Circular Connectors CA/MS A&B C annon has re-introduced the widely used MS A&B product line with improved features. For corrosion protection we have changed the shell finish to an environmentally safe, zinc alloy plating. The plating is a high quality finish and uniform in color. The contacts, which are preloaded in the insulator, have been redesigned such that the solder cups remain in proper orientation and will not rotate during wiring termination. The contacts are also machined for strength and durability and plated with silver. The Cannon MS A&B design meets the performance requirements of the MIL-C-5015. The product is available in all the popular sizes and configurations in Class A (solid end bell) and Class B (split end bell versions). Applications: * Industrial Controls * Test Equipment * Traffic Signals * Bus Systems For more information: www.ittcannon.com/cat107 Product Features and Benefits * High strength aluminum alloy connector * High strength plastic insulators * Environmentally safe shell finishes * Protected against corrosion * High quality plating finish * Threaded coupling * Product is tooled and available in * * 50 insert patterns Machined contacts Low cost Performance Specifications Temperature Range: Current Rating: Durability: Wire Accommodation: No. of Contacts: Termination: -55C to 125C (-67F to 257F) 13 A to 150 A* 500 mating cycles min. 0 to 20 AWG* 2 to 48 Solder *Depending on contact size. Materials and Finishes Description Shell Insulator Contact Material Aluminum Alloy Hard Plastic Brass or Copper Alloy Finish Green Zinc or Black Zinc -- Silver Dimensions are shown in mm (inch) Dimensions subject to change www.ittcannon.com 1 Circular CA/MS A&B How to Order SERIES PREFIX MS - Complies with Military Specification MIL-C-5015 CA - Cannon prefix indicating special application or variation of MS SHELL STYLE 3100 - Wall Mounting Receptacle (A version only) 3101 - Cord Connector Plug (A version only) 3102 - Box Mounting Receptacle 3106 - Straight Plug 3108 - 90 Angle Plug (B version only) CLASS A - Solid or one-piece endbell B - Split or two-piece endbell SHELL SIZE Coupling thread diameter in sixteenths of an inch CONTACT ARRANGEMENTS Refer to page 3 CONTACT TYPE P - Pin S - Socket ALTERNATE INSERT POSITIONS Refer to page 4 MODIFICATIONS Contact Cannon for other options. For more information, please contact your local Cannon sales office. Accessories Cable clamps are available in both the environmentally safe green zinc and black zinc, and will accommodate shell sizes 10SL-36. Double clamping action provides a balanced, positive hold on the wires and greatly reduces moisture transmission, a real benefit in applications that require environmental sealing. This clamp is provided with the bushing. Shell Size 10SL, 12S 14S 16S, 16 18 20, 22 24, 28 32 36 Part Number Green Zinc CA17711-111 CA17711-112 CA17711-113 CA17711-114 CA17711-115 CA17711-116 CA17711-117 CA17711-118 Part Number Black Zinc CA17711-103 CA17711-104 CA17711-101 CA17711-102 CA17711-22 CA17711-105 CA17711-106 CA17711-107 Dimensions are shown in mm (inch) Dimensions subject to change www.ittcannon.com 2 Circular CA/MS A&B Contact Cavity Arrangements 10SL-3 10SL-4 12S-3 14S-1 14S-2 14S-5 14S-6 14S-7 14S-9 16-9 16-10 16-11 3 - #16 2 - #16 2 - #16 3 - #16 4 - #16 5 - #16 6 - #16 3 - #16 2 - #16 2 - #16 (B, D) 2 - #12 (A, C) 3 - #12 2 - #12 16S-1 16S-8 18-1 18-4 18-5 18-8 18-9 18-10 18-11 18-12 7 - #16 5 - #16 10 - #16 4 - #16 1 - #16 (A) 2 - #12 (B, C) 7 - #16 (A-G) 1 - #12 (H) 5 - #16 (B, C, E-G) 2 - #12 (A, D) 4 - #12 5 - #12 6 - #16 18-20 18-22 20-3 20-4 20-7 20-19 20-27 20-29 20-33 5 - #16 3 - #16 3 - #12 4 - #12 8 - #16 3 - #8 14 - #16 17 - #16 11 - #16 22-2 22-14 22-19 22-23 22-28 24-2 24-10 24-20 3 - #8 19 - #16 14 - #16 8 - #12 7 - #12 7 - #12 7 - #8 9 - #16 (A-D, G-L) 2 - #12 (E, F) 24-28 28-10 28-11 28-12 28-15 28-16 28-21 24 - #16 3 - #12 (A, F, G) 2 - #8 (B, E) 2 - #4 (C, D) 18 - #16 (A-I, N-X) 4 - #12 (J-M) 26 - #16 35 - #16 20 - #16 37 - #16 36-5 36-7 36-8 36-10 4 - #0 40 - #16 (A-Z, a-s) 7 - #12 (t-z) 46 - #16 (A-X, Z-z) 1 - #12 (Y) 48 - #16 Dimensions are shown in mm (inch) Dimensions subject to change www.ittcannon.com 3 Circular CA/MS A&B Alternate Insert Positions Pin front view: Shell rotation Contact Arrangement 10SL-3 10SL-4 12S-3 14S-1 14S-2 14S-5 14S-6 14S-7 W -- -- 70 -- -- -- -- 90 X -- -- 145 -- 120 110 -- 180 Y -- -- 215 -- 240 -- -- 270 Z -- -- 290 -- -- -- -- -- Contact Arrangement 14S-9 16-9 16-10 16-11 16S-1 16S-8 18-1 18-4 18-5 18-8 18-9 18-10 18-11 18-12 18-20 18-22 20-3 20-4 20-7 20-19 20-27 W 70 35 90 35 80 -- 70 35 80 70 80 -- -- 80 90 70 70 45 80 90 35 X 145 110 180 110 -- 170 145 110 110 -- 110 120 170 -- 180 145 145 110 110 180 110 Y 215 250 270 250 -- 265 215 250 250 -- 250 240 265 -- 270 215 215 250 250 270 250 Z 290 325 -- 325 280 -- 290 325 280 290 280 -- -- 280 -- 290 290 -- 280 -- 325 Contact Arrangement 20-29 20-33 22-2 22-14 22-19 22-23 22-28 24-2 24-10 24-20 24-28 28-10 28-11 28-12 28-15 28-16 28-21 36-5 36-7 36-8 36-10 W 80 35 70 80 80 35 80 80 80 80 80 80 80 90 80 80 80 -- 80 80 80 X -- 110 145 -- 110 -- -- -- -- 110 110 110 110 180 110 110 110 120 110 110 125 Y -- 256 215 -- 250 250 -- -- -- 250 250 250 250 270 250 250 250 240 250 250 235 Z 280 325 290 280 280 -- 280 280 280 280 280 280 280 -- 280 280 280 -- 280 280 280 Assembly Instructions Unassembled connectors are supplied in kits, an insulator kit and hardware kit. The insulator kit includes a snap ring and insulator with preloaded contacts. The hardware kit includes the shell along with appropriate endbell (except box mount receptacles) and coupling nut (plug only). Step 1*: Remove tape from insulator. With the insulator and shell positioned as shown above, polarize insulator to desired position and place inside shell using the internal keyway as guide. Once inside the shell, the insulator cannot rotate. However, until the snap ring is applied in step 2, the insulator is not captivated in the shell. Step 2: After insulator is seated in shell, install the snap ring on the rear of the connector. Slightly compress ring and insert into recessed area just above the insulator. If not completely in place, manipulate the snap ring with finger until visual or audible seating confirmation is made. No tooling is required. Step 3: Confirm insulator is fixed inside shell by applying slight force on the engaging side of the insulator. If properly installed, the insulator can not be pushed out the rear of the shell. If the insulator is displaced with this test, please repeat steps 1 and 2. Step 4: Complete assembly by adding coupling nut and endbell. Please note that the coupling nut is used on the plug side only. *Note: During installation, ensure that all contacts remain fixed. If during this process the contacts rotate out of position, separate the 2 piece insulator and adjust accordingly. Dimensions are shown in mm (inch) Dimensions subject to change www.ittcannon.com 4 ittcannon.com Industrial Connectors CA/MS A&B 2001