

(.826)

(.905)

5.00 15.50 11.50 7.30

12.00 DIAx0.75 SI

5.00 14.50

(.287)

(.047x.019)

(.314)

(.649)

(.228)(.33)

21.00

A1

A2

A3

B4

B5

B6

(.452)(.61)(.196)

23.00

(.57)

(.196)

(.047x.019)

(.472 DIAx0.75 IS)

(.287)

7.30

12.50

(.492)

8.00 DIA

(.315 DIA)

Keyway

Function 6 Function 4

DPSP

SP

DP

(.283)

7.20

3

2

1

(.472 DIAx0.75 IS)

(.472)

(.748)

(.11x.019) (.11x.019)

(.315 DIA)

12.00

19.00

(.33)

8.40 5.80

(.228)

12.00 DIAx0.75 SI

8.00 DIA

(.283)

2.80x0.50

12.50

7.30

(.287)

(.492)

2.80x0.50

7.20

(.228)

5.80

(.33)

8.40

(.551)

14.00

15.00

(.59)

(.452)

11.50

(.287)

7.30

(.303)

(.472)

7.70

12.00

(.322)

8.20

14.0012.50

(.551)(.492)

19.00

(.748)

(.472 DIAx0.75 IS)

12.00 DIAx0.75 SI

0.80

(.031)

7.30

(.287)

(.185)

4.70

(.303)

7.70

8.00 DIA

(.315 DIA)

3

2

1

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C89

MD SERIES - PUSHBUTTON SWITCHES

FEATURES

MATERIALS

Terminals: Silver plated brass

Actuator: Polyacetal

Frame: Steel with tin plating

Base: Phenolic laminated sheet

Sliding contact: Silver plated phosphor bronze

SPECIFICATIONS

Contact ratings (resistive loads): 200 mA at 30 VDC

Initial contact resistance: 20 milliohms maximum

Insulation resistance: 100 megohms minimum at 500 VDC

Dielectric strength: Type 5: 500 VAC for 1 minute. Type 8: 250 VAC for 1 minute.

Electrical life: 10,000 cycles minimum

Operating temperature range: -20°C to +85°C

Operating force: Type 5: 300g ± 150g Type 8: 330g ± 150g

● Momentary or maintained actions.

● 1, 2 & 4 pole 2 throw models.

● Printed circuit & panel mounting models.

● Self-cleaning bifurcated contacts.

MDPS522PN (MOMENTARY) 2P2T P.C. MOUNTING

MDPA522PN (MAINTAINED)

SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C90

MD SERIES - PUSHBUTTON SWITCHES

MDPS522WN (MOMENTARY) 2P2T PANEL MOUNTING

MDPA522WN (MAINTAINED)

MDPS542PN (MOMENTARY) 4P2T P.C. MOUNTING

MDPA542PN (MAINTAINED)

MDPS542WN (MOMENTARY) 4P2T PANEL MOUNTING

MDPA542WN (MAINTAINED)

MDPS822PN (MOMENTARY) 2P2T P.C. MOUNTING

MDPA822PN (MAINTAINED)

SCHEMATIC MECHANICAL OUTLINE

SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT

SCHEMATIC MECHANICAL OUTLINE

SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C91

MD SERIES - PUSHBUTTON SWITCHES

Series Action Type No. of Poles Throws Terminals Contacts

TYPE 5:

'BUILD YOUR OWN SWITCH' ORDER FORMAT

Fill in boxes with selections shown for complete model number.

(Allowable options are shown under each respective box).

Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications.

Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply

selecting from all available options shown and filling in the boxes.

M

PSMomentary

PAMaintained

Non-shorting *

D

Example of completely specified

model number: MDPS542WN

PRINTED CIRCUIT SOLDER LUG

TERMINAL CONFIGURATIONS COLOR KNOBS FOR TYPE 8 MODELS

22 pole

44 pole

5

Pp.c.

Wsolder lug

2N

Series Action Type No. of Poles Throws Terminals Contacts

TYPE 8:

M

PSMomentary

PAMaintained

Non-shorting *

D

11 pole

22 pole

8P

2N

Printed circuit

MODEL NO. COLOR

C152 Black

C154 Gray

C156 Red

New!

*Shorting available-

consult factory.

SNAP FIT CAPS FOR TYPE 5 MODELS (order separately)

C7 Natural aluminum C80 Thermoplastic C90 Thermoplastic

C7A Black aluminum Replace 0 in above model numbers with color code from chart

Color Code

1Blue

2Black

3Green

5Yellow

6Red

8White

E

C

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C92

MD2 SERIES - PUSHBUTTON SWITCHES

FEATURES

● Power ratings include TV-5

● Single pole single throw alternate action.

● UL, CSA, VDE and SEMKO recognized.

● Panel mounting with threaded mounting holes

and p.c. mounting with restraining bracket.

MATERIALS

Base: Phenolic, UL94V-O

Frame: Zinc plated steel (panel mtg. models)

Tin plated steel (p.c. mtg. models)

Actuator: PBT, nylon 66, UL94V-2 min.

Terminals: Silver plated copper alloy

Contacts: Silver copper alloy

GENERAL SPECIFICATIONS

ELECTRICALS

Contact ratings: UL & CSA: 15 amps @ 125 VAC, 10 amps @ 250 VAC, TV-5

VDE & SEMCO: 5A/80A @ 250 VAC µT85

Insulation resistance: 100 megohms min. (500 VDC)

Dielectric withstanding voltage: 1000 VAC for 1 minute

Contact resistance: 20 milliohms max.

Electrical life: 10,000 cycles min.

Mechanical life: 30,000 cycles min.

MECHANICALS, THERMALS

Actuation force: 400 grams ±200 grams

Operating temperature range: -10 °C to +85 °C

SOLDERING

Solder heat resistance: 230°C max. for 3 ±0.5 seconds

P.C. MOUNTING

MD2BM4T0

SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT

SCHEMATIC MECHANICAL OUTLINE

PANEL MOUNTING WITH

SOLDER LUG TERMS.

MD2CP4T3

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C93

1400N SERIES - MOM. SNAP-IN PUSHBUTTON SWITCHES

FEATURES

● Snap-in mounting with square actuator.

● Single pole NO, NC & NC/NO actions.

● Solder lug, straight p.c. or quick-connect terminals.

MATERIALS

Case: Polyamide, black

Actuator: Polyamide

Contacts: Silver plated copper

SPECIFICATIONS

Maximum ratings (resistive load): 2 Amps @250VAC pr 4 Amps @125VAC

Initial contact resistance: 10 milliohms at 1A 2VDC

Insulation resistance: 1000 megohms min. (500 VDC)

Dielectric withstanding voltage: 1500 Vrms between terminals - 2000 Vrms between terminals & metal panel

Electrical life: 10,000 cycles min.

Panel thickness: .078" (2mm) max.

