FEATURES FUNCTIONAL BLOCK DIAGRAM Low on resistance: 0.8 maximum at 125C 0.25 maximum on resistance flatness 1.8 V to 5.5 V single supply 200 mA current carrying capability Automotive temperature range: -40C to +125C Rail-to-rail operation 6-lead SOT-23, 8-lead MSOP, and 6-ball WLCSP packages Fast switching times Typical power consumption (<0.01 W) TTL-/CMOS-compatible inputs Pin compatible with the ADG719 ADG819 S2 D S1 IN SWITCHES SHOWN FOR A LOGIC 1 INPUT 02801-001 Data Sheet 0.5 , CMOS, 1.8 V to 5.5 V, 2:1 Mux/SPDT Switch ADG819 Figure 1. APPLICATIONS Power routing Battery-powered systems Communication systems Data acquisition systems Cellular phones Modems PCMCIA cards Hard drives Relay replacement GENERAL DESCRIPTION The ADG819 is a monolithic, CMOS, single-pole, double-throw (SPDT) switch. This switch is designed on a submicron process that provides low power dissipation yet gives high switching speed, low on resistance, and low leakage currents. Low power consumption and an operating supply range of 1.8 V to 5.5 V make the ADG819 ideal for battery-powered, portable instruments. PRODUCT HIGHLIGHTS 1. 2. 3. 4. Very low on resistance, 0.5 typical. 1.8 V to 5.5 V single-supply operation. High current carrying capability. Tiny 6-lead SOT-23, 8-lead MSOP, and 6-ball, 1.14 mm x 2.18 mm WLCSP packages. Each switch of the ADG819 conducts equally well in both directions when on. The ADG819 exhibits break-before-make switching action, thus preventing momentary shorting when switching channels. The ADG819 is available in a 6-lead SOT-23 package, an 8-lead MSOP package, and in a 6-ball WLCSP package. This chip occupies only a 1.14 mm x 2.18 mm area, making it the ideal candidate for space-constrained applications. Rev. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. www.analog.com Tel: 781.329.4700 Fax: 781.461.3113 (c)2002-2012 Analog Devices, Inc. All rights reserved. ADG819 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 ESD Caution...................................................................................5 Applications ....................................................................................... 1 Pin Configurations and Function Descriptions ............................6 Functional Block Diagram .............................................................. 1 Typical Performance Characteristics ..............................................7 General Description ......................................................................... 1 Test Circuits........................................................................................9 Product Highlights ........................................................................... 1 Terminology .................................................................................... 11 Revision History ............................................................................... 2 Outline Dimensions ....................................................................... 12 Specifications..................................................................................... 3 Ordering Guide .......................................................................... 13 Absolute Maximum Ratings ............................................................ 5 REVISION HISTORY 5/12--Rev. 0 to Rev. A Updated Format .................................................................. Universal Deleted ADG820 ................................................................ Universal Changes to General Description .................................................... 1 Changes to Table 1 ............................................................................ 3 Changes to Table 2 ............................................................................ 4 Change to WLCSP JA Thermal Impedance Parameter, Table 3 ................................................................................................ 5 Added Table 5 and Table 6; Renumbered Sequentially ............... 6 Deleted Test Circuit 6; Renumbered Sequentially ....................... 8 Changes to Figure 11 to Figure 14.................................................. 8 Changes to Terminology Section.................................................. 11 Updated Outline Dimensions ....................................................... 12 Changes to Ordering Guide .......................................................... 13 5/02--Revision 0: Initial Version Rev. A | Page 2 of 16 Data Sheet ADG819 SPECIFICATIONS VDD = 5 V 10%, GND = 0 V, unless otherwise noted. Table 1. Parameter ANALOG SWITCH Analog Signal Range On Resistance, RON 1 On Resistance Match Between Channels, RON1 On Resistance Flatness, RFLAT(ON)1 LEAKAGE CURRENTS Source Off Leakage, IS (Off) Channel On Leakage, ID, IS (On) DIGITAL INPUTS Input High Voltage, VINH Input Low Voltage, VINL Input Current IINL or IINH Digital Input Capacitance, CIN DYNAMIC CHARACTERISTICS2 tON tOFF Break-Before-Make Time Delay, tBBM 25C -40C to +85C -40C to +125C 0 V to VDD 0.5 0.6 0.06 0.08 0.1 0.17 0.01 0.25 0.01 0.25 0.7 0.8 0.1 0.12 0.2 0.25 2 VS = 0 V to VDD, IS = 100 mA VS = 0 V to VDD, IS = 100 mA VDD = 5.5 V VS = 4.5 V/1 V, VD = 1 V/4.5 V; see Figure 17 10 3 25 2.0 0.8 V min V max A typ A max pF typ VIN = VINL or VINH 0.1 ns typ ns max ns typ ns max ns typ RL = 50 , CL = 35 pF, VS = 3 V; see Figure 19 5 50 55 18 21 20 -71 -72 17 80 300 0.001 1.0 1 max typ max VS = 0 V to VDD, IS = 100 mA; see Figure 16 3 1 Charge Injection Off Isolation Channel-to-Channel Crosstalk Bandwidth, -3 dB CS (Off) CD, CS (On) POWER REQUIREMENTS IDD V typ max typ Test Conditions/Comments nA typ nA max nA typ nA max 0.005 35 45 10 16 5 Unit 2.0 ns min pC typ dB typ dB typ MHz typ pF typ pF typ A typ A max On resistance parameters tested with IS = 10 mA. Guaranteed by design; not subject to production test. Rev. A | Page 3 of 16 VS = VD = 1 V, or VS = VD = 4.5 V; see Figure 18 RL = 50 , CL = 35 pF, VS = 3 V; see Figure 19 RL = 50 , CL = 35 pF, VS1 = VS2 = 3 V; see Figure 20 VS = 2.5 V, RS = 0 , CL = 1 nF; see Figure 21 RL = 50 , CL = 5 pF, f = 100 kHz; see Figure 22 RL = 50 , CL = 5 pF, f = 100 kHz; see Figure 24 RL = 50 , CL = 5 pF; see Figure 23 f = 1 MHz f = 1 MHz VDD = 5.5 V, digital inputs = 0 V or 5.5 V ADG819 Data Sheet VDD = 2.7 V to 3.6 V, GND = 0 V, unless otherwise noted. Table 2. Parameter ANALOG SWITCH Analog Signal Range On Resistance, RON1 On Resistance Match Between Channels, RON1 25C -40C to +85C 0 V to VDD 0.7 1.4 0.06 1.5 0.13 On Resistance Flatness, RFLAT(ON)1 LEAKAGE CURRENTS Source Off Leakage, IS (Off) Channel On Leakage, ID, IS (On) DIGITAL INPUTS Input High Voltage, VINH Input Low Voltage, VINL Input Current IINL or IINH Digital Input Capacitance, CIN DYNAMIC CHARACTERISTICS2 tON tOFF Break-Before-Make Time Delay, tBBM -40C to +125C 1.6 0.13 max typ 0.01 0.25 0.01 0.25 2 VS = 0 V to VDD, IS = 100 mA; see Figure 16 VS = 0 V to VDD, IS = 100 mA VS = 0 V to VDD, IS = 100 mA VDD = 3.6 V VS = 3.3 V/1 V, VD = 1 V/3.3 V; see Figure 17 3 10 3 25 2.0 0.8 V min V max A typ A max pF typ VIN = VINL or VINH 0.1 ns typ ns max ns typ ns max ns typ RL = 50 , CL = 35 pF, VS = 1.5 V; see Figure 19 0.005 5 40 60 10 16 40 Test Conditions/Comments nA typ nA max nA typ nA max 65 70 18 21 10 -71 -72 17 80 300 0.001 1.0 1 V typ max typ 0.25 1 Charge Injection Off Isolation Channel-to-Channel Crosstalk Bandwidth, -3 dB CS (Off) CD, CS (On) POWER REQUIREMENTS IDD Unit 2.0 ns min pC typ dB typ dB typ MHz typ pF typ pF typ A typ A max On resistance parameters tested with IS = 10 mA. Guaranteed by design; not subject to production test. Rev. A | Page 4 of 16 VS = VD = 1 V, or VS = VD = 3.3 V; see Figure 18 RL = 50 , CL = 35 pF, VS = 1.5 V; see Figure 19 RL = 50 , CL = 35 pF, VS1 = VS2 = 1.5 V; see Figure 20 VS = 1.5 V, RS = 0 ,CL = 1 nF; see Figure 21 RL = 50 , CL = 5 pF, f = 100 kHz; see Figure 22 RL = 50 , CL = 5 pF, f = 100 kHz; see Figure 24 RL = 50 , CL = 5 pF; see Figure 23 f = 1 MHz f = 1 MHz VDD = 3.6 V, digital Inputs = 0 V or 3.6 V Data Sheet ADG819 ABSOLUTE MAXIMUM RATINGS TA = 25C, unless otherwise noted Table 3. Parameter VDD to GND Analog Inputs1 Digital Inputs1 Peak Current, Sx or D Continuous Current, Sx or D Operating Temperature Range Industrial Automotive Storage Temperature Range Junction Temperature MSOP JA Thermal Impedance JC Thermal Impedance SOT-23 (4-Layer Board) JA Thermal Impedance WLCSP (4-Layer Board) JA Thermal Impedance Lead Temperature, Soldering (10 sec) IR Reflow, Peak Temperature (<20 sec) 1 Rating -0.3 V to +7 V -0.3 V to VDD + 0.3 V or 30 mA, whichever occurs first -0.3 V to VDD + 0.3 V or 30 mA, whichever occurs first 400 mA (pulsed at 1 ms, 10% duty cycle maximum) 200 mA -40C to +85C -40C to +125C -65C to +150C 150C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Only one absolute maximum rating can be applied at any one time. Table 4. Truth Table for the ADG819 IN 0 1 Switch S1 On Off ESD CAUTION 206C/W 44C/W 119C/W 80C/W 300C 235C Overvoltages at IN, Sx, or D are clamped by internal diodes. Current should be limited to the maximum ratings given. Rev. A | Page 5 of 16 Switch S2 Off On ADG819 Data Sheet PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS S2 6 S2 Mnemonic IN VDD GND S1 D S2 Description Logic Control Input. Most Positive Power Supply Potential. Ground (0 V) Reference. Source Terminal. Can be an input or output. Drain Terminal. Can be an input or output. Source Terminal. Can be an input or output. D 1 ADG819 8 S2 7 NC TOP VIEW 6 IN (Not to Scale) 5 NC VDD 4 NC = NO CONNECT 02801-004 GND 3 Figure 4. 8-Lead MSOP Pin Configuration Table 6. 8-Lead MSOP Pin Function Descriptions Mnemonic D S1 GND VDD NC IN NC S2 5 GND 3 4 Figure 3. 6-Ball WLCSP Pin Configuration S1 2 Pin No. 1 2 3 4 5 6 7 8 2 S1 ADG819 Table 5. 6-Lead SOT-23 and 6-Ball WLCSP Pin Function Descriptions Pin No. WLCSP 6 5 4 3 2 1 VDD TOP VIEW (BUMPS AT THE BOTTOM) NOT TO SCALE Figure 2. 