© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 1
One world. One KEMET
Ordering Information
C1210 C332 J C G A C TU
Ceramic Case Size
(L" x W")
Specication/
Series Capacitance
Code (pF) Capacitance
Tolerance1Voltage Dielectric Failure Rate/
Design Termination Finish2Packaging/Grade
(C-Spec)3
0805
1206
1210
1808
1812
1825
2220
2225
C = Standard 2 Signicant Digits
+ Number of Zeros
Use 9 for
1.0 – 9.9 pF
Use 8 for
0.5 – .99 pF
ex. 2.2 pF = 229
ex. 0.5 pF = 508
B = ±0.10 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
C = 500 V
B = 630 V
D = 1,000 V
F = 1,500 V
G = 2,000 V
Z = 2,500 V
H = 3,000 V
G = C0G A = N/A C = 100% Matte Sn
L = SnPb (5%
minimum)
Blank = Bulk
TU = 7" Reel
Unmarked
AUTO =
Automotive Grade
7"Reel Unmarked
1 Additional capacitance tolerance offerings may be available. Contact KEMET for details.
2 SnPb termination nish option is not available on Automotive Grade product.
2, 3 Additional termination nish options may be available. Contact KEMET for details.
3 Additional reeling or packaging options may be available. Contact KEMET for details.
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC
(Commercial & Automotive Grade)
Overview
KEMET’s high voltage surface mount MLCCs in C0G dielectric
feature a 125°C maximum operating temperature and are
considered “stable.” The Electronics Industries Alliance (EIA)
characterizes C0G dielectric as a Class I material. Components
of this classication are temperature compensating and are
suited for resonant circuit applications or those where Q and
stability of capacitance characteristics are required. C0G
exhibits no change in capacitance with respect to time and
voltage and boasts a negligible change in capacitance with
reference to ambient temperature. Capacitance change is
limited to ±30ppm/ºC from -55°C to +125°C.
These devices exhibit low ESR at high frequencies and nd
conventional use as snubbers or lters in applications such as
switching power supplies and lighting ballasts. Their exceptional
performance at high frequencies has made high voltage MLCC's
the preferred dielectric choice of design engineers worldwide.
In addition to their use in power supplies, these capacitors
are widely used in industries related to automotive(hybrid),
telecommunications, medical, military, aerospace, semiconductors
and test/diagnostic equipment.
Automotive Grade is available for applications requiring proven,
reliable performance in harsh environments. Whether under-hood
or in-cabin, these capacitors are designed for mission and safety
critical automotive circuits. Stricter testing protocol and inspection
criteria have been established for automotive grade products
in recognition of potentially harsh environmental conditions.
KEMET automotive grade series capacitors meet the demanding
Automotive Electronics Council's AEC–Q200 qualication
requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Dimensions – Millimeters (Inches)
Ceramic Surface Mount
WL
TB
S
100% Tin or SnPb Plate
Nickel Plate
Conductive Metalization
Electrodes
EIA
Size
Code
Metric
Size
Code
L
Length W
Width T
Thickness B
Bandwidth
S
Separation
Minimum
Mounting
Technique
0805 2012 2.00 (.079) ±0.20 (.008) 1.25 (.049) ±0.20 (.008)
See Table 2 for
Thickness
0.50 (0.02) ±0.25 (.010) 0.75 (.030) Solder Wave or
Solder Reow
1206 3216 3.20 (.126) ±0.20 (.008) 1.60 (.063) ±0.20 (.008) 0.50 (0.02) ±0.25 (.010)
N/A
1210 3225 3.20 (.126) ±0.20 (.008) 2.50 (.098) ±0.20 (.008) 0.50 (0.02) ±0.25 (.010)
Solder Reow Only
1808 4520 4.70 (.185) ±0.50 (.020) 2.00 (.079) ±0.20 (.008) 0.60 (.024) ±0.35 (.014)
1812 4532 4.50 (.177) ±0.30 (.012) 3.20 (.126) ±0.30 (.012) 0.60 (.024) ±0.35 (.014)