Operating temperature range: -20 °C to +55 °C

SOLDER LUG PRINTED CIRCUIT QUICK-CONNECT

.185"X.031" (4.7X0.8mm)

New!

Solder lug or quick-connect terminals

1412NC2 Normally Closed

1413NC2 Normally Open

1415NC2 Changeover

The '2' in model no. indicates black actuator.

Substitute '3' for green, '6' for red or '7' for

ivory, if desired.

Substitute 'N8' for 'N' in model number for

quick-connect terminals.

Straight printed circuit terminals

1442NC2 Normally Closed

1443NC2 Normally Open

1445NC2 Changeover

The '2' in model no. indicates black actuator.

Substitute '3' for green, '6' for red or '7' for

ivory, if desired.

CROSS SECTION TERMINALS PANEL CUT-OUT

12.00

18.00

0.80

4.70

7.40

1.50

3.50

16.00

14.00

18.00

6.00

13.00

(.185)

(.291)

(.630)

(.708)

(.551)

(.137)

(.059)

(.512)

(.236)

(.031)

(.472)

1.201.20

(.551)(.551)

14.0014.00

(.630)(.630)

16.0016.00

(.031)(.031)

(.291)(.291)(.185)(.185)

7.407.404.704.70

0.800.80

(.059)(.059)

(.137)(.137)

3.503.50

1.501.50

(.472)(.472)

12.0012.00

(.472)(.472)

(.708)(.708)

18.00

12.00

5.005.00

(.512)(.512)

13.0013.00

(.197)(.197)

(.047)(.047)

4.704.70

(.185)(.185)

7.407.40

(.059)(.059)

(.062DIA)(.062DIA)

1.60 DIA1.60 DIA

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C94

AV SERIES

PUSHBUTTON SWITCHES

All AV Series models are

rugged, durable, cosmet-

ically attractive and feature:

●Minimum clearance

between actuator and

bushing, to prevent

willful damage by means

of insertion of foreign

parts or matter.

●Protection against

crushing of contacts

and switch mechanism.

●Front panel sealing to

IEC specification IP54

with optional sealing to

IP65 (closest NEMA

equivalents are 3S and

6&6P respectively).

The AV Series consists of 3 categories of pushbutton switches designated Anti-Vandal, Security

and Snap-Action Security. The distinctive features are:

Anti-Vandal - Highest impact resistance provided by a knurled back nut or mechanical stop and

added ruggedness provided by a stainless steel actuator and bushing. The 19mm models meet IK08

which specifies the switch must withstand a hammer blow to the actuator with a striking energy of 6

joules, while the 22mm models meet IK10 which specifies the switch must similarly withstand 20 joules

of energy (see table on next page). In both of these cases, no resulting damage is permissible.

Security - High impact resistance and ruggedness with a large variety of options, including actuator

shapes, electrical functions, connections, finish and marking options.

Snap-Action Security - High impact resistance and ruggedness. All of these models feature tactile

response and optional illumination and marking.

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C95

AV SERIES

PUSHBUTTON SWITCHES

1st number:

Protection against entry of solid objects

IP Degree of protection

0Non-protected

1Protected against solid

objects 1.968" (50mm)

and greater

2Protected against solid

objects .492" (12.5mm)

and greater

3Protected against solid

objects .098" (2.5mm)

and greater

4Protected against solid

objects .039" (1mm)

and greater

5Dust protected

(no harmful ingress)

6Dust-tight (no ingress)

3rd number

Protection against external mechanical impacts

.748" (19mm) dia. models .866" (22mm) dia. models

Degree of protection IP..7 IP..9

according to NFC striking energy striking energy

20-010 (Oct. 86) 6 joules 20 joules

Hammer radius 50 mm (6 Nm) (20 Nm)

Degree of protection IK08 IK10

according to EN striking energy striking energy

50102 (June 95) 5 joules (5Nm) 20 joules (20Nm)

(NFC 20-015) Hammer rad. 25mm Hammer rad. 50mm

Impacts on actuator 10 strokes 10 strokes

according to striking energy striking energy

CECC 96000 1 joule 5 joules

Hammer radius 10 mm 1 Nm 5 Nm

EXPLANATION OF DEGREES OF PROTECTION (IP AND IK CODES)

IP659 mechanical protection

(optional)

protection against water

protection against dust

2nd number:

Protection against liquids

IP Degree of protection

0Non-protected

1Protected against vert-

ically falling water

drops

2Protected against vert-

ically falling water

drops when enclosure

is tilted up to 15°

3Protected against water

sprayed vertically at an

angle of up to 60°

4Protected against

splashing water

5Protected against water

jets from any direction

IP... defines the degree of protection provided by the enclosures of electric appliances according to IEC529, DIN 40050 and

NFC 20-010. Note - the closest NEMA conversions for IP54 and IP65 are 3S and 6&6P, respectively, however they should

not be considered equivalent as the NEMA standards test for environmental conditions while the IEC specifications do not.

IK... defines the degree of protection provided by the enclosures of electric appliances against external mechanical impacts

according to EN 50102 (NFC 20-015).

The degree of protection is indicated by 2 letters and 3 numbers.The tables list the degree of protection for the 3 numbers.

Example:

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C96

AV SERIES

PUSHBUTTON SWITCHES

New!

Anti-Vandal

Security

CATEGORY RESISTIVE RATINGS ELECTRICAL . SIZE PAGE

& MISCELLANEOUS CONFIGURATION (mm)

2 A 48 VDC SPST NO Momentary 19 C97

2 A 48 VDC SPST NO Momentary 22 C98

100-400 mA 48 VDC SPST NO Momentary 16 C99

1 A 30 V SPST NC/NO Momentary 19 C100

2 A 48 VDC SPST NO Momentary 19 C101

2 A 48 VDC SPST NO Momentary 22 C102

3 A 125 VAC, 2 A 250 VAC, SPST NC Momentary

& 2.5 A 24 VDC 22 C103

3 A 120 VAC or 28 VDC, SPST NO Momentary 19 C104

1.5 A 250 VAC & Dry Circuit

3 A 120 VAC or 28 VDC, SPST ON-OFF Alternate

1.4 A 250 VAC & Dry Circuit action & NO Momentary 19 C105

Large Actuators:

5 A 250 VAC SPDT NC/NO Momentary 22 C106

5 A 250 VAC SPDT NC/NO Momentary 24 C107

Mushroom Head Actuator:

5 A 250 VAC SPDT NC/NO Momentary 22 C108

6 A 125 VAC, 3 A 250 VAC DPDT ON-ON alternate

or 24 VDC action 22 C109

6 A 125 VAC, 3 A 250 VAC, SPDT & DPDT NC/NO

7 A 30 VDC & Dry Circuit Momentary 19 C110

6 A 125 VAC, 3 A 250 VAC,

7 A 30 VDC & Dry Circuit SPDT NC/NO Momentary 19 C111

Options for Security

pushbutton switches C112

LED illumination;

50 mA 24 VDC SPST NO Mom. 19 C113

Options for Snap-Action

Security pushbutton switches C114

6 A 250 VAC, 10 mA 5 VAC SPDT & DPDT alternate

action 22&24 C115

AV Series switches are listed below by category;

Anti-Vandal, Security and Snap-action Security.