6-Lead SOT-23 Pin Configuration SOT-23 1 2 3 4 5 6 6 D 02801-003 VDD 2 ADG819 5 D TOP VIEW GND 3 (Not to Scale) 4 S1 02801-002 IN 1 IN 1 Description Drain Terminal. Can be an input or output. Source Terminal. Can be an input or output. Ground (0 V) Reference. Most Positive Power Supply Potential. No Connect. Do not connect to this pin. Logic Control Input. No Connect. Do not connect to this pin. Source Terminal. Can be an input or output. Rev. A | Page 6 of 16 Data Sheet ADG819 TYPICAL PERFORMANCE CHARACTERISTICS 1.0 1.0 TA = 25C 0.9 VDD = 3V VDD = 2.7V 0.8 TA = +125C 0.8 0.7 ON RESISTANCE () ON RESISTANCE () TA = +85C VDD = 3V 0.6 0.5 VDD = 3.3V 0.4 VDD = 4.5V 0.3 VDD = 5V 0.6 TA = +25C 0.4 TA = -40C VDD = 5.5V 0.2 0.2 0 1 2 3 VD, VS (V) 4 5 0 0 1.5 2.0 2.5 3.0 VD, VS (V) Figure 5. On Resistance vs. VD, VS Figure 8. On Resistance vs. VD, VS for Different Temperatures 1.0 10 VDD = 5V TA = 25 C 9 VDD = 1.8V 0.8 8 7 ON RESISTANCE () ON RESISTANCE () 1.0 0.5 02801-008 0 02801-005 0.1 6 5 4 3 TA = +125C TA = +85C 0.6 0.4 TA = +25C TA = -40C 0.2 2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VD, VS (V) 0 0 02801-006 0 1 2 3 4 5 VD, VS (V) 02801-009 1 0 Figure 9. On Resistance vs. VD, VS for Different Temperatures Figure 6. On Resistance vs. VD, VS 10 50 VDD = 3V, 5V 40 tON VDD = 3V VDD = 5V TIME (ns) 6 4 ID, IS (ON) 30 20 2 20 40 60 80 100 TEMPERATURE (C) 120 VDD = 3V, 5V tOFF 0 -40 -20 0 20 40 60 80 100 TEMPERATURE (C) Figure 7. Leakage Currents vs. Temperature Figure 10. tON/tOFF Times vs. Temperature Rev. A | Page 7 of 16 120 02801-010 -2 0 10 IS (OFF) 0 02801-007 LEAKAGE CURRENTS (nA) 8 ADG819 Data Sheet 1 250 VDD = 3V, 5V TA = 25 C TA = 25C 200 0 ON RESPONSE (dB) CHARGE INJECTION (pC) 150 100 50 VDD = 3V VDD = 5V 0 -50 -1 -2 -3 -4 -100 -5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 VS (V) -6 0.2 Figure 14. On Response vs. Frequency 1.8 VDD = 5V, 3V TA= 25C TA = 25C 1.6 LOGIC THRESHOLD VOLTAGE (V) -10 OFF ISOLATION (dB) -20 -30 -40 -50 -60 -70 -80 1.4 RISING 1.2 FALLING 1.0 0.8 0.6 0.4 0.2 1 2 FREQUENCY (MHz) 0 0 02801-012 -90 0.1 -10 -20 -30 -40 -50 -60 -70 1 2 02801-013 -80 FREQUENCY (MHz) 2 3 4 5 Figure 15. Logic Threshold Voltage vs. Supply Voltage 0 -90 0.1 1 VDD (V) Figure 12. Off Isolation vs. Frequency CROSSTALK (dB) 30 10 FREQUENCY (MHz) Figure 11. Charge Injection vs. VS (Source Voltage) 0 1 Figure 13. Crosstalk vs. Frequency Rev. A | Page 8 of 16 6 02801-015 0.5 0 02801-011 -200 02801-014 -150 Data Sheet ADG819 TEST CIRCUITS IDS V1 S RON = V1 / IDS D VD VS Figure 17. Off Leakage Figure 16. On Resistance ID (ON) S D VD NC = NO CONNECT 02801-018 NC Figure 18. On Leakage VDD 0.1F VIN VDD 90% VOUT VS RL 50 IN 50% 50% 90% CL 35pF t OFF t ON 02801-019 GND Figure 19. Switching Times VDD 0.1F VDD VS2 VIN D RL 50 S2 IN VOUT CL 35pF VOUT 90% 0V GND VIN 50% 0V 50% 90% t BBM t BBM QINJ = CL VOUT 02801-020 VS1 S1 Figure 20. Break-Before-Make Time Delay, tBBM VDD VOUT VOUT VDD VS VOUT CL 1nF IN SW OFF VIN SW ON VIN GND SW OFF Figure 21. Charge Injection Rev. A | Page 9 of 16 SW OFF SW ON SW OFF 02801-022 RS 02801-017 VS ID (OFF) IS (OFF) D 02801-016 S ADG819 Data Sheet VDD 0.1F VDD NETWORK ANALYZER S IN 50 50 D VS VOUT RL 50 GND OFF ISOLATION = 20 LOG 02801-023 VIN VOUT VS Figure 22. Off Isolation VDD 0.1F VDD NETWORK ANALYZER S IN 50 VS VOUT D RL 50 GND VOUT WITH SWITCH INSERTION LOSS = 20 LOG VOUT WITHOUT SWITCH 02801-024 VIN Figure 23. Bandwidth VDD 0.1F NETWORK ANALYZER VDD S1 VOUT RL 50 50 D R 50 S2 IN VS CHANNEL-TO-CHANNEL CROSSTALK = 20 LOG VOUT VS Figure 24. Channel-to-Channel Crosstalk Rev. A | Page 10 of 16 02801-025 GND Data Sheet ADG819 TERMINOLOGY tON Delay between applying the digital control input and the output switching on. RON Ohmic resistance between D and Sx. RON On resistance match between any two channels, that is, RON maximum - RON minimum. RFLAT(ON) Flatness is defined as the difference between the maximum and minimum value of on resistance as measured over the specified analog signal