1825 4564 4.50 (.177) ±0.30 (.012) 6.40 (.252) ±0.40 (.016) 0.60 (.024) ±0.35 (.014)
2220 5650 5.70 (.224) ±0.40 (.016) 5.00 (.197) ±0.40 (.016) 0.60 (.024) ±0.35 (.014)
2225 5664 5.60 (.220) ±0.40 (.016) 6.40 (.248) ±0.40 (.016) 0.60 (.024) ±0.35 (.014)
Benets
-55°C to +125°C operating temperature range
RoHS Compliant
EIA 0805, 1206, 1210, 1808, 1812, 1825, 2220, and
2225 case sizes
DC voltage ratings of 500 V, 630 V,1 KV, 1.5 KV, 2 KV,
2.5 KV, and 3 KV
Capacitance offerings ranging from 1 pF to 0.01 μF
Available capacitance tolerances of ±0.10 pF, ±0.25 pF,
±0.5 pF, ±1%, ±2%, ±5%, ±10%, and ±20%
No piezoelectric noise
Extremely low ESR and ESL
High thermal stability
High ripple current capability
Preferred capacitance solution at line frequencies & into the
MHz range
No capacitance change with respect to applied rated DC voltage
Negligible capacitance change with respect to temperature from
-55°C to +125°C
No capacitance decay with time
Non-polar device, minimizing installation concerns
Commercial & Automotive (AEC-Q200) grades available
100% pure matte tin-plated termination nish allowing for
excellent solderability
SnPb plated termination nish option available upon request (5%
minimum)
Applications
Typical applications include switch mode power supplies (input lters, resonators, tank circuits, snubbed circuits, output lters), high
voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling capacitors in Ćuk
converters. Markets include power supply, LCD uorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical
equipment/control, LAN/WAN interface, analog and digital modems, and automotive.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Qualication/Certication
Commercial Grade products are subject to internal qualication. Details regarding test methods and conditions are referenced in
Table 4, Performance & Reliability.
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test
methods and conditions are referenced in document AEC–Q200, Stress Test Qualication for Passive Components. For additional
information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com.
Environmental Compliance
RoHS Compliant (excluding SnPb termination nish option).
Electrical Parameters/Characteristics
Item Parameters/Characteristics
Operating Temperature Range -55°C to +125°C
Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC) ±30 ppmC
Aging Rate (Maximum % Capacitance Loss/Decade Hour) 0%
Dielectric Withstanding Voltage (DWV) 150% of rated voltage for voltage rating of < 1,000 V
120% of rated voltage for voltage rating of ≥ 1,000 V
(5 ±1 seconds and charge/discharge not exceeding 50 mA)
Dissipation Factor (DF) Maximum Limit @ 25ºC 0.1%
Insulation Resistance (IR) Limit @ 25°C 1,000 megohm microfarads or 100 GΩ
(Rated voltage applied for 120 ±5 seconds @ 25°C)
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 Vrms ±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50 Hz and 1.0 Vrms ±0.2 V if capacitance > 1,000 pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Dielectric Rated DC
Voltage Capacitance
Value Dissipation Factor
(Maximum %) Capacitance
Shift Insulation
Resistance
C0G All All 0.5 0.3% or ±0.25 pF 10% of Initial Limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Capacitance Cap
Code
Series C0805 C1206 C1210 C1808
Voltage Code C B D C B D F G C B D F G C B D F G Z H
Voltage DC
500
630
1000
500
630
1000
1500
2000
500
630
1000
1500
2000
500
630
1000
1500
2000
2500
3000
Capacitance
Tolerance
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
1.0 – 1.6 pF 109 – 169 B CDK M DG DG DG LB LB LB LB LB LB LB
1.8 – 4.3 pF 189 – 439 B CDJ K M DG DG DG LB LB LB LB LB LB LB