To assist in locating the correct switch for your application, ratings, electrical configuration and

mounting bushing diameter are shown. Many special features may be found by reviewing the

pages in this section.

New!

Snap-action

Security

New!

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C97

FEATURES

AV SERIES ANTI-VANDAL PUSHBUTTON SWITCHES

.748" (19mm) or .866" (22mm) bushing diameter

N - no sealing - meets IP54

(std'd)

T Internal seal &

front panel seals meet IP65

Schematic Mounting Holes

9D flat Act. w/flush 19 curved Act. & Bush. 09 flat Act. & curved Bush.

mount Bush.

Min. dimensions for matrix

mounting: 1.181" (30mm) x

1.181" (30mm).

For 9D Bush/Act

For 09 & 19 Bush/Act

12

MATERIALS

Contacts & terminals: Silver plated brass

Bushing & Actuator: Stainless steel

Case: PBT Hex. Mounting Nut: Nickel plated brass

AV091003C940N

(Model shown)

N and T sealing options also feature

increased impact resistance provided

by knurled nut as shown.

19mm Bushing/Actuator configurations Screw terminals (9) Solder lug/quick-connect terminals (2)

● Single pole NO momentary action.

● Standard - panel sealing protection per IP54.

● Optional - panel sealing protection per IP65.

● Extremely rugged and durable.

SPECIFICATIONS

Contact ratings: 2 A at 48 VDC max. (resistive load)

Initial contact resistance: 10 milliohms max. at 1 A, 2 V

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 2000 V rms min. between terminals

and frame and between terminals

Electrical life: 10,000 cycles min. at full load

Mechanical life: 1,000,000 cycles min.

Operating temperature range: -20°C to +55°C

Panel thickness: .039" (1mm) to .433" (11mm)

Series Bush./Act. Body Style Function Cont.Matl. Term.Type Bush./Act. Sealing

Config. Matl.

AV 100 3 C 40

09 9 N

19 2 T

9D

Sealing

Complete model no. examples:

Flat actuator 09:

Screw terminals

AV091003C940N

Solder lug/quick-connect terminals

AV091003C240N

Curved actuator 19:

Screw terminals

AV191003C940N

Solder lug/quick-connect terminals

AV191003C240N

Flat actuator/flush mount 9D:

Screw terminals

AV9D1003C940N

Solder lug/quick-connect terminals

AV9D1003C240N

ORDER FORMAT: For

complete model no., fill in

empty boxes with select-

ed options shown below.

Example of complete

model no. -

AV191003C940N

STANDARD STOCK MODELS:

AV091003C240N

AV091003C940N

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C98

AV SERIES ANTI-VANDAL PUSHBUTTON SWITCHES

.748" (19mm) or .866" (22mm) bushing diameter

Series Bush./Act. Body Style Function Cont.Matl. Term.Type Bush./Act. Sealing

Config. Matl.

N - no sealing - meets IP54

(std'd)

T Internal seal &

front panel seals meet IP65

Schematic Mounting Holes

Min. dimensions for matrix

mounting: 1.181" (30mm) x

1.181" (30mm).

For 02 & 03 Bush/Act

12

AV021003C940N

(Model shown)

For M2 & M3 Bush/Act

02 curved Act. & Bush. 03 flat Act. & curved Bush.

M2 curved Actuator & curved Bushing with 'D' flat on Bushing

or

M3 flat Actuator & curved Bushing with 'D' flat on Bushing

22mm Bushing/Actuator configurations Screw terminals (9) Solder lug/quick-connect terms. (2)

AV 100 3 C 40

02 9 N

03 2 T

M2

M3

Sealing

N and T sealing options also feature

increased impact resistance provided

by an internal ring as shown.

Complete model no. examples:

Flat actuator 03:

Screw terminals

AV031003C940N

Solder lug/quick-connect terminals

AV031003C240N

Curved actuator 02:

Screw terminals

AV021003C940N

Solder lug/quick-connect terminals

AV021003C240N

Flatted bushing M2 & M3:

Flat actuator/screw terminals

AVM31003C940N

Curved actuator/screw terminals

AVM21003C940N

ORDER FORMAT: For

complete model no., fill in

empty boxes with select-

ed options shown below.

Example of complete

model no. -

AV021003C940N

STANDARD STOCK MODELS:

AV031003C240N

AV031003C940N

AVM21003C940T

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C99

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

.629" (16mm) bushing diameter

(NONE) - no sealing - meets

IP54

K Internal seal &

front panel seals meet IP65

Schematic Sealing Mounting Hole

08 curved Act. w/chamfer 16 curved Actuator 06 flat Act. & curved Bush.

12

MATERIALS

Contacts & terminals: Silver plated brass

Bushing & Actuator: Nickel plated brass or stainless steel

Case: PBT Hex. Mounting Nut: Nickel plated brass

AV0630C900

(Model shown)

16mm Bushing/Actuator configurations Screw terminals (9)

SPECIFICATIONS

Contact ratings: 100-400 mA 48VDC max. (resistive ld.)

Initial contact resistance: 50 milliohms max.

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 2000 V rms min. between terminals

and frame

Electrical life: 50,000 cycles min. at 200 mA 48VDC

Mechanical life: 1,000,000 cycles min.

Operating temperature range: -20°C to +55°C

Panel thickness: .039" (1mm) to .236" (6mm)

Series Bush./Act. Function Case Cont.Matl. Term.Type Bush./Act. Sealing

Config. style Matl.

AV 3 0 C 9

06 00 (NONE)

16 40 K

08

Complete model no. examples:

Flat actuator 06:

Nickel plated brass bushing and

actuator 00

AV0630C900

Curved actuator 16:

Stainless steel bushing and

actuator 40

AV1630C940

Curved actuator w/chamfer 08:

Nickel plated brass bushing and

actuator 00, and IP67 sealing K

AV0830C900K

ORDER FORMAT: For

complete model no., fill in

empty boxes with select-

ed options shown below.

Example of complete

model no. -

AV0630C900

New!

● Single pole NO momentary action.

● Standard - panel sealing protection per IP54.

● Optional - panel sealing protection per IP65.

● Extremely rugged and durable.

Min. dimensions for matrix

mounting: .944" (24mm) x

.944" (24mm).

