14.2 mm (0.56 inch)
Seven Segment Displays
Technical Data
Features
• Industry Standard Size
• Industry Standard Pinout
15.24 mm (0.6 in.) DIP Leads
on 2.54 mm (0.1 in.) Centers
• Choice of Colors
AlGaAs Red, High Efficiency
Red, Yellow, Green, Orange
• Excellent Appearance
Evenly Lighted Segments
Mitered Corners on Segments
Gray Package Gives Optimum
Contrast
±50° Viewing Angle
Design Flexibility
Common Anode or Common
Cathode
Single and Dual Digits
Right Hand Decimal Point
±1. Overflow Character
• Categorized for Luminous
Intensity
Yellow and Green Categorized
for Color
Use of Like Categories Yields a
Uniform Display
• High Light Output
• High Peak Current
• Excellent for Long Digit
String Multiplexing
• Intensity and Color
Selection Option
See Intensity and Color
Selected Displays Data Sheet
• Sunlight Viewable AlGaAs
Description
The 14.2 mm (0.56 inch) LED
seven segment displays are
designed for viewing distances up
to 7 metres (23 feet). These
devices use an industry standard
size package and pinout. Both the
numeric and ±1 overflow devices
feature a right hand decimal
point. All devices are available as
either common anode or common
cathode.
Orange AlGaAs Red HER Yellow Green Package
HDSP- HDSP-[1] HDSP-[1] HDSP- HDSP- Description Drawing
H401 H151 5501 5701 5601 Common Anode Right Hand Decimal A
H403 H153 5503 5703 5603 Common Cathode Right Hand Decimal B
H157 5507 5707 5607 Common Anode ±1. Overflow C
H158 5508 5708 5608 Common Cathode ±1. Overflow D
K401 5521 5721 5621 Two Digit Common Anode Right Hand Decimal E
K403 5523 5723 5623 Two Digit Common Cathode Right Hand Decimal F
Devices
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER
data sheet for low current operation.
HDSP-K40x Series
HDSP-550x Series
HDSP-552x Series
HDSP-560x Series
HDSP-562x Series
HDSP-570x Series
HDSP-572x Series
HDSP-H15x Series
HDSP-H40x Series
2
These displays are ideal for most
applications. Pin for pin
equivalent displays are also
available in a low current design.
The low current displays are ideal
for portable applications. For
additional information see the
Low Current Seven Segment
Displays data sheet.
Part Numbering System
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest
Agilent representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1
bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display
3
FUNCTION
PIN A B C D E F
1 CATHODE e ANODE e CATHODE c ANODE c E CATHODE NO. 1 E ANODE NO. 1
2 CATHODE d ANODE d ANODE c, d CATHODE c, d D CATHODE NO. 1 D ANODE NO. 1
3 ANODE[3] CATHODE[4] CATHODE b ANODE b C CATHODE NO. 1 C ANODE NO. 1
4 CATHODE c ANODE c ANODE a, b, DP CATHODE a, b, DP DP CATHODE NO. 1 DP ANODE NO. 1
5 CATHODE DP ANODE DP CATHOPDE DP ANODE DE E CATHODE NO. 1 E ANODE NO. 2
6 CATHODE b ANODE b CATHODE a ANODE a D CATHODE NO. 2 D ANODE NO. 2
7 CATHODE a ANODE a ANODE a, b, DP CATHODE a, b, DP G CATHODE NO. 2 G ANODE NO. 2
8 ANODE[3] CATHODE[4] ANODE c, d CATHODE c, d C CATHODE NO. 2 C ANODE NO. 2
9 CATHODE f ANODE f CATHODE d ANODE d DP CATHODE NO. 2 DP ANODE NO. 2
10 CATHODE g ANODE g NO PIN NO PIN B CATHODE NO. 2 B ANODE NO. 2
11 A CATHODE NO. 2 A ANODE NO. 2
12 F CATHODE NO. 2 F ANODE NO. 2
13 DIGIT NO. 2 ANODE DIGIT NO. 2 CATHODE
14 DIGIT NO. 1 ANODE DIGIT NO. 1 CATHODE
15 B CATHODE NO. 1 B ANODE NO. 1
16 A CATHODE NO. 1 A ANODE NO. 1
17 G CATHODE NO. 1 G ANODE NO. 1
18 F CATHODE NO. 1 F ANODE NO. 1
NOTES:
1. ALL DIMENSIONS IN MILLIMETRES (INCHES).
2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. REDUNDANT ANODES.
4. REDUNDANT CATHODES.
5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY.
Package Dimensions
4
Internal Circuit Diagram
Notes:
1. See Figure 2 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 7 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 8 to establish pulsed conditions.