4.7 – 9.1 pF 479 BCD G J K M DG DG DG LB LB LB LB LB LB LB
10 pF 100 BCD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
11 pF 110 BCD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
12 pF 120 BCD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
13 pF 130 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
15 pF 150 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
16 pF 160 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
18 pF 180 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
20 pF 200 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
22 pF 220 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
24 pF 240 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
27 pF 270 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
30 pF 300 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
33 pF 330 CD F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
36 pF 360 D F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
39 pF 390 D F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
43 pF 430 D F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
47 pF 470 D F G J K M DG DG DG EG EG EG EG EG FM FM FM FM FM LB LB LB LB LB LB LB
51 pF 510 D F G J K M DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB
56 pF 560 D F G J K M DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB
62 pF 620 D F G J K M DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB
68 pF 680 F G J K M DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB
75 pF 750 F G J K M DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB
82 pF 820 F G J K M DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB
91 pF 910 F G J K M DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LB LB
100 pF 101 F G J K M DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LC LB
110 pF 111 F G J K M DG DG DG EF EF EF EG EG FM FM FM FM FM LB LB LB LB LB LC LB
120 pF 121 F G J K M DG DG DG EF EF EF EG EG FG FG FG FM FM LA LA LA LA LB LC LB
130 pF 131 F G J K M DG EF EF EF EG EG FG FG FG FM FM LA LA LA LA LB LC
150 pF 151 F G J K M DG EF EF EF EG EG FG FG FG FM FM LA LA LA LA LB LC
160 pF 161 F G J K M DG EF EF EF EG EG FG FG FG FM FM LA LA LA LA LC LC
180 pF 181 F G J K M DG EF EF EF EG EG FG FG FG FM FM LA LA LA LA LC LC
200 pF 201 F G J K M DG EF EG EG EG FG FG FG FM FM LA LA LA LA LC LC
220 pF 221 F G J K M DG EF EG EG EG FG FG FG FM FM LA LA LA LA LC LC
240 pF 241 F G J K M DG EF EG EG EG FG FG FG FM FM LA LA LA LB LC LC
270 pF 271 F G J K M EF EG EG EG FG FG FG FK FK LA LA LA LB LC LC
300 pF 301 F G J K M EF EG EG EG FG FG FG FK FK LA LA LA LB LC LC
330 pF 331 F G J K M EF EG EG EG FG FG FG FK FK LA LA LA LB LC LC
360 pF 361 F G J K M EG EG EG EG FG FG FG FK FS LA LA LA LB
390 pF 391 FGJ K M EG EG EG EG FG FG FG FK FS LA LA LA LB
430 pF 431 F G J K M EG EG EG FG FM FM FS FS LA LB LB LC
470 pF 471 F G J K M EG EG EG FG FM FM FS FS LA LB LB LC
510 pF 511 F G J K M EG EG EG FG FM FM FS LA LB LB LC
560 pF 561 F G J K M EG EG EG FG FM FM FS LA LB LB LC
620 pF 621 F G J K M EG EG EG FG FM FM FS LA LB LB
680 pF 681 F G J K M EG EG EG FG FM FM FS LB LB LB
750 pF 751 F G J K M EG FG FM FM LB LB LB
820 pF 821 F G J K M EG EF¹ FG FM FM LB LB LB
910 pF 911 F G J K M EG FM FM FM LB LB LB
Capacitance Cap
Code
Voltage VDC
500
630
1000
500
630
1000
1500
2000
500
630
1000
1500
2000
500
630
1000
1500
2000
2500
3000
Voltage Code C B D C B D F G C B D F G C B D F G Z H
Series C0805 C1206 C1210 C1808
Table 1A – Capacitance Range/Selection Waterfall (0805 – 1808 Case Sizes)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within
the same form factor (conguration and dimensions).
These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts.