STANDARD STOCK MODELS:

AV0630C900

AV0630C940

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C100

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

.748" (19mm) bushing diameter

(NONE) - no sealing - meets

IP54

Schematic Sealing Mounting Hole

09 flat Act. & curved Bush. 19 curved Act. & Bush. Rear view of all models

Min. dimensions for matrix

mounting: 1.181" (30mm) x

1.181" (30mm).

12

MATERIALS

Contacts & terminals: Gold plated Silver

Bushing & Actuator: Nickel plated brass

Case: PBT Hex. Mounting Nut: Nickel plated brass

AV199035D200

(Model shown)

19mm Bushing/Actuator configurations Solder lug terminals (2)

● Single pole combined NC/NO momentary action.

● Standard - panel sealing protection per IP54.

● Optional - panel sealing protection per IP65.

● Extremely rugged and durable.

SPECIFICATIONS

Contact ratings: 1 A at 30 V max. (resistive load)

10µA at 5 V min.

Note: current above 100 mA damages the gold plating

Initial contact resistance: 10 milliohms max. at 1 A, 2 V

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 2000 V rms min. between terminals

and frame

Electrical life: 250,000 cycles min. at full load

Mechanical life: 1,000,000 cycles min.

Operating temperature range: -20°C to +55°C

Panel thickness: .039" (1mm) to .433" (11mm)

Series Bush./Act. Case Style Function Cont.Matl. Term.Type Bush./Act. Marking* Sealing

Config. Matl.*

AV 903 5 D 2 00

09 (NONE)

19 K

Complete model no. examples:

Flat actuator & curved bushing 09:

AV099035D200

Curved actuator & bushing 19:

AV199035D200

ORDER FORMAT:

For complete model no.,

fill in empty boxes with

selected options shown

below. Example of

complete model no. -

AV199035D200

K Internal seal &

front panel seals meet IP65

* - see Options page

STANDARD STOCK MODELS:

AV099035D200

AV199035D200

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C101

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

.748" (19mm) or .866" (22mm) bushing diameter

(NONE) - no sealing - meets

IP54

Schematic Sealing Mounting Hole

Min. dimensions for matrix

mounting: 1.181" (30mm) x

1.181" (30mm).

12

MATERIALS

Contacts & terminals: Silver plated brass

Bushing & Actuator: Nickel plated brass

Case: PBT Hex. Mounting Nut: Nickel plated brass

AV191003C900

(Model shown)

19mm Bushing/Actuator configurations Screw terminals (9) Solder lug/quick-connect terminals (2)

● Single pole NO momentary action.

● Standard - panel sealing protection per IP54.

● Optional - panel sealing protection per IP65.

● Extremely rugged and durable.

SPECIFICATIONS

Contact ratings: 2 A at 48 VDC max. (resistive load)

Initial contact resistance: 10 milliohms max. at 1 A, 2 V

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 2000 V rms min. between terminals

and frame and between terminals

Electrical life: 10,000 cycles min. at full load

Mechanical life: 1,000,000 cycles min.

Operating temperature range: -20°C to +55°C

Panel thickness: .039" (1mm) to .433" (11mm)

Series Bush./Act. Case Style Function Cont.Matl. Term.Type Bush./Act. Marking* Sealing

Config. Matl.*

AV 100 3 C 00

09 9 (NONE)

19 2 K

9P

9B

Complete model no. examples:

Flat actuator 09:

Screw terminals AV091003C900

Solder lug/quick-connect terminals

AV091003C200

Curved actuator 19:

Screw terminals AV191003C900

Solder lug/quick-connect terminals

AV191003C200

Flat act. w/knurled nut 9P:

Screw terminals AV9P1003C900

Solder lug/quick-connect terminals

AV9P1003C200

ORDER FORMAT:

For complete model no.,

fill in empty boxes with

selected options shown

below. Example of

complete model no. -

AV191003C900

K Internal seal &

front panel seals meet IP65

New!

* - see Options page

With knurled nut for matrix mtg. .984"(25mm) x .984"(25mm)

Wrench available p/n U1929, order separately

9B curved Act. 9P flat Act.

w/knurled nut w/knurled nut 19 curved Actuator 09 flat Actuator

STANDARD STOCK MODELS:

AV091003C200

AV091003C900

AV091003C900K

AV191003C900

AV191003C900K

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C102

AV SERIES SECURITY PUSHBUTTON SWITCHES

.748" (19mm) or .866" (22mm) bushing diameter

Schematic Sealing Mounting Holes

AV021003C900

(Model shown)

02 curved Act. & Bush. 03 flat Act. & curved Bush.

M2 curved Actuator & curved Bushing with 'D' flat on Bushing

or

M3 flat Actuator & curved Bushing with 'D' flat on Bushing

22mm Bushing/Actuator configurations Screw terminals (9) Solder lug/quick-connect terms. (2)

Complete model no. examples:

Flat actuator 03:

Screw terminals

AV031003C900

Solder lug/quick-connect terminals

AV031003C200

Curved actuator 02:

Screw terminals

AV021003C900

Solder lug/quick-connect terminals

AV021003C200

Flatted bushing M2 & M3:

Flat actuator/screw terminals

AVM31003C900

Curved actuator/screw terminals

AVM21003C200

Series Bush./Act. Case Style Function Cont.Matl. Term.Type Bush./Act. Marking* Sealing

Config. Matl.*

AV 100 3 C 00

02 9 (NONE)

03 2 K

M2

M3

ORDER FORMAT: For

complete model no.,

fill in empty boxes with

select-ed options

shown below.

Example of complete

model no. -

AV021003C900

New!

(NONE) - no sealing - meets

IP54

12

K Internal seal &

front panel seals meet IP65 Min. dimensions for matrix

mounting: 1.181" (30mm) x

1.181" (30mm).

For 02 & 03 Bush/Act

For M2 & M3 Bush/Act

* - see Options page

STANDARD STOCK MODELS:

AV021003C900

AV031003C200

AV031003C900

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C103

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

.866" (22mm) bushing diameter

(NONE) - no sealing - meets

IP54

Schematic Sealing Mounting Hole

03 flat Act. & curved Bush. 02 curved Act. & Bush. Rear view of all models

Min. dimensions for matrix

mounting: 1.181" (30mm) x

1.181" (30mm).

12

MATERIALS

Contacts & terminals: Silver plated copper

Bushing & Actuator: Nickel plated brass

Case: PBT Hex. Mounting Nut: Nickel plated brass

AV021202C000

(Model shown)

22mm Bushing/Actuator configurations Straight screw terminals w/clamp (0)

● Single pole NC momentary action.

● Standard - panel sealing protection per IP54.

● Optional - panel sealing protection per IP65.

● Extremely rugged and durable.