HER/Orange
HDSP-5500
AlGaAs Red HDSP-H40x Yellow Green
HDSP-H150 HDSP-K40x HDSP-5700 HDSP-5600
Description Series Series Series Series Units
Average Power per Segment or DP 96 105 80 105 mW
Peak Forward Current per 160[1] 90[3] 60[5] 90[7] mA
Segment or DP
DC Forward Current per Segment or DP 40[2] 30[4] 20[6] 3018] mA
Operating Temperature Range -20 to +100[9] -40 to +100 °C
Storage Temperature Range -55 to +100 °C
Reverse Voltage per Segment or DP 3.0 V
Lead Solder Temperature for 3 Seconds 260 °C
(1.60 mm [0.063 in.] below seating plane)
Absolute Maximum Ratings
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 9 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C.
9. For operation below -20°C, contact your local Agilent
components sales office or an authorized distributor.
5
Electrical/Optical Characteristics at TA = 25°C
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2,5] IV9.1 16.0 mcd IF = 20 mA
(Digit Average)
1.8 IF = 20 mA
Forward Voltage/Segment or DP VFV
2.0 3.0 IF = 100 mA
H15X
Peak Wavelength λPEAK 645 nm
Dominant Wavelength[3] λd637 nm
Reverse Voltage/Segment or DP[4] VR3.0 15 V IR = 100 µA
Temperature Coefficient of VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Junction- RθJ-Pin 400 °C/W/
to-Pin Seg
AlGaAs Red
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
900 2800 IF = 10 mA
Luminous Intensity/Segment[1,2,6] IVµcd
(Digit Average) 3700 IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP VF2.1 2.5 V IF = 20 mA
55XX Peak Wavelength λPEAK 635 nm
Dominant Wavelength[3] λd626 nm
Reverse Voltage/Segment or DP[4] VR3.0 30 V IR = 100 µA
Temperature Coefficient of VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Junction- RθJ-Pin 345 °C/W/
to-Pin Seg
High Efficiency Red
6
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
600 1800 IF = 10 mA
Luminous Intensity/Segment[1,2] IVµcd
(Digit Average) 2750 IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP VF2.1 2.5 V IF = 20 mA
57XX
Peak Wavelength λPEAK 583 nm
Dominant Wavelength[3,7] λd581.5 586 592.5 nm
Reverse Voltage/Segment or DP[4] VR3.0 40 V IR = 100 µA
Temperature Coefficient of VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Junction- RθJ-Pin 345 °C/W/
to-Pin Seg
Yellow
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment IV2.37 mcd IF = 10 mA
(Segment Average)[1,2]
Forward Voltage/Segment or DP VF2.1 2.5 V IF = 20 mA
Peak Wavelength λPEAK 600 nm
H40x Dominant Wavelength[3] λd603 nm IF = 10 mA
K40x Reverse Voltage/Segment or DP[4] VR3.0 30 V IR = 100 µA
Temperature Coefficient of VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Junction- RθJ-Pin 345 °C/W/
to-Pin Seg
Orange
7
Device
Series
HDSP- Parameter Symbol Min. Typ. Max. Units Test Conditions
900 2500 IF = 10 mA
Luminous Intensity/Segment[1,2] IVµcd
(Digit Average)` 3100 IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP VF2.1 2.5 V IF = 10 mA
56XX
Peak Wavelength λPEAK 566 nm
Dominant Wavelength[3,7] λd571 577 nm
Reverse Voltage/Segment or DP[4] VR3.0 50 V IR = 100 µA
Temperature Coefficient of VF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Junction- RθJ-Pin 345 °C/W/
to-Pin Seg
High Performance Green
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are
pin for pin compatible with the HDSP-H15X series.
6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin
for pin compatible with the HDSP-550X series.
7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by
a number adjacent to the luminous intensity category letter.
AlGaAs Red
Figure 2. Maximum Tolerable Peak Current
vs. Pulse Duration – AlGaAs Red.
Figure 1. Maximum Tolerable Peak Current vs.
Pulse Duration – Red.
8
Figure 3. Maximum Allowable DC Current vs.
Ambient Temperature.
Figure 4. Forward Current vs.
Forward Voltage.
HER, Yellow, Green, Orange
Figure 7. Maximum Tolerable Peak Current
vs. Pulse Duration – HER, Orange.
Figure 8. Maximum Tolerable Peak Current
vs. Pulse Duration – Yellow.
Figure 5. Relative Luminous Intensity
vs. DC Forward Current.
Figure 6. Relative Efficiency (Luminous Intensity per
Unit Current) vs. Peak Current.