xx1 Commercial products only.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 5
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Capacitance Cap
Code
Series C0805 C1206 C1210 C1808
Voltage Code C B D C B D F G C B D F G C B D F G Z H
Voltage DC
500
630
1000
500
630
1000
1500
2000
500
630
1000
1500
2000
500
630
1000
1500
2000
2500
3000
Capacitance
Tolerance
Product Availability and Chip Thickness Codes
See Table 2 for Chip Thickness Dimensions
1,000 pF 102 F G J K M EG EF¹ FM FM FM LB LB LB
1,100 pF 112 F G J K M FM FK FK LC LC LC
1,200 pF 122 F G J K M FM FK FK LC LC LC
1,300 pF 132 F G J K M FM FS FS LC LC LC
1,500 pF 152 F G J K M FK FS FS LC LC LC
1,600 pF 162 F G J K M FK FS FS LC LC LC
1,800 pF 182 F G J K M FK FS FS LC LC LC
2,000 pF 202 F G J K M FK LC
2,200 pF 222 F G J K M FK LC
3,000 pF 302 F G J K M FS
3,300 pF 332 F G J K M FS
Capacitance Cap
Code
Voltage VDC
500
630
1000
500
630
1000
1500
2000
500
630
1000
1500
2000
500
630
1000
1500
2000
2500
3000
Voltage Code C B D C B D F G C B D F G C B D F G Z H
Series C0805 C1206 C1210 C1808
Table 1A – Capacitance Range/Selection Waterfall (0805 – 1808 Case Sizes) cont'd
Table 1B – Capacitance Range/Selection Waterfall (1812 – 2225 Case Sizes)
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within
the same form factor (conguration and dimensions).
These products are protected under US Patents 7,172,985 & 7,670,981, other patents pending, and any foreign counterparts.
xx1 Commercial products only.
Capacitance Cap
Code
Series C1812 C1825 C2220 C2225
Voltage Code C B D F G Z H C B D F G Z H C B D F G Z H C B D F G Z H
Voltage DC
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
Capacitance Tolerance
Product Availability and Chip Thickness Codes – See Table 2 for Chip Thickness Dimensions
10 pF 100 BCD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
11 pF 110 BCD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
12 pF 120 BCD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
13 pF 130 CD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
15 pF 150 CD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
16 pF 160 CD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
18 pF 180 CD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
20 pF 200 CD F G JK M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
22 pF 220 CD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
24 pF 240 CD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
27 pF 270 CD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
30 pF 300 CD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
33 pF 330 CD F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
36 pF 360 D F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
39 pF 390 D F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
43 pF 430 D F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
47 pF 470 D F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
51 pF 510 D F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
56 pF 560 D F G J K MGK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
62 pF 620 D F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
68 pF 680 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
75 pF 750 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
82 pF 820 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
91 pF 910 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
Capacitance Cap
Code
Voltage DC
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
Voltage Code C B D F G Z H C B D F G Z H C B D F G Z H C B D F G Z H
Series C1812 C1825 C2220 C2225
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 6
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Capacitance Cap
Code
Series C1812 C1825 C2220 C2225
Voltage Code C B D F G Z H C B D F G Z H C B D F G Z H C B D F G Z H
Voltage DC
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
