VDE COMPACT PC BOARD POWER RELAY 28.6 .1.126 JW RELAYS FEATURES 12.8 .504 20.0 .787 mm inch * Miniature package with universal terminal footprint * High dielectric withstanding for transient protection: 10,000 V surge in s between coil and contact * Sealed construction * Class B coil insulation types available * TV rated (TV-5) types available (only for 1 Form A type) * VDE, TUV, SEMKO, SEV, FIMKO, TV-5 also approved SPECIFICATIONS Contact Characteristics Standard type Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity Max. switching Rating power (resistive Max. switching load) voltage Max. switching current Mechanical Expected (at 180 cpm) life (min. Electrical (at 6 cpm) ope.) (Resistive load) High capacity type 1 Form A, 1 Form C, 1 Form A, 1 Form C 2 Form A, 2 Form C 100 m Silver alloy 5 A 250 V AC, 10 A 250 V AC, 5 A 30 V DC 10 A 30 V DC 1,250 VA, 150 W 2,500 VA, 300 W 250 V AC, 30 V DC 5A 10 A 5x106 105 Coil Nominal operating power 530 mW Remarks * Specifications will vary with foreign standards certification ratings. *1 Detection current: 10mA *2 Wave is standard shock voltage of 1.2 x 50s according to JEC-212-1981 *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10s *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10s *7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). *8 When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1C 33.8F with 20C 68F as a reference) and use a coil impressed voltage that is within the maximum allowable voltage range. Standard type High capacity type Max. operating speed (at 6 cpm rated load) Initial insulation resistance Min. 1,000 M at 500 V DC 1,000 Vrms for 1 min. Between open contacts Initial 5,000 Vrms for 1 min. breakdown Between contacts and coil voltage*1 Between contact sets 3,000 Vrms for 1 min. (2 Form A, 2 Form C) Initial surge voltage between Min. 10,000 V contacts and coil*2 Operate time*3 Max. 15 ms (at nominal voltage) 3 Release time (without diode)* Max. 5 ms (at nominal voltage) Temperature rise (at 20C) 1a: max. 39C 1a: max. 45C (at nominal voltage) 1c: max. 55C 1c, 2a, 2c: max. 55C (with nominal coil voltage and at (resistance method) (resistance method) nominal switching capacity) Functional*4 Min. 98 m/s2 {10 G} Shock resistance Destructive*5 Min. 980 m/s2 {100 G} Approx. 98 m/s2 {10 G}, 10 to 55 Hz at Functional*6 double amplitude of 1.6 mm Vibration resistance Approx. 117.6 m/s2 {12 G}, 10 to 55 Hz Destructive at double amplitude of 2.0 mm Conditions for operation, Ambient -40C to +85C -40F to +185F transport and storage*7 temp.*8 (Not freezing and condensHumidity 5 to 85% R.H. ing at low temperature) Unit weight Approx. 13 g .46 oz TYPICAL APPLICATIONS 1. Home appliances TV sets, VCR, Microwave ovens 2. Office machines Photocopiers, Vending machines 3. Industrial equipment NC machines, Robots, Temperature controllers 85 JW ORDERING INFORMATION Ex. JW Contact arrangement 1 F Contact capacity S N B Protective construction DC5V Pick-up voltage 1: 1 Form C Nil: Standard (5 A) S: Sealed type N: 70% of nominal 1a: 1 Form A F: High capacity voltage 2: 2 Form C (10 A)* 2a: 2 Form A *Only for 1 Form A and 1 Form C type UL/CSA, VDE, SEMKO, FIMKO, SEV approved type is standard. Notes: 1. When ordering TV rated (TV-5) types, add suffix-TV (available only for 1 Form A type). 