I
DC
MAX. – MAXIMUM DC CURRENT PER SEGMENT – mA
20
0
T
A
– AMBIENT TEMPERATURE – °C
30 90 120
50
30
7050
AlGaAs RED
10
20
5
15
25
35
40 60 80 100 110
40
45 Rθ
J-A
= 770°C/W
I
F
– FORWARD CURRENT PER SEGMENT – mA
0
0
V
F
– FORWARD VOLTAGE – V
160
100
60
2.0 4.0
80
20
1.0 3.0
40
AlGaAs RED
0.5 1.5 2.5 3.5
120
140
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
0
0
I
F
– FORWARD CURRENT PER SEGMENT – mA
2.00
1.50
1.25
0.75
0.25
20 40
1.75
1.00
0.50
10 30
5152535
AlGaAs RED
η
PEAK
– NORMALIZED RELATIVE EFFICIENCY
0.5
0.6
I
PEAK
– PEAK FORWARD CURRENT
PER SEGMENT – mA
50.0 150.0
1.4
0.8
5.0
1.0
1.2
AlGaAs RED
9
40
0
5
10
15
20
25
30
35
20 1009080
7060504030
T – AMBIENT TEMPERATURE – °C
A
I MAX – MAXIMUM DC CURRENT
PER SEGMENT – mA
DC
45
50
110 120
R = 770°C/W
θJ-A
GREEN
YELLOW
HER, ORANGE
Figure 11. Forward Current vs.
Forward Voltage.
Figure 9. Maximum Tolerable Peak
Current vs. Pulse Duration – Green. Figure 10. Maximum Allowable DC Current vs.
Ambient Temperature.
Figure 12. Relative Luminous
Intensity vs. DC Forward Current.
Figure 13. Relative Efficiency
(Luminous Intensity per Unit
Current) vs. Peak Current.
Electrical/Optical
For more information on
electrical/optical characteristics,
please see Application Note 1005.
Contrast Enhancement
For information on contrast
enhancement please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloro–
ethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating epoxies used to
form the package of plastic LED
parts.
For information on soldering
LEDs please refer to Application
Note 1027.
I
F
– FORWARD CURRENT PER SEGMENT – mA
1
0
V
F
– FORWARD VOLTAGE – V
90
70
60
30
10
35
80
50
20
24
40 HER SERIES,
ORANGE
SERIES
GREEN SERIES
YELLOW SERIES
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10 mA)
0
0
I
F
– DC FORWARD CURRENT – mA
4.0
3.0
2.5
1.5
0.5
20 40
3.5
2.0
1.0
10 30
5152535
HER, YELLOW,
GREEN, ORANGE
ηV – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA PER SEGMENT)
0
0.6
I
PEAK
– PEAK FORWARD CURRENT
PER SEGMENT – mA
90
20 70 80 100
1.6
1.4
1.3
1.1
0.9
0.8
6050403010
HER SERIES,
ORANGE SERIES
GREEN SERIES
0.7
1.0
1.2
1.5 YELLOW SERIES
HDSP-H15x
IV Bin Category Min. Max.
K 9.20 16.90
L 13.80 25.30
M 20.70 38.00
N 31.10 56.90
O 46.60 85.40
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-550x/552x
IV Bin Category Min. Max.
E 0.91 1.67
F 1.37 2.51
G 2.05 3.76
H 3.08 5.64
I 4.62 8.64
J 6.93 12.70
K 10.39 19.04
HER
HDSP-570x/572x
IV Bin Category Min. Max.
D 0.61 1.11
E 0.91 1.67
F 1.37 2.51
G 2.05 3.76
H 3.08 5.64
I 4.62 8.64
J 6.93 12.70
K 10.39 19.04
Yellow
HDSP-560x/562x
IV Bin Category Min. Max.
E 0.91 1.67
F 1.37 2.51
G 2.05 3.76
H 3.08 5.64
I 4.61 8.46
Green
Dominant Wavelength (nm)
Color Bin Min. Max.
Yellow 1 581.50 585.00
3 584.00 587.50
2 586.50 590.00
4 589.00 592.50
Green 2 573.00 577.00
3 570.00 574.00
4 567.00 571.00
5 564.00 568.00
Color Categories
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Agilent
representatives for further clarification/information.
10
HDSP-H40x/K40x
IV Bin Category Min. Max.
B 0.77 1.17
C 0.95 1.45
D 1.19 1.82
E 1.49 2.27
F 1.85 2.89
G 2.32 3.54
H 2.90 4.43
Orange
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(408) 654-8675
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 271 2451
India, Australia, New Zealand: (+65) 271 2394
Japan: (+81 3) 3335-8152(Domestic/Interna-
tional), or 0120-61-1280(Domestic Only)
Korea: (+65) 271 2194
Malaysia, Singapore: (+65) 271 2054
Taiwan: (+65) 271 2654
Data subject to change.
Copyright © 2002 Agilent Technologies, Inc.
Obsoletes 5988-0383EN
January 17, 2002
5988-4273EN