Capacitance Tolerance
100 pF 101 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
110 pF 111 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
120 pF 121 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
130 pF 131 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
150 pF 151 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
160 pF 161 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
180 pF 181 F G J K M GK GK GK GK GK GK GK HG HG HG HG HG HG HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
200 pF 201 F G J K M GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
220 pF 221 F G J K M GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KF KF KF KF KF KF KF
240 pF 241 F G J K M GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KE KE KE KE KE KE KF
270 pF 271 F G J K M GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KE KE KE KE KE KE KF
300 pF 301 F G J K M GH GH GH GH GH GK HE HE HE HE HE HE HG JP JP JP JP JP JP JP KE KE KE KE KE KE KF
330 pF 331 F G J K M GH GH GH GH GH GK HE HE HE HE HE HE HG JE JE JE JE JE JP JP KE KE KE KE KE KE KF
360 pF 361 F G J K M GK GK GK GK GH GK HE HE HE HE HE HE HG JE JE JE JE JE JP JP KE KE KE KE KE KE KF
390 pF 391 F G J K M GK GK GK GK GK GK HE HE HE HE HE HE HG JE JE JE JE JE JP JP KE KE KE KE KE KE KF
430 pF 431 F G J K M GK GK GK GK GK GK HE HE HE HE HE HE JE JE JE JE JE JP KE KE KE KE KE KE KF
470 pF 471 F G J K M GK GK GK GK GK GK HE HE HE HE HE HE JE JE JE JE JE JP KF KF KF KF KE KE KF
510 pF 511 F G J K M GH GH GH GK HE HE HE HE HE HE JP JP JP JP JP JP KF KF KF KF KE KE KF
560 pF 561 F G J K M GH GH GH GK HE HE HE HE HG HE JP JP JP JP JP JP KF KF KF KF KE KE KF
620 pF 621 F G J K M GH GH GH GK HE HE HE HE HG HE JP JP JP JP JP JP KF KF KF KF KE KF
680 pF 681 F G J K M GH GH GH GK HE HE HE HE HG HG JE JE JE JP JP JP KF KF KF KF KE KF
750 pF 751 F G J K M GH GH GH GK HE HE HE HG HG HG JE JE JE JP JP JP KE KE KE KF KE KF
820 pF 821 F G J K M GH GH GH GK HE HE HE HG HG HG JE JE JE JP JP JP KE KE KE KF KE KF
910 pF 911 F G J K M GH GH GH HE HE HE HG HG HG JE JP JP JP JP JP KE KE KE KF KE KF
1,000 pF 102 F G J K M GH GH GH HE HE HE HG HG HG JE JP JP JP JP JP KE KE KE KF KE KF
1,100 pF 112 F G J K M GH GK GK HE HE HE HG HG JE JP JP JP JP KE KE KE KF KF KF
1,200 pF 122 F G J K M GH GK GK HE HE HE HG HG JE JP JP JP JP KE KE KE KF KF KF
1,300 pF 132 F G J K M GH GK GK HE HE HE HG JE JP JP JP KE KE KE KF KF
1,500 pF 152 F G J K M GK GK GK HE HE HE HG JE JP JP JP KE KE KE KF KF
1,600 pF 162 F G J K M GK GK GK HE HG HG HG JE JP JP JP KE KE KE KF
1,800 pF 182 F G J K MGK GK GK HE HG HG HG JE JP JP JP KE KE KE KF
2,000 pF 202 F G J K M GK GK GK HE HG HG JE JP JP KE KE KE KF
2,200 pF 222 F G J K M GK GK GK HE HG HG JE JP JP KE KE KE KF
2,400 pF 242 F G J K M GK HE HG HG JP JP JP KE KE KE
2,700 pF 272 F G J K M GK HE HG HG JP JP JP KE KE KE
3,000 pF 302 F G J K M GK HG HG HG JP JP JP KE KE KE
3,300 pF 332 F G J K M GK HG HG HG JP JP JP KE KE KE
3,600 pF 362 F G J K M GK HG HG HG JP JP JP KE KF KF
3,900 pF 392 F G J K M GK HG HG HG JP JP JP KE KF KF
4,300 pF 432 F G J K M HG HG HG JP JP JP KE KF KF
4,700 pF 472 F G J K M HG HG HG JP JP JP KE KF KF
5,100 pF 512 F G J K M HG JP JP JP KE KF KF
5,600 pF 562 F G J K M HG JP JP JP KE KF KF
6,200 pF 622 F G J K M HG JP KE KF KF
6,800 pF 682 F G J K M HG JP KE KF KF
7,500 pF 752 F G J K M HG JP KF
8,200 pF 822 F G J K M HG JP KF
9,100 pF 912 F G J K MKF
10,000 pF 103 F G J K M KF
Capacitance Cap
Code
Voltage DC
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
500
630
1000
1500
2000
2500
3000
Voltage Code C B D F G Z H C B D F G Z H C B D F G Z H C B D F G Z H
Series C1812 C1825 C2220 C2225
Table 1B – Capacitance Range/Selection Waterfall (1812 – 2225 Case Sizes) cont'd
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within
the same form factor (conguration and dimensions).