Series Bush./Act. Case Style Function Cont.Matl. Term.Type Bush./Act. Marking* Sealing

Config. Matl.*

AV 120 2 C 0 00

02 (NONE)

03 K

Complete model no. examples:

Flat actuator & curved bushing 03:

AV031202C000

Curved actuator & bushing 02:

AV021202C000

ORDER FORMAT:

For complete model no.,

fill in empty boxes with

selected options shown

below. Example of

complete model no. -

AV021202C000

K Internal seal &

front panel seals meet IP65

SPECIFICATIONS

Contact ratings: Max. resistive loads; 3 A 125VAC

2 A 250VAC & 2.5 A 24VDC

Initial contact resistance: 10 milliohms max. at 1 A, 2 V

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 2000 V rms min. between terminals

and frame and between terminals

Electrical life: 250,000 cycles min. at full load

Mechanical life: 100,000 cycles at 0.3 A 24V, 10,000

cycles at full load

Operating temperature range: -20°C to +55°C

Panel thickness: .039" (1mm) to .433" (11mm)

* - see Options page

STANDARD STOCK MODELS:

AV021202C000

AV031202C000

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C104

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

.748" (19mm) bushing diameter

Series Bush./Act. Body Term. Cont. Term. Sealing Agency

Config. Style Type Matl. Seal Recognition

Blank - no sealing - meets

IP54 (std'd)

Schematic Sealing Mounting Hole

09 flat Act. & 19 curved Act. & 29 extended Act. 39 threaded Act. 49 thd'd Act. with Rear view

curved Bushing Bushing (standard) & curved bushing & curved bushing mushroom cap & all models

curved bushing

12

AV19301ZQEUL

(Model shown)

SPECIFICATIONS

Contact ratings: Max. resistive loads: Q - 3 A 120 VAC

(and life) or 28 VDC, 1.5 A 250 VAC - 10,000

cycles min. Also 1 A 120 VAC or 28

VDC, 0.5 A 250 VAC - 250,000 cycles

min. B - 0.4 Volt-Amps max at 20 V

max. - 250,000 cycles min.

Initial contact resistance: 10 mΩ max. at 3 V, 0.1 A

Insulation resistance: 10,000 megohms min.

Dielectric strength: 1000 V rms min.

Operating temperature range: -30°C to +85°C

For additional specifications: See 300 Series switches

Min. dimensions for matrix

mounting: .984" (25mm) x

.984" (25mm).

MATERIALS

Contacts: Q - Coin silver for power & UL models. B - Gold over

nickel over brass for dry circuit models.

Bushing & Actuator: Nickel plated brass (std'd)

Case: Diallyl Phthalate Hex. Mounting Nut: Nickel plated brass

● .755" (19 mm) dia. models.

19mm Bushing/Actuator configuration Solder lug terminals - (Z)

Notes to Order Format:

301 models have .020"

(0.5mm) overtravel and

.110" (2.79mm) total

travel.

305 models have .080"

(2.03mm) overtravel and

.110" (2.79mm) total

travel.

UL option available only

with Q option. UL rating:

1 A 125 VAC or 0.5 A

250 VAC (75% power

factor). UL file E66367.

E option is epoxy terminal

seal - standard .

K Internal seal &

front panel seals meet

IP65

AV Z E

09 301 B (NONE) (NONE)

19 305 Q K U L

29

39

49

● Single pole NO momentary action.

● Standard - sealing protection per IP54.

● Optional - sealing protection per IP65.

● Extremely rugged and durable.

ORDER FORMAT:

For complete model no.,

fill in boxes with selected

op-tions shown below.

Example of complete

model no. -

AV19301ZQEKUL For mushroom cap (49) only: Add color code at end of above model

number - 0 for natural or 6 for red (consult factory for other colors).

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C105

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

.748" (19mm) bushing diameter

Series Bush./Act. Body Term. Cont. Term. Sealing Agency

Config. Style Type Matl. Seal Recognition

Blank - no sealing - meets

IP54(std'd)

Schematic Sealing Mounting Hole

12

AV19401ZQEUL

(Model shown)

SPECIFICATIONS

Contact ratings: Max. resistive loads: Q - 3 A 120 VAC

(and life) or 28 VDC, 1.5 A 250 VAC - 10,000

cycles min. Also 1 A 120 VAC or 28

VDC, 0.5 A 250 VAC - 250,000 cycles

min. B - 0.4 Volt-Amps max at 20 V

max. - 250,000 cycles min.

Initial contact resistance: 10 mΩ max. at 3 V, 0.1 A

Insulation resistance: 10,000 megohms min.

Dielectric strength: 1000 V rms min.

Operating temperature range: -30°C to +85°C

For additional specifications: See 400 Series switches

Min. dimensions for matrix

mounting: .984" (25mm) x

.984" (25mm).

MATERIALS

Contacts: Q - Coin silver for power & UL models. B - Gold over

nickel over brass for dry circuit models.

Bushing & Actuator: Nickel plated brass (std'd)

Case: Diallyl Phthalate Hex. Mounting Nut: Nickel plated brass

● .755" (19 mm) dia. models.

19mm Bushing/Actuator configuration Solder lug terminals - (Z)

Notes to Order Format:

401 is alternate action.

402 is momentary action.

401 models have .026"

(0.7mm) to contact closure,

.106" (2.7mm) travel to

activate switch and .137"

(3.5mm) total travel.

UL option available only

with Q option. UL rating:

1 A 125 VAC or 0.5 A

250 VAC (75% power

factor). UL file E66367.

E option is epoxy terminal

seal - standard.

K Internal seal &

front panel seals meet

IP65

● Single pole ON-OFF alternate & momentary actions.

● Standard - sealing protection per IP54.

● Optional - sealing protection per IP65.

● Extremely rugged and durable.

AV Z E

09 401 B (NONE) (NONE)

19 402 Q K U L

29

39

49

09 flat Act. & 19 curved Act. & 29 extended Act. 39 threaded Act. 49 thd'd Act. with Rear view

curved Bushing Bushing (standard) & curved bushing & curved bushing mushroom cap & all models

curved bushing

ORDER FORMAT:

For complete model no.,

fill in boxes with selected

op-tions shown below.

Example of complete

model no. -

AV19401ZQEKUL For mushroom cap (49) only: Add color code at end of above model

number - 0 for natural or 6 for red (consult factory for other colors).

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C106

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

WITH LARGE ACTUATOR

Schematic Bushing/actuator Mat'l.'s Mounting Hole

C recessed Actuator B curved Actuator P flat Actuator

Min. dimensions for matrix

mounting:

1.181" (30mm) x 1.181"

(30mm).

AV22LP402

(Model shown)

SPECIFICATIONS

Contact ratings: 5 A at 250VAC

Initial contact resistance: 100 milliohms max.

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 2000 V rms min. between terminals

and frame

Electrical life: 1,000,000 cycles min. at 1A 250VAC or

100,000 cycles at full load

Mechanical life: 3,000,000 cycles min.

Operating temperature range: -20°C to +55°C

Panel thickness: .039" (1mm) to .236" (6mm)

● .866" (22 mm) dia. or .944" (24mm) dia. bushing.