2. Standard packing: Carton: 100 pcs. Case: 500 pcs. Coil insulation class Coil voltage Nil: Class E insulation B: Class B insulation DC 5, 6, 9, 12, 18, 24, 48 V TYPES Standard (5A) types Contact arrangement 1 Form A 1 Form C Coil voltage, V DC 5 6 9 12 18 24 48 5 6 9 12 18 24 48 Part No. JW1aSN-DC5V JW1aSN-DC6V JW1aSN-DC9V JW1aSN-DC12V JW1aSN-DC18V JW1aSN-DC24V JW1aSN-DC48V JW1SN-DC5V JW1SN-DC6V JW1SN-DC9V JW1SN-DC12V JW1SN-DC18V JW1SN-DC24V JW1SN-DC48V Contact arrangement Part No. JW1aFSN-DC5V JW1aFSN-DC6V JW1aFSN-DC9V JW1aFSN-DC12V JW1aFSN-DC18V JW1aFSN-DC24V JW1aFSN-DC48V Contact arrangement 2 Form A 2 Form C Coil voltage, V DC 5 6 9 12 18 24 48 5 6 9 12 18 24 48 Part No. JW2aSN-DC5V JW2aSN-DC6V JW2aSN-DC9V JW2aSN-DC12V JW2aSN-DC18V JW2aSN-DC24V JW2aSN-DC48V JW2SN-DC5V JW2SN-DC6V JW2SN-DC9V JW2SN-DC12V JW2SN-DC18V JW2SN-DC24V JW2SN-DC48V Coil voltage, V DC 5 6 9 12 18 24 48 Part No. JW1FSN-DC5V JW1FSN-DC6V JW1FSN-DC9V JW1FSN-DC12V JW1FSN-DC18V JW1FSN-DC24V JW1FSN-DC48V High capacity (10 A) types Contact arrangement 1 Form A Coil voltage, V DC 5 6 9 12 18 24 48 1 Form C COIL DATA (at 20C 68F) Nominal voltage, V DC Pick-up voltage, V DC (max.) (Initial) Drop-out voltage, V DC (min.) (Initial) Nominal operating current, mA (10%) 5 6 9 12 18 24 48 3.5 4.2 6.3 8.4 12.6 16.8 33.6 0.5 0.6 0.9 1.2 1.8 2.4 4.8 106 88 58 44 29 22 11 86 Coil resistance, (10%) 47 68 155 270 611 1,100 4,400 Nominal operating power, mW Max. allowable voltage 130% V of Nominal Voltage (at 60C 140F) 530 120% V of Nominal Voltage (at 85C 185F) JW DIMENSIONS mm inch 1 Form A 20 .787 0.4 .016 2.4 .094 3.5 .138 0.5 3.6 .020 .142 0.3 .012 1.1 .043 12.8 .504 7.6 .299 0.4 .016 7.6 .299 4-1.3 dia. 4-.051 dia. Relay outline 0.3 .012 Tolerance: 0.1 .004 2.4 .094 2.4 .094 Wiring diagram (Bottom view) 20 .787 2.4 .094 3.5 3.5 .138 .138 16.5 .650 COM 5-1.3 dia. 5-.051 dia. 7.6 .299 3.6 0.5 .020 .142 0.3 .012 0.5 .020 Relay outline Tolerance: 0.1 .004 1.1 .043 Wiring diagram (Bottom view) 3.5 .138 3.5 .138 28.6 1.128 16.5 .650 N.O. 3.5 .138 28.6 1.126 20 .787 PC board pattern (Copper-side view) 20 .787 12.8 .504 0.3 .012 1 Form C PC board pattern (Copper-side view) N.O. COM N.C. Stand-off COIL COIL 0.9 .035 Dimension : Max. 1mm .039 inch 1 to 3mm .039 to .118 inch Min. 3mm .118 inch 0.8 .031 General tolerance 0.1 .004 0.2 .008 0.3 .012 7.6 .299 12.8 .504 2 Form C 2 Form A PC board pattern (Copper-side view) 0.4 .016 0.3 .012 0.3 .012 1.3 .051 0.5 .020 20 .787 1.3 .051 5 .197 20 .787 PC board pattern (Copper-side view) 0.4 .016 6-1.3 dia. 6-.051 dia. 7.5 .295 3.6 .142 Tolerance: 0.1 .004 1.1 .043 Wiring diagram (Bottom view) 5 .197 COM 28.6 1.128 20 .787 6-1.3 dia. 6-.051 dia. 7.5 .295 Tolerance: 0.1 .004 N.O. COM N.C. COIL 0.8 .031 Dimension : Max. 1mm .039 inch 1 to 3mm .039 to .118 inch Min. 3mm .118 inch 15 .591 Wiring diagram (Bottom view) COIL 0.8 .031 7.5 .299 12.8 .504 5 5 .197 .197 Relay outline 5 .197 5 .197 28.6 1.128 15 .591 N.O. 1.3 .051 0.5 3.6 .020 .142 0.3 .012 0.5 .020 0.3 .012 1.1 1.3 .043 .051 Relay outline 20 .787 7.5 .295 12.8 .504 General tolerance 0.1 .004 0.2 .008 0.3 .012 REFERENCE DATA 1-(1). Maximum operating power 1-(2). Maximum operating power 2-(1). Life curve 1 Form A Standard (5 A) type 1 Form A High Capacity (10 A) type 1 Form A Standard (5 A) type 100 10 1 DC resistive load 10 AC resistive load 100 Contact voltage, V 100 10 1 1,000 Life, x104 Contact current, A Contact current, A 100 DC resistive load 10 AC resistive load 100 Contact voltage, V 250 V AC resistive load (cos =1.0) 30 V DC resistive load 10 1,000 5 10 15 Contact current, A 87 JW 2-(2). Life curve 3-(1). Operate/release time 3-(2). Operate/release time 1 Form A High Capacity (10 A) type Sample: JW1aSN-DC12V, 10 pcs. Ambient temperature: 20C 68F Sample: JW1aFSN-DC12V, 10 pcs. Ambient temperature: 20C 68F 250 V AC resistive load (cos =1.0) 30 V DC resistive load 10 10 Operate time Max. xMin. 5 Release time 5 10 0 15 80 90 100 Operate/release time, ms Life, x104 100 Operate/release time, ms 10 Operate time Max. xMin. 5 Release time Max. xMin. 110 0 120 80 Coil applied voltage, %V Contact current, A 90 100 3-(3). Operate/release time 3-(4). Operate/release time 3-(5). Operate/release time Sample: JW2aSN-DC24V, 6 pcs. Ambient temperature: 20C 68F Sample: JW2SN-DC12V, 6 pcs. Ambient temperature: 20C 68F 9 8 7 6 Max. xMin. Max. x-x Min. 5 4 3 2 1 80 90 100 110 120 14 9 13 8 12 Operate time 10 Max. xMin. 8 6 4 Release time 130 80 Coil applied voltage, %V 90 100 110 4-(2). Coil temperature rise (Contact carrying current: 10 A) Sample JW1aFSN-DC12V, 6 pcs. Point measured: Inside the coil Sample: JW1aFSN-DC12V, 6 pcs. Point measured: Inside the coil 40 30 Temperature rise, C Temperature rise, C 60C 85C 50 40 30 10 10 100 120 140 Coil applied voltage, %V 160 60C 85C 50 20 0 100 120 140 Coil applied voltage, %V 120 7 Operate time 6 Max. xMin. 5 4 Release time 3 Max. xMin. 2 1 0 80 90 100 110 120 130 Coil applied voltage, %V 25C 60 20 0 88 70 25C 60 120 Coil applied voltage, %V 4-(1). Coil temperature rise (Contact carrying current: 5A) 70 Max. xMin. 2 Operate/release time, ms 10 Operate/release time, ms Operate/release time, ms 11 110 Coil applied voltage, %V Sample: JW1SN-DC12V, 6 pcs. Ambient temperature: 20C 68F 13 12 Max. xMin. 160 JW ACCESSORIES FEATURES 1. Space saving design 2. Wiring can be done with ease (DIN terminal) For 1 poles DIN terminal Socket For 2 poles N.C. contact raw N.C. contact raw N.O. contact raw N.O. contact raw COM contact raw COM contact raw Coil terminal raw Coil terminal raw TYPES Product name Number of poles Part No. 1 JW1-SFD 2 JW2-SFD 1 2 1 2 JW1-PS JW2-PS JW1-SS JW2-SS JW1 DIN terminal socket (with hold-down clip) JW2 DIN terminal socket (with hold-down clip) JW1 PC board socket JW2 PC board socket JW1 Plug-in socket JW2 Plug-in socket Applicable relay type 1 Form C 2 Form A 1 Form A * 2 Form C Standard packing Inner carton Outer case * * * * * * * 10 pcs. * * * * 100 pcs. SPECIFICATIONS PC board socket/Plug-in socket 1 pole 2 poles 1,500 vrms for 1 minute Min. 100 M Type Item Breakdown voltage Insulation resistance DIMENSIONS 1. DIN terminal socket mm inch 2. PC board socket PC board pattern (Bottom view) 20.60.6 .811.024 7.50.2 .295.008 1 8 3 6 50.3 .197.012 DIN terminal socket 1 pole 2 poles 1,500 Vrms for 1 minute 1,000 Vrms for 1 minute Min. 100 M 130.6 .512.024 671 2.638.039 6.5 dia. .256 dia. 6.5 .256 5-1.3 dia. 5-.051 dia. 320.6 1.260.024 35.40.5 1.394.020 7.6 .299 (4.4) (.173) 150.3 .591.012 50.3 .197.012 4.30.3 .169.012 3.5 .138 3.5 dia. .138 dia. 5 7 4 2 30.3 .118.012 1 Form A 1 Form C 0.80.1 .031.004 210.6 .827.024 28.50.6 1.122.024 21.50.6 .846.024 6.70.3 .264.012 40.6 .157.024 Pre-soldering 16.5 .650 3.5 .138 3.5 .138 2 Form A 2 Form C 0.30.1 .012.004 0.350.1 .014.004 8-1.3 dia. 8-.051 dia. 7.5 .295 (4) (.157) 15 5 5 .591 .197 .197 Tolerance: 0.1 .004 3. Plug-in socket Panel cut-out (Thickness: 1.0 to 2.0 .039 to .079) 130.6 .512.024 370.6 1.457.024 10.3 .039.012 36.40.6 1.433.024 25.40.6 1.000.024 34.9 1.374 11.9 .469 Tolerance: 0.1 .004 20.3 .079.012 20.3 .079.012 8.60.3 .339.012 80.6 .315.024 1.90.3 .075.012 Details of terminal portion For Cautions for Use, see Relay Technical Information (Page 11 to 39). 12/27/2002 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. 89 Go To Online Catalog