These products are protected under US Patents 7,172,985 & 7,670,981, other patents pending, and any foreign counterparts.
xx1 Commercial products only.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 7
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Table 2 – Chip Thickness/Packaging Quantities
Thickness
Code Case
Size Thickness ±
Range (mm) Paper Quantity Plastic Quantity
7" Reel 13" Reel 7" Reel 13" Reel
DG
0805
1.25 ± 0.15
0
0
2,500
10,000
EF
1206
1.20 ± 0.15
0
0
2,500
10,000
EG
1206
1.60 ± 0.15
0
0
2,000
8,000
FG
1210
1.25 ± 0.15
0
0
2,500
10,000
FM
1210
1.70 ± 0.20
0
0
2,000
8,000
FK
1210
2.10 ± 0.20
0
0
2,000
8,000
FS
1210
2.50 ± 0.20
0
0
1,000
4,000
LA
1808
1.40 ± 0.15
0
0
1,000
4,000
LB
1808
1.60 ± 0.15
0
0
1,000
4,000
LC
1808
2.00 ± 0.15
0
0
1,000
4,000
GH
1812
1.40 ± 0.15
0
0
1,000
4,000
GK
1812
1.60 ± 0.20
0
0
1,000
4,000
HE
1825
1.40 ± 0.15
0
0
1,000
4,000
HG
1825
1.60 ± 0.20
0
0
1,000
4,000
JE
2220
1.40 ± 0.15
0
0
1,000
4,000
JP
2220
1.60 ± 0.20
0
0
1,000
4,000
KE
2225
1.40 ± 0.15
0
0
1,000
4,000
KF
2225
1.60 ± 0.20
0
0
1,000
4,000
Thickness
Code Case
Size Thickness ±
Range (mm)
7" Reel 13" Reel 7" Reel 13" Reel
Paper Quantity Plastic Quantity
Package quantity based on nished chip thickness specications.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 8
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Table 3 – Chip Capacitor Land Pattern Design Recommendations per IPC–7351
EIA
Size
Code
Metric
Size
Code
Density Level A:
Maximum (Most)
Land Protrusion (mm)
Density Level B:
Median (Nominal)
Land Protrusion (mm)
Density Level C:
Minimum (Least)
Land Protrusion (mm)
C Y X V1 V2 C Y X V1 V2 C Y X V1 V2
01005 0402 0.33 0.46 0.43 1.60 0.90 0.28 0.36 0.33 1.30 0.70 0.23 0.26 0.23 1.00 0.50
0201 0603 0.38 0.56 0.52 1.80 1.00 0.33 0.46 0.42 1.50 0.80 0.28 0.36 0.32 1.20 0.60
0402 1005 0.50 0.72 0.72 2.20 1.20 0.45 0.62 0.62 1.90 1.00 0.40 0.52 0.52 1.60 0.80
0603 1608 0.90 1.15 1.10 4.00 2.10 0.80 0.95 1.00 3.10 1.50 0.60 0.75 0.90 2.40 1.20
0805 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.00 0.75 0.95 1.35 2.80 1.70
1206 3216 1.60 1.35 1.90 5.60 2.90 1.50 1.15 1.80 4.70 2.30 1.40 0.95 1.70 4.00 2.00
1210 3225 1.60 1.35 2.80 5.65 3.80 1.50 1.15 2.70 4.70 3.20 1.40 0.95 2.60 4.00 2.90
1808 4520 2.30 1.75 2.30 7.40 3.30 2.20 1.55 2.20 6.50 2.70 2.10 1.35 2.10 5.80 2.40
1812 4532 2.15 1.60 3.60 6.90 4.60 2.05 1.40 3.50 6.00 4.00 1.95 1.20 3.40 5.30 3.70
1825 4564 2.15 1.60 6.90 6.90 7.90 2.05 1.40 6.80 6.00 7.30 1.95 1.20 6.70 5.30 7.00
2220 5650 2.75 1.70 5.50 8.20 6.50 2.65 1.50 5.40 7.30 5.90 2.55 1.30 5.30 6.60 5.60
2225 5664 2.70 1.70 6.90 8.10 7.90 2.60 1.50 6.80 7.20 7.30 2.50 1.30 6.70 6.50 7.00
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow solder
processes. KEMET only recommends wave soldering of EIA 0603, 0805 and 1206 case sizes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualication
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
Soldering Process
Recommended Soldering Technique:
• Solder wave or solder reow for EIA case sizes 0603, 0805 and 1206
• All other EIA case sizes are limited to solder reow only
Recommended Soldering Prole:
• KEMET recommends following the guidelines outlined in IPC / JEDEC JSTD020
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 9
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Table 4 – Performance & Reliability: Test Methods and Conditions
Stress Reference Test or Inspection Method
Terminal Strength JISC6429 Appendix 1, Note: Force of 1.8 kg for 60 seconds.
