Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com
Circular Connectors CA/MS A&B
annon has re-introduced the widely
used MS A&B product line with
improved features. For corrosion
protection we have changed the shell finish to
an environmentally safe, zinc alloy plating.
The plating is a high quality finish and
uniform in color. The contacts, which are
preloaded in the insulator, have been
redesigned such that the solder cups remain
in proper orientation and will not rotate
during wiring termination. The contacts are
also machined for strength and durability and
plated with silver. The Cannon MS A&B
design meets the performance requirements
of the MIL-C-5015. The product is available in
all the popular sizes and configurations in
Class A (solid end bell) and Class B (split end
bell versions).
Applications:
•
Industrial Controls
•
Test Equipment
•
Traffic Signals
•
Bus Systems
•
High strength aluminum alloy connector
•
High strength plastic insulators
•
Environmentally safe shell finishes
•
Protected against corrosion
•
High quality plating finish
•
Threaded coupling
•
Product is tooled and available in
50 insert patterns
•
Machined contacts
•
Low cost
Performance Specifications
Temperature Range: –55°C to 125°C (-67°F to 257°F)
Current Rating: 13 A to 150 A*
Durability: 500 mating cycles min.
Wire Accommodation: 0 to 20 AWG*
No. of Contacts: 2 to 48
Termination: Solder
*Depending on contact size.
Materials and Finishes
Description Material Finish
Shell Aluminum Alloy Green Zinc or Black Zinc
Insulator Hard Plastic —
Contact Brass or Copper Alloy Silver
Product Features and Benefits
For more information: www.ittcannon.com/cat107
C
1
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com
Circular CA/MS A&B
How to Order
SERIES PREFIX
MS – Complies with Military
Specification MIL-C-5015
CA – Cannon prefix indicating
special application or
variation of MS
SHELL STYLE
3100 – Wall Mounting Receptacle
(A version only)
3101 – Cord Connector Plug
(A version only)
3102 – Box Mounting Receptacle
3106 – Straight Plug
3108 – 90° Angle Plug
(B version only)
CLASS
A – Solid or one-piece endbell
B – Split or two-piece endbell
SHELL SIZE
Coupling thread diameter in
sixteenths of an inch
CONTACT ARRANGEMENTS
Refer to page 3
CONTACT TYPE
P – Pin
S – Socket
ALTERNATE INSERT POSITIONS
Refer to page 4
MODIFICATIONS
Contact Cannon for other options.
For more information, please
contact your local Cannon sales office.
Accessories
Cable clamps are available in both the
environmentally safe green zinc and black
zinc, and will accommodate shell sizes
10SL-36. Double clamping action provides a
balanced, positive hold on the wires and
greatly reduces moisture transmission, a
real benefit in applications that require
environmental sealing. This clamp is
provided with the bushing.
Shell Part Number Part Number
Size Green Zinc Black Zinc
10SL, 12S CA17711-111 CA17711-103
14S CA17711-112 CA17711-104
16S, 16 CA17711-113 CA17711-101
18 CA17711-114 CA17711-102
20, 22 CA17711-115 CA17711-22
24, 28 CA17711-116 CA17711-105
32 CA17711-117 CA17711-106
36 CA17711-118 CA17711-107
2
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com
Circular CA/MS A&B
Contact Cavity Arrangements
10SL-3 10SL-4 12S-3 14S-1 14S-2 14S-5 14S-6 14S-7 14S-9 16-9 16-10 16-11
3 - #16 2 - #16 2 - #16 3 - #16 4 - #16 5 - #16 6 - #16 3 - #16 2 - #16 2 - #16 (B, D) 3 - #12 2 - #12
2 - #12 (A, C)
16S-1 16S-8 18-1 18-4 18-5 18-8 18-9 18-10 18-11 18-12