range. IS (Off) Source leakage current with the switch off. ID, IS (On) Channel leakage current with the switch on. VD (VS) Analog voltage on Terminal D and Terminal S. VINL Maximum input voltage for Logic 0. VINH Minimum input voltage for Logic 1. IINL (IINH) Input current of the digital input. tOFF Delay between applying the digital control input and the output switching off. tBBM Off time or on time measured between the 90% points of both switches when switching from one address state to another. Charge Injection A measure of the glitch impulse transferred from the digital input to the analog output during switching. Channel-to-Channel Crosstalk A measure of unwanted signal coupled through from one channel to another as a result of parasitic capacitance. Off Isolation A measure of unwanted signal coupling through an off switch. Bandwidth Frequency at which the output is attenuated by -3 dB. On Response Frequency response of the on switch. CS (Off) Off switch source capacitance. CD, CS (On) On switch capacitance. Rev. A | Page 11 of 16 ADG819 Data Sheet OUTLINE DIMENSIONS 3.00 2.90 2.80 1.70 1.60 1.50 6 5 4 1 2 3 3.00 2.80 2.60 PIN 1 INDICATOR 0.95 BSC 1.90 BSC 1.30 1.15 0.90 0.20 MAX 0.08 MIN 0.15 MAX 0.05 MIN 10 4 0 SEATING PLANE 0.50 MAX 0.30 MIN 0.60 BSC 0.55 0.45 0.35 12-16-2008-A 1.45 MAX 0.95 MIN COMPLIANT TO JEDEC STANDARDS MO-178-AB Figure 25. 6-Lead Small Outline Transistor Package [SOT-23] (RJ-6) Dimensions shown in millimeters 3.20 3.00 2.80 8 3.20 3.00 2.80 1 5.15 4.90 4.65 5 4 PIN 1 IDENTIFIER 0.65 BSC 0.95 0.85 0.75 15 MAX 1.10 MAX 0.40 0.25 6 0 0.23 0.09 COMPLIANT TO JEDEC STANDARDS MO-187-AA Figure 26. 8-Lead mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters Rev. A | Page 12 of 16 0.80 0.55 0.40 10-07-2009-B 0.15 0.05 COPLANARITY 0.10 Data Sheet ADG819 0.44 0.36 0.28 0.50 BALL PITCH BALL A1 IDENTIFIER 2 SEATING PLANE 1 0.32 NOM A 2.38 2.18 1.98 B 0.59 0.24 MAX COPLANARITY TOP VIEW (BALL SIDE DOWN) C 0.50 BOTTOM VIEW (BALL SIDE UP) 0.32 02-03-2012-A 1.34 1.14 0.94 0.67 0.57 0.47 Figure 27. 6-Ball Wafer Level Chip Scale Package [WLCSP] (CB-6-1) Dimensions shown in millimeters ORDERING GUIDE Model1 ADG819BCBZ-REEL ADG819BCBZ-REEL7 ADG819BRM ADG819BRM-REEL ADG819BRMZ ADG819BRMZ-REEL7 ADG819BRT-500RL7 ADG819BRT-REEL7 ADG819BRTZ-500RL7 ADG819BRTZ-REEL ADG819BRTZ-REEL7 1 2 3 Notes 3 3 3 3 3 3 3 3 Temperature Range -40C to +85C -40C to +85C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C Package Description 6-Ball Wafer Level Chip Package [WLCSP] 6-Ball Wafer Level Chip Package [WLCSP] 8-Lead Mini Small Outline Package [MSOP] 8-Lead Mini Small Outline Package [MSOP] 8-Lead Mini Small Outline Package [MSOP] 8-Lead Mini Small Outline Package [MSOP] 6-Lead Small Outline Transistor Package [SOT-23] 6-Lead Small Outline Transistor Package [SOT-23] 6-Lead Small Outline Transistor Package [SOT-23] 6-Lead Small Outline Transistor Package [SOT-23] 6-Lead Small Outline Transistor Package [SOT-23] Z = RoHS Compliant Part. Branding on these packages is limited to three characters due to space constraints. Contact factory for availability. Rev. A | Page 13 of 16 Package Option CB-6-1 CB-6-1 RM-8 RM-8 RM-8 RM-8 RJ-6 RJ-6 RJ-6 RJ-6 RJ-6 Branding2 SBC SBC SNB SNB SBC SBC SNB SNB SBC SBC SBC ADG819 Data Sheet NOTES Rev. A | Page 14 of 16 Data Sheet ADG819 NOTES Rev. A | Page 15 of 16 ADG819 Data Sheet NOTES (c)2002-2012 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D02801-0-5/12(A) Rev. A | Page 16 of 16