SN75ALS175 QUADRUPLE DIFFERENTIAL LINE RECEIVER SLLS131C - SEPTEMBER 1991 - REVISED MAY 1995 D D D D D D D D D Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B, EIA/TIA-423-B, and RS-485 Meets ITU Recommendations V.10, V.11, X.26, and X.27 Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments Low Supply Current Requirement 27 mA Max Common-Mode Input Voltage Range of - 12 V to 12 V Input Sensitivity . . . 200 mV Input Hysteresis . . . 50 mV Typ High Input Impedance . . . 12 k Min Operates From Single 5-V Supply N OR NS PACKAGE (TOP VIEW) 1B 1A 1Y 1,2EN 2Y 2A 2B GND 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC 4B 4A 4Y 3,4EN 3Y 3A 3B The NS package is only available left-ended taped and reeled (order device SN75ALS175NSLE). description The SN75ALS175 is a monolithic quadruple differential line receiver with 3-state outputs. It is designed to meet the requirements of ANSI Standards EIA/TIA-422-B, EIA/TIA-423-B, and RS-485 and several ITU recommendations. Advanced low-power Schottky technology provides high speed without the usual power penalty. Each of the two pairs of receivers has a common active-high enable. The device features high input impedance, input hysteresis for increased noise immunity, and input sensitivity of 200 mV over a common-mode input voltage range of - 12 V to 12 V. The SN75ALS175 is characterized for operation from 0C to 70C. FUNCTION TABLE (each receiver) DIFFERENTIAL INPUTS A-B ENABLES EN OUTPUT Y VID 0.2 V H H - 0.2 V < VID < 0.2 V H ? VID - 0.2 V H L X L Z Open Circuit H H H = high level, L = low level, ? = indeterminate, X = irrelevant, Z = high impedance (off) Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1995, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN75ALS175 QUADRUPLE DIFFERENTIAL LINE RECEIVER SLLS131C - SEPTEMBER 1991 - REVISED MAY 1995 logic symbol 4 1,2EN logic diagram (positive logic) 4 EN 1,2EN 2 1A 3 1 1B 6 2A 1Y 1B 5 7 1A 2A 3,4EN 14 4A 3,4EN 11 9 3B 1Y 6 5 7 2Y 2B EN 10 3A 3 1 2Y 2B 12 2 3Y 13 15 12 3A 4Y 4B 10 9 11 3Y 3B This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 4A 4B 14 15 13 4Y schematics of inputs and outputs EQUIVALANT OF EACH A OR B INPUT VCC EQUIVALANT OF EACH ENABLE INPUT VCC VCC 17 k NOM Input 288 k NOM VCC (A) or GND (B) 17 k NOM 70 EN Input Output 17 k NOM GND GND GND 2 TYPICAL OF ALL OUTPUTS POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN75ALS175 QUADRUPLE DIFFERENTIAL LINE RECEIVER SLLS131C - SEPTEMBER 1991 - REVISED MAY 1995 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI (A or B inputs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 V Enable input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Low-level output current, IOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential input voltage, are with respect to network ground terminal. 2. Differential-input voltage is measured at the noninverting input with respect to the corresponding inverting input. DISSIPATION RATING TABLE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING N 1150 mW 9.2 mW/C 736 mW NS 625 mW 5.0 mW/C 400 mW PACKAGE recommended operating conditions Supply voltage, VCC MIN NOM MAX UNIT 4.75 5 5.25 V 12 V 12 V Common-mode input voltage, VIC Differential input voltage, VID High-level enable-input voltage, VIH 2 Low-level enable-input voltage, VIL V 0.8 High-level output current, IOH Low-level output current, IOL Operating free-air temperature, TA 0 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 V - 400 A 8 mA 70 C 3 SN75ALS175 QUADRUPLE DIFFERENTIAL LINE RECEIVER SLLS131C - SEPTEMBER 1991 - REVISED MAY 1995 electrical characteristics over recommended ranges of common-mode input voltage, supply voltage and operating free-air temperature (unless otherwise noted) (see Note 3) PARAMETER VIT+ Positive-going input threshold voltage VIT- Negative-going input threshold voltage Vhys