MATERIALS

Contacts: Silver/nickel alloy

Bushing & Actuator: Stainless steel

Case: Polyester, glass filled Hex. Mtg. Nut: Nickel plated brass

Series Bushing Bush./act. Actuator Bush./act. Contact/

diameter config. style mat'l. terminals

22mm Bushing/Actuator configurations Solder lug (2) or quick-connect terminals (4)

AV 22 L

P 40 2 solder lug terminals

B 20 4 quick-connect terms.

C 1X (see below)

2X (see below)

4X (see below)

New!

● Single pole combined NC/NO momentary action.

● Standard - panel sealing protection per IP65.

● Extremely rugged and durable.

ORDER FORMAT: For

complete model no., fill in

empty boxes with select-

ed options shown below.

Example of complete

model no. -

AV22LP402

Complete model no. examples:

Flat actuator P:

Solder lug terminals AV22LP402

Solder lug terms., black bushing

and red actuator AV22LP164

Curved actuator B:

Solder lug terminals AV22LB402

Quick-connect terminals AV22LB404

Recessed actuator C:

Solder lug terminals AV22LC402

Quick-connect terminals AV22LC404

40 Stainless steel bushing and

actuator material is standard.

Other options -

20 Chrome plated brass bushing

and actuator material.

Colored actuators* -

1X Black chrome plated brass

bushing with anodized aluminum

actuator.

2X Chrome plated brass bushing

with anodized aluminum actuator.

4X Stainless steel bushing with

anodized aluminum actuator.

* Replace X in above option numbers

for color: 2 black, 3 pale green,

5 gold yellow or 6 red

0- ring front panel seal

meets IP67

Sealing (standard)

'o' ring seal

STANDARD STOCK MODELS:

AV22LC164

AV22LP402

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C107

AV SERIES SECURITY PUSHBUTTON SWITCHES

WITH LARGE ACTUATOR

Schematic Bushing/actuator Material Mounting Hole

C recessed Actuator B curved Actuator P flat Actuator

40 Stainless steel bushing and

actuator material is standard.

Other options -

20 Chrome plated brass bushing

and actuator material.

Colored actuators* -

1X Black chrome plated brass

bushing with anodized aluminum

actuator.

2X Chrome plated brass bushing

with anodized aluminum actuator.

4X Stainless steel bushing with

anodized aluminum actuator.

* Replace X in above option numbers

for color: 2 black, 3 pale green,

5 gold yellow or 6 red

Series Bushing Bush./act. Actuator Bush./act. Contact/

diameter config. style mat'l. terminals

24mm Bushing/Actuator configurations Solder lug (2) or quick-connect terminals (4)

AV 24 L

P 40 2 solder lug terminals

B 20 4 quick-connect terms.

C 1X (see below)

2X (see below)

4X (see below)

New!

ORDER FORMAT: For

complete model no., fill in

empty boxes with select-

ed options shown below.

Example of complete

model no. -

AV24LP402

(Model shown)

0- ring front panel seal

meets IP67

Sealing (standard)

Complete model no. examples:

Flat actuator P:

Solder lug terminals

AV24LP402

Solder lug terms., black bushing and

red actuator

AV24LP164

Curved actuator B:

Solder lug terminals

AV24LB402

Quick-connect terminals

AV24LB404

Recessed actuator C:

Solder lug terminals

AV24LC402

Quick-connect terminals

AV24LC404

'o' ring seal

Min. dimensions for matrix

mounting:

1.299" (33mm) x 1.299"

(33mm).

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C108

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

WITH MUSHROOM HEAD ACTUATOR

0-ring front panel seal

meets IP67

Schematic Sealing (standard) Mounting Hole

AV22PNA62

(Model shown)

● Single pole combined NC/NO momentary action.

● Standard - panel sealing protection per IP65.

● Extremely rugged and durable.

SPECIFICATIONS

Contact ratings: 5 A at 250VAC

Initial contact resistance: 100 milliohms max.

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 2000 V rms min. between terminals

and frame

Electrical life: 1,000,000 cycles min. at 1A 250VAC or

100,000 cycles at full load

Mechanical life: 1,000,000 cycles min.

Operating temperature range: -20°C to +55°C

Panel thickness: .039" (1mm) to .236" (6mm)

● .866" (22 mm) diameter bushing.

MATERIALS

Contacts: Silver/nickel alloy

Bushing: Nickel plated brass Actuator: Anodized aluminum

Case: Polyester, glass filled Hex. Mtg. Nut: Nickel plated brass

22mm Bushing/Actuator configuration Solder lug (2) or quick-connect terminals (4)

New!

Series Bushing Bush./act. Actuator Contact/

diameter config. color terminals

AV 22 PNA

2black 2 solder lug terminals

3green 4 quick-connect terms.

4gray

5yellow

6red

ORDER FORMAT: For

complete model no., fill in

empty boxes with select-

ed options shown below.

Example of complete

model no. -

AV22PNA62

Min. dimensions for matrix

mounting:

1.203" (30.5mm) x 1.203"

(30.5mm).

Complete model no. examples

Black actuator and

solder lug terminals

AV22PNA22

Red actuator and

quick-connect terminals

AV22PNA64

STANDARD STOCK MODEL:

AV22PNA62

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C109

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

.866" (22mm) bushing diameter

(NONE) - no sealing - meets

IP54

Schematic Sealing Mounting Hole

04 curved Act. & Bush.

Min. dimensions for matrix

mounting: 1.181" (30mm) x

1.181" (30mm).

12

MATERIALS

Contacts: Silver

Bushing & Actuator: Nickel plated brass

Case: PBT Hex. Mounting Nut: Nickel plated brass

AV044746A200

(Model shown)

22mm Bushing/Actuator configurations Solder lug/quick-connect terminals (2)

Series Bush./Act. Case Style Function Cont.Matl. Term.Type Bush./Act. Marking* Sealing

Config. Matl.*

AV 04 474 6 A 2 00

(NONE)

K

ORDER FORMAT:

For complete model no.,

fill in empty boxes with

selected options shown

below. Example of

complete model no. -

AV044746A200

K Internal seal &

front panel seals meet IP65

SPECIFICATIONS

Contact ratings: Max. resistive loads; 6 A 125VAC, 3 A

250VAC & 3 A 24 VDC

Initial contact resistance: 10 milliohms max. at 1 A, 2 V

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 3000 V rms min. between terminals

and frame

Electrical life: 50,000 cycles at 1 A 24V, 10,000

cycles at full load

Mechanical life: 100,000 cycles at 0.3 A 24V

Operating temperature range: -20°C to +55°C

Panel thickness: .039" (1mm) to .433" (11mm)

● Double pole alternate action (ON-ON).

● Standard - panel sealing protection per IP54.

● Optional - panel sealing protection per IP65.

● Extremely rugged and durable.