Board Flex JISC6429 Appendix 2, Note: Standard termination system – 2.0 mm (minimum) for all except 3 mm for C0G.
Flexible termination system – 3.0 mm (minimum).
Solderability JSTD002
Magnication 50 X. Conditions:
a) Method B, 4 hours @ 155°C, dry heat @ 235°C
b) Method B @ 215°C category 3
c) Method D, category 3 @ 260°C
Temperature Cycling JESD22 Method JA–104 1,000 cycles (-55°C to +125°C). Measurement at 24 hours +/- 2 hours after test conclusion.
Biased Humidity MILSTD–202 Method 103
Load Humidity: 1,000 hours 85°C/85% RH and 200 VDC maximum. Add 100 K ohm resistor.
Measurement at 24 hours +/- 2 hours after test conclusion.
Low Volt Humidity: 1,000 hours 85°C/85% RH and 1.5 V. Add 100 K ohm resistor. Measurement at
24 hours +/- 2 hours after test conclusion.
Moisture Resistance MILSTD–202 Method 106 t = 24 hours/cycle. Steps 7a and 7b not required. Unpowered. Measurement at 24 hours +/- 2 hours
after test conclusion.
Thermal Shock MILSTD202 Method 107 -55°C/+125°C. Note: Number of cycles required – 300. Maximum transfer time – 20 seconds. Dwell
time – 15 minutes. Air – Air.
High Temperature Life MILSTD–202 Method 108 1,000 hours at 125°C (85°C for X5R, Z5U and Y5V) with rated voltage applied.
Storage Life MILSTD–202 Method 108 150°C, 0 VDC for 1,000 hours.
Mechanical Shock MILSTD–202 Method 213 Figure 1 of Method 213, Condition F.
Resistance to Solvents MILSTD–202 Method 215 Add aqueous wash chemical, OKEM Clean or equivalent.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 10
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Storage and Handling
Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 70%
relative humidity. Temperature uctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of
receipt.
Construction
Reference Item Material
ATermination
System
Finish 100% Matte Sn SnPb (5% min)
B Barrier Layer Ni
CBase Metal Cu
DInner Electrode Ni
EDielectric Material CaZrO3
Note: Image is exaggerated in order to clearly identify all components of construction.
Capacitor Marking (Optional):
Laser Marking option is not available on C0G and Y5V dielectric devices. These capacitors are supplied unmarked only.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 11
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Tape & Reel Packaging Information
KEMET offers multilayer ceramic chip capacitors packaged in 8, 12 and 16 mm tape on 7" and 13" reels in accordance with EIA
Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on
reeling quantities for commercial chips.
8 mm, 12 mm
or 16 mm Carrier Tape
178 mm (7.00")
or
330 mm (13.00")
Anti-Static Reel
Embossed Plastic* or
Punched Paper Carrier.
Embossment or Punched Cavity
Anti-Static Cover Tape
(.10 mm (.004") Maximum Thickness)
Chip and KPS Orientation in Pocket
(except 1825 Commercial, and 1825 and 2225 Military)
*EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only.
KEMET
®
Bar Code Label
Sprocket Holes
Table 5 – Carrier Tape Con guration – Embossed Plastic & Punched Paper (mm)
EIA Case Size Tape Size (W)* Lead Space (P
1
)*
01005 – 0402 8 2
0603 – 1210 8 4
1805 – 1808 12 4
≥ 1812 12 8
KPS 1210 12 8
KPS 1812 & 2220 16 12
Array 0508 & 0612 8 4
*Refer to Figures 1 & 2 for W and P1 carrier tape reference locations.