7 - #16 5 - #16 10 - #16 4 - #16 1 - #16 (A) 7 - #16 (A-G) 5 - #16 (B, C, E-G) 4 - #12 5 - #12 6 - #16
2 - #12 (B, C) 1 - #12 (H) 2 - #12 (A, D)
18-20 18-22 20-3 20-4 20-7 20-19 20-27 20-29 20-33
5 - #16 3 - #16 3 - #12 4 - #12 8 - #16 3 - #8 14 - #16 17 - #16 11 - #16
22-2 22-14 22-19 22-23 22-28 24-2 24-10 24-20
3 - #8 19 - #16 14 - #16 8 - #12 7 - #12 7 - #12 7 - #8 9 - #16 (A-D, G-L)
2 - #12 (E, F)
24-28 28-10 28-11 28-12 28-15 28-16 28-21
24 - #16 3 - #12 (A, F, G) 18 - #16 (A-I, N-X) 26 - #16 35 - #16 20 - #16 37 - #16
2 - #8 (B, E) 4 - #12 (J-M)
2 - #4 (C, D)
36-5 36-7 36-8 36-10
4 - #0 40 - #16 (A-Z, a-s) 46 - #16 (A-X, Z-z) 48 - #16
7 - #12 (t-z) 1 - #12 (Y)
3
Pin front view: Shell rotation
Contact
Arrangement W˚ X˚ Y˚ Z˚
14S-9 70 145 215 290
16-9 35 110 250 325
16-10 90 180 270 —
16-11 35 110 250 325
16S-1 80 — — 280
16S-8 — 170 265 —
18-1 70 145 215 290
18-4 35 110 250 325
18-5 80 110 250 280
18-8 70 — — 290
18-9 80 110 250 280
18-10 — 120 240 —
18-11 — 170 265 —
18-12 80 — — 280
18-20 90 180 270 —
18-22 70 145 215 290
20-3 70 145 215 290
20-4 45 110 250 —
20-7 80 110 250 280
20-19 90 180 270 —
20-27 35 110 250 325
Contact
Arrangement W˚ X˚ Y˚ Z˚
20-29 80 — — 280
20-33 35 110 256 325
22-2 70 145 215 290
22-14 80 — — 280
22-19 80 110 250 280
22-23 35 — 250 —
22-28 80 — — 280
24-2 80 — — 280
24-10 80 — — 280
24-20 80 110 250 280
24-28 80 110 250 280
28-10 80 110 250 280
28-11 80 110 250 280
28-12 90 180 270 —
28-15 80 110 250 280
28-16 80 110 250 280
28-21 80 110 250 280
36-5 — 120 240 —
36-7 80 110 250 280
36-8 80 110 250 280
36-10 80 125 235 280
Dimensions are shown in mm (inch)
Dimensions subject to change
www.ittcannon.com
Circular CA/MS A&B
Assembly Instructions
Step 3: Confirm insulator is fixed inside shell by
applying slight force on the engaging side of
the insulator. If properly installed, the insulator
can not be pushed out the rear of the shell. If
the insulator is displaced with this test, please
repeat steps 1 and 2.
Step 4: Complete assembly by adding coupling
nut and endbell. Please note that the coupling
nut is used on the plug side only.
*Note: During installation, ensure that all contacts remain fixed. If
during this process the contacts rotate out of position, separate
the 2 piece insulator and adjust accordingly.
Alternate Insert Positions
Step 2: After insulator is seated in shell, install
the snap ring on the rear of the connector.
Slightly compress ring and insert into recessed
area just above the insulator. If not completely
in place, manipulate the snap ring with finger
until visual or audible seating confirmation is
made. No tooling is required.
Step 1*: Remove tape from insulator. With the
insulator and shell positioned as shown above,
polarize insulator to desired position and place
inside shell using the internal keyway as
guide. Once inside the shell, the insulator
cannot rotate. However, until the snap ring is
applied in step 2, the insulator is not
captivated in the shell.
Unassembled connectors are supplied in kits,
an insulator kit and hardware kit. The insulator
kit includes a snap ring and insulator with
preloaded contacts. The hardware kit includes
the shell along with appropriate endbell
(except box mount receptacles) and coupling
nut (plug only).
Contact
Arrangement W˚ X˚ Y˚ Z˚
10SL-3 — — — —
10SL-4 — — — —
12S-3 70 145 215 290
14S-1 — — — —
14S-2 — 120 240 —
14S-5 — 110 — —
14S-6 — — — —
14S-7 90 180 270 —
4
Industrial Connectors
CA/MS A&B
2001
ittcannon.com