* - see Options page

STANDARD STOCK MODEL:

AV044746A200

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C110

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

.748" (19mm) bushing diameter

Series Bush./Act. Body Term. Cont. Sealing Agency

Config. Style Type Matl. Recognition

Blank - no sealing - meets

IP54 (std'd)

Schematic Sealing Mounting Hole

12

AV19820KMZQUL

(Model shown)

SPECIFICATIONS

Contact ratings: Max. resistive loads: Q - 6 A 125 VAC,

3 A 250 VAC or 7 A 30 VDC.

B - 0.4 Volt-Amps max at 20 V max.

Initial contact resistance: 20 mΩ max. at 3 VDC, 0.1 A

Insulation resistance: 200,000 megohms minimum be-

tween terminals & case ground.

Dielectric strength: 1500 VAC min. between terminals

and case ground.

Electrical life: 60,000 cycles min.

Operating temperature range: -30°C to +85°C

For additional specifications: See 800 Series switches

Min. dimensions for matrix

mounting: .984" (25mm) x

.984" (25mm).

MATERIALS

Contacts: Q - Coin silver for power & UL models. B - Gold over

nickel over brass for dry circuit models.

Bushing & Actuator: Nickel plated brass (std'd)

Case: Diallyl Phthalate Hex. Mounting Nut: Nickel plated brass

● .755" (19 mm) dia. models.

19mm Bushing/Actuator configuration Solder lug terminals - (Z)

K Internal seal &

front panel seals meet

IP65

AV Z

09 810KM B (NONE) (NONE)

19 820KM Q K U L

29

39

49

● SPDT and DPDT with NO & NC momentary action.

● Standard - sealing protection per IP54.

● Optional - sealing protection per IP65.

● Extremely rugged and durable.

09 flat Act. & 19 curved Act. & 29 extended Act. 39 threaded Act. 49 thd'd Act. with Rear view

curved Bushing Bushing (standard) & curved bushing & curved bushing mushroom cap & (820 shown)

curved bushing

ORDER FORMAT:

For complete model no.,

fill in boxes with selected

op-tions shown below.

Example of complete

model no. -

AV19810KMZQKUL

Notes to Order Format:

810KM is SPDT

820KM is DPDT

UL option available only

with Q option. UL rating:

6 A 125 VAC or 3 A

250 VAC (75% power

factor). UL file E66367.

Epoxy terminal seal is

standard on all models.

For mushroom cap (49) only: Add color code at end of above model

number - 0 for natural or 6 for red (consult factory for other colors).

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C111

FEATURES

AV SERIES SECURITY PUSHBUTTON SWITCHES

.748" (19mm) bushing diameter

Series Bush./Act. Body Term. Cont. Term. Sealing Agency

Config. Style Type Matl. Seal Recognition

Blank - no sealing (std'd)

Schematic Sealing Mounting Hole

12

AV19PB1-3P2Y1ZQE

(Model shown)

SPECIFICATIONS

Contact ratings: Max. resistive loads: Q - 6 A 125 VAC,

3 A 250 VAC or 7 A 30 VDC.

B - 0.4 Volt-Amps max at 20 V max.

Initial contact resistance: 5 mΩ max. at 3 VDC, 0.1 A

Insulation resistance: 200,000 megohms minimum be-

tween terminals & case ground.

Dielectric strength: 2000 VAC min. between terminals

and case ground.

Electrical life: 100,000 cycles min.

Operating temperature range: -30°C to +85°C

For additional specifications: See PB Series switches

Min. dimensions for matrix

mounting: .984" (25mm) x

.984" (25mm).

MATERIALS

Contacts: Q - Coin silver for power & UL models. B - Gold over

nickel over brass for dry circuit models.

Bushing & Actuator: Nickel plated brass (std'd)

Case: Diallyl Phthalate Hex. Mounting Nut: Nickel plated brass

● .755" (19 mm) dia. models.

19mm Bushing/Actuator configuration Solder lug terminals - (Z)

Notes to Order Format:

UL option available only

with Q option. UL rating:

6 A 125 VAC or 3 A

250 VAC (75% power

factor). UL file E66367.

E option is epoxy terminal

seal - standard.

K Internal seal &

front panel seals meet

IP65

AV PB13P2Y1 Z E

09 B (NONE) (NONE)

19 Q K U L

29

39

49

● Single pole double throw NO & NC momentary action.

● Standard - sealing protection per IP54.

● Optional - sealing protection per IP65.

● Extremely rugged and durable.

09 flat Act. & 19 curved Act. & 29 extended Act. 39 threaded Act. 49 thd'd Act. with Rear view

curved Bushing Bushing (standard) & curved bushing & curved bushing mushroom cap & all models

curved bushing

ORDER FORMAT:

For com-plete model no., fill

in boxes with selected

options shown below.

Example of complete model

no. -

AV19PB1-3P2Y1ZQEKUL For mushroom cap (49) only: Add color code at end of above model

number - 0 for natural or 6 for red (consult factory for other colors).

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C112

AV SERIES SECURITY PUSHBUTTON SWITCHES

Options - Bushing/Actuator materials and marking

BUSHING/ACTUATOR MATERIAL Replace 00 with one of the following codes.

models with flat or curved metal actuator Code Bushing Actuator

00 (std'd) Nickel plated brass Nickel plated brass

10 Nickel plated brass Stainless steel

12 Nickel plated brass Chrome plated brass

20 Chrome plated brass Chrome plated brass

30 Chrome plated brass Stainless steel

80 Varnished polished brass Varnished polished brass

models with flat thermoplastic actuator Code Bushing Actuator

0X (std'd) Nickel plated brass Nickel plated brass

2X Nickel plated brass Stainless steel

8X Nickel plated brass Chrome plated brass

Replace X above with color: 1 blue, 2 black, 3 green, 4 gray,

5 yellow, 6 red, 7/1 white, 9 orange

Bush./Act. Marking

Matl.

After selecting basic model number from previous

pages of AV Series Security Pushbutton switches,

fill in indicated boxes with desired options below.

New!

MARKING Select an option from each of the two tables. Consult factory for special symbols.

For models with flat actuator only.

Not available on model AV031202C0.

Marking method: by engraving on

metal actuators,(brass only)

by hot stamping on thermoplastic

actuators

MARKING

Code Mark

0 to 9 Numbers 0 to 9

X Symbol

Y Symbol

A to N Letters A to N

P to W Letters P to W

0 Letter O

Letter O: same code and design as

number 0.

✱

#

MARKING COLOR

Code Color

Brass actuator

0 (std'd) Same as finish

2 Black

Note: Code '0' finish cannot be

modified to code '2'.