*Refer to Tables 6 & 7 for tolerance speci cations.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 12
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o
.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 4
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 6 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Reference
Note 2
S
1
Minimum
Note 3
T
Maximum
T
1
Maximum
8 mm
1.5 +0.10/-0.0 (0.059
+0.004/-0.0)
1.0
(0.039)
1.75 ±0.10
(0.069 ±0.004) 4.0 ±0.10
(0.157 ±0.004) 2.0 ±0.05 (0.079
±0.002)
25.0
(0.984)
0.600
(0.024) 0.600
(0.024) 0.100
(0.004)
12 mm 1.5
(0.059) 30
(1.181)
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E
2
Minimum
F P1
T
2
Maximum
W
Maximum
A0,B0 & K0
8 mm Single (4 mm) 4.35
(0.171) 6.25
(0.246) 3.5 ±0.05
(0.138 ±0.002) 4.0 ±0.10
(0.157 ±0.004) 2.5
(0.098) 8.3
(0.327)
Note 512 mm Single (4 mm) &
Double (8 mm) 8.2
(0.323) 10.25
(0.404) 5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10 (0.315
±0.004) 4.6
(0.181) 12.3
(0.484)
16 mm Triple (12 mm) 12.1
(0.476) 14.25
(0.561) 5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10 (0.315
±0.004) 4.6
(0.181) 16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 6).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481 paragraph 4.3 section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4).
(e) for KPS Series product, A0 and B0 are measured on a plane 0.3 mm above the bottom of the pocket.
(f) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 13
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Figure 2 – Punched (Paper) Carrier Tape Dimensions
User Direction of Unreeling
Top Cover Tape
T
Center Lines of Cavity
P
1
ØDo Po
P
2
E
1
F
E
2
W
G
A
0
B
0
Cavity Size,
See
Note 1, Table 7
Bottom Cover Tape
T
1
T
1
Bottom Cover Tape
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 7 – Punched (Paper) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0E1P0P2T1 Maximum G Minimum
R Reference
Note 2
8 mm 1.5 +0.10 -0.0
(0.059 +0.004 -0.0) 1.75 ±0.10
(0.069 ±0.004) 4.0 ±0.10
(0.157 ±0.004) 2.0 ±0.05
(0.079 ±0.002) 0.10
(0.004) Maximum 0.75
(0.030) 25
(0.984)
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch E2 Minimum F P1 T Maximum W Maximum A0 B0
8 mm Half (2 mm) 6.25
(0.246) 3.5 ±0.05
(0.138 ±0.002)
2.0 ±0.05
(0.079 ±0.002)
1.1
(0.098)
8.3
(0.327)
Note 1
8 mm Single (4 mm)
4.0 ±0.10
(0.157 ±0.004)
8.3
(0.327)
1. The cavity de ned by A0, B0 and T shall surround the component with suf cient clearance that:
a) the component does not protrude beyond either surface of the carrier tape.
b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
c) rotation of the component is limited to 20° maximum (see Figure 3).
d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4).
e) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements.
2. The tape with or without components shall pass around R without damage (see Figure 6).
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 14
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 3 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16 – 200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16 – 56 10
72 – 200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 4 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
1.0 mm maximum
1.0 mm maximum
16 mm Tape
Figure 5 – Bending Radius
RR
Bending
Radius
Embossed
Carrier Punched
Carrier
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 15
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Figure 6 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 8 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum CD Minimum
8 mm 178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059) 13.0 +0.5/-0.2
(0.521 +0.02/-0.008) 20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W1 W2 Maximum W3
8 mm
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12 mm
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
18.4
(0.724)
16 mm
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 16
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Figure 7 – Tape Leader & Trailer Dimensions
Trailer
160 mm Minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
Minimum Leader
400 mm Minimum
Figure 8 – Maximum Camber
Carrier Tape Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 17
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central
Novi, MI
Tel: 248-994-1030
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Paris, France
Tel: 33-1-4646-1009
Sasso Marconi, Italy
Tel: 39-051-939111
Milan, Italy
Tel: 39-02-57518176
Rome, Italy
Tel: 39-06-23231718
Madrid, Spain
Tel: 34-91-804-4303
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Dortmund, Germany
Tel: 49-2307-3619672
Kwidzyn, Poland
Tel: 48-55-279-7025
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 18
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com C1009_C0G_HV_SMD • 10/9/2012 19
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage C0G Dielectric, 500 – 3,000 VDC (Commercial & Automotive Grade)
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing
Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2012.10.09 16:50:01 -04'00'