EGP10A thru EGP10G
Document Number 88582
24-Oct-05
Vishay General Semiconductor
www.vishay.com
1
P
a
t
e
n
t
e
d
*
DO-204AL (DO-41)
®
*Glass Encapsulation
technique is covered by
Patent No. 3,996,602,
brazed-lead assembly
to Patent No. 3,930,306
Glass Passivated Ultrafast Rectifier
Major Ratings and Characteristics
IF(AV) 1.0 A
VRRM 50 V to 200 V
IFSM 30 A
trr 50 ns
VF0.95 V, 1.25 V
Tj max. 150 °C
Features
• Cavity-free glass-passivated junction
• Ultrafast reverse recovery time
• Low forward voltage drop
• Low leakage current
• Low switching losses, high efficiency
• High forward surge capability
• Solder Dip 260 °C, 40 seconds
Typical Applications
For use in high frequency rectification and freewheel-
ing application in switching mode converters and
inverters for consumer, computer and Telecommuni-
cation
Mechanical Data
Case: DO-204AL, molded epoxy over glass body
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: Color band denotes cathode end
Maximum Ratings
TA = 25 °C unless otherwise specified
Parameter Symbol EGP10A EGP10B EGP10C EGP10D EGP10F EGP10G Unit
Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 V
Maximum RMS voltage VRMS 35 70 105 140 210 280 V
Maximum DC blocking voltage VDC 50 100 150 200 300 400 V
Maximum average forward rectified current 0.375"
(9.5 mm) lead length at TA = 55 °C
IF(AV) 1.0 A
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load
IFSM 30 A
Operating and storage temperature range TJ,TSTG - 65 to + 150 °C
www.vishay.com
2
Document Number 88582
24-Oct-05
EGP10A thru EGP10G
Vishay General Semiconductor
Electrical Characteristics
TA = 25 °C unless otherwise specified
Thermal Characteristics
TA = 25 °C unless otherwise specified
Notes:
(1) Thermal resistance from junction to ambient, and from junction to lead at 0.375" (9.5 mm) lead length, P.C.B. mounted
Ratings and Characteristics Curves
(TA = 25 °C unless otherwise noted)
Parameter Test condition Symbol EGP10A EGP10B EGP10C EGP10D EGP10F EGP10G Unit
Maximum instantaneous
forward voltage
at 1.0 A VF 0.95 1.25 V
Maximum DC reverse
current at rated DC blocking
voltage
TA = 25 °C
TA = 125 °C
IR 5.0
100
µA
Maximum reverse recovery
time
at IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr 50 ns
Typical junction capacitance at 4.0 V, 1 MHz CJ 22 15 pF
Parameter Symbol EGP10A EGP10B EGP10C EGP10D EGP10F EGP10G Unit
Typical thermal resistance (1) RθJA 50 °C/W
Figure 1. Maximum Forward Current Derating Curve
0
1.0
0 25 50 75 100 125 150 175
Average Forward Rectified Current (A)
Lead Temperature (°C)
0.5
ResistiveorInductive Load
0.375” (9.5mm) Lead Length
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
0
5.0
10
15
20
25
30
1 10010
Peak Forward Surge Current (A)
TJ = TJ max.
8.3 ms Single Half Sine-Wave
Number of Cycles at 60 Hz
EGP10A thru EGP10G
Document Number 88582
24-Oct-05
Vishay General Semiconductor
www.vishay.com
3
Package outline dimensions in inches (millimeters)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 4. Typical Reverse Leakage Characteristics
0.40.2 0.6 0.81.0 1.2 1.4 1.6
InstantaneousForward Voltage (V)
0.01
0.1
10
1
50
InstantaneousForward Current (A)
1.8
EGP10A – EGP10D
EGP10F – EGP10G
TJ = 150 °C
TJ = 25 °C
Pulse Width = 300 µs
1% Duty Cycle
020 6040 10080
0.01
0.1
10
1
100
1000
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Leakage
Current (µA)
T
J
= 100 °C
T
J
= 150 °C
T
J
= 25 °C
Figure 5. Typical Junction Capacitance
Figure 6. Typical Transient Thermal Impedance
Reverse Voltage (V)
Junction Capacitance (pF)
0.1 1 10 100
20
10
30
40
50
60
70
0
EGP10A – EGP10D
EGP10F – EGP10G
TJ = 25 °C
f = 1.0 MHz
Vsig = 50mVp-p
Pulse Duration, sec. (t)
Transient Thermal Impedance (°C/W)
0.01 0.1 1 10 100
100
10
1
0.1
0.107 (2.7)
0.080 (2.0)
0.034 (0.86)
0.028(0.71)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
DIA.
DO-204AL (DO-41)
NOTE: Lead diameter is for suffix “E” part numbers
0.026 (0.66)
0.023 (0.58)
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