Thermoplastic actuator

2 Black

7 White

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C113

FEATURES

AV SERIES SNAP-ACTION SECURITY PUSHBUTTON SWITCHES

.748" (19mm) bushing diameter - illumination option

(NONE) - no sealing - meets

IP54

Schematic Sealing Mounting Hole

AVO9C7L3D200 flat actuator, illuminated AV19C703D200 curved actuator, non-illuminated

Min. dimensions for matrix

mounting: 1.181" (30mm) x

1.181" (30mm).

12

MATERIALS

Contacts: Gold plated dome Terminals: Gold plated brass

Bushing & Actuator: Nickel plated brass

Case: PBT Hex. Mounting Nut: Nickel plated brass

AV09C7L3D2006

(Model shown)

19mm Bushing/Actuator configurations Solder lug terminals (2)

Series Bush./Act. Case Style LED Function Contact Terminal Bush./Act. LED Marking* Sealing

Config. mat'l. type mat'l.* color

ORDER FORMAT: For complete model number, fill in empty boxes with selected options shown below.

K Internal seal &

front panel seals meet IP65

SPECIFICATIONS

Contact ratings: 50 mA 24 VDC max. (resistive load)

Initial contact resistance: 100 milliohms max.

Insulation resistance: 1000 megohms min. at 500 VDC

Dielectric strength: 500 V rms min. between terminals

2000 V rms between terminals and bushing

Electrical life: 1000,000 cycles at full load

Mechanical life: 100,000 cycles at 0.3 A 24V

Operating force: 7 N ±2 N

Operating temperature range: -30°C to +70°C

Panel thickness: .039" (1mm) to .433" (11mm)

LED ratings: Two color LED: 2V (3V max.) 20 mA

Other colors: 2V (3V max.) 10 mA

(Series resistor must be added by user)

● Single pole NO momentary action.

● Standard - panel sealing protection per IP54.

● Optional - panel sealing protection per IP65.

● Extremely rugged and durable.

LED COLORS

(NONE) No LED 2 Red/Green 3 Green 5 Yellow 6 Red

AV C7 3 D 2 00

09 L Yes see above (NONE)

19 0 No None, 2, 3, 5 or 6 K

* - see options on next page

Complete model no. examples:

Flat actuator, non-illuminated:

AV09C703D200

Curved actuator, non-illuminated:

(not shown)

AV19C703D200

Flat actuator, illuminated:

AV09C7L3D200

New!

STANDARD STOCK MODELS:

AV09C703D200

AV09C703D200K

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C114

AV SERIES SNAP-ACTION SECURITY PUSHBUTTON SWITCHES

Options - Bushing/Actuator materials and marking

BUSHING/ACTUATOR MATERIAL Replace 00 with one of the following codes.

Non-illuminated models: Code Bushing Actuator

00 (std'd) Nickel plated brass Nickel plated brass

10 Nickel plated brass Stainless steel

30 Chrome plated brass Stainless steel

40 Stainless steel Stainless steel

80 Varnished polished brass Varnished polished brass

Illuminated models: Code Bushing Actuator

00 (std'd) Nickel plated brass Nickel plated brass

20 Chrome plated brass Chrome plated brass

40 Stainless steel Stainless steel

45 Stainless steel Nickel plated brass

80 Varnished polished brass Varnished polished brass

Bush./Act. Marking

Matl.

After selecting basic model number from previous

page of AV Series Snap-action Security Pushbutton

switches, fill in indicated boxes with desired options

below.

New!

MARKING Select an option from each of the two tables. Consult factory for special symbols.

For models with flat actuator only.

Marking method: by engraving on

metal actuators,(brass only)

by hot stamping on thermoplastic

insert (illuminated actuators)

MARKING

Code Mark

0 to 9 Numbers 0 to 9

X Symbol

Y Symbol

A to N Letters A to N

P to W Letters P to W

0 Letter O

Letter O: same code and design as

number 0.

#

MARKING COLOR

Code Color

Non-illuminated actuators

0 (std'd) Same as finish

2 Black

Note: Code '0' finish cannot be

modified to code '2'.

Illuminated actuators

2 Black

(on white)

✱

E

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com C115

FEATURES

AV SERIES SNAP-ACTION SECURITY PUSHBUTTON SWITCHES

WITH REMOVABLE SWITCH BLOCK

New!

SPECIFICATIONS

Contact ratings: 6A 250VAC max.- 10mA 5VAC min.

(resistive loads)

Initial contact resistance: 10 mΩ max. at 1A 4VDC

Insulation resistance: 50 MΩ min. at 500 VDC

Dielectric strength: 750 V rms min. between terminals

5 KV rms between terminals and bushing

Electrical life: 50,000 cycles at full load

Mechanical life: 1,000,000 cycles

Contact gap: .047" (1.2mm)

Operating temperature range: -20°C to +55°C

Panel sealing: IP65 per IEC 529

Panel cut-out: .874" (22.2mm) for AV22

.953" (24.2mm) for AV24

● Single and double poles with alternate action.

● Standard - panel sealing protection per IP65.

● VDE, UL, CSA (CUL) AND BEAB recognized.

● Extremely rugged and durable.

● Switch block easily snaps on or off operator.

MATERIALS

Contacts: Gold plated

Finish: Stainless steel, chrome plated or nickel plated brass or

anodized aluminum

OPTIONS Markings and colors

Stainless steel actuator & bushing

AV22LC40A Single pole

AV22LC40B Double pole

Red anodized actuator, stainless

steel bushing

AV22LC46A Single pole

AV22LC46B Double pole

Stainless steel actuator & bushing

AV24LB40A Single pole

AV24LB40B Double pole

Chrome plated actuator & bushing

AV24LB20A Single pole

AV24LB20B Double pole

Yellow anodized actuator

AV22PNA3A Single pole

AV22PNA3B Double pole

Red anodized actuator

AV22PNA6A Single pole

AV22PNA6B Double pole

Recessed actuator .787" (20mm) dia. , bushing .866" (22mm) dia. arrow indicates o-ring

Curved actuator .787" (20mm) dia. , bushing .945" (24mm) dia. arrow indicates o-ring

Mushroom head actuator 1.181" (30mm) dia. , bushing .866" (22mm) dia. arrow indicates o-ring

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

C

APEM

, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com

C116

AV SERIES SNAP-ACTION SECURITY PUSHBUTTON SWITCHES

WITH REMOVABLE SWITCH BLOCK

New!

PRINTED CIRCUIT BOARD SOCKETS SWITCH BLOCK

A01PC1 Single pole A01PC2 Double pole

OPERATORS (arrow indicates o-ring)

.787" (20mm) recessed actuator .787" (20mm) curved actuator 1.181" (30mm) mushroom hd. actuator

.866" (22mm) bushing .945" (24mm) bushing .866" (22mm) bushing

SCHEMATIC PANEL MOUNTING

Remove switch block from actuator by depressing the latch. Mount opera-

tor on pane with hex nut provided. Wire switch block. Slide wired switch

block onto operator until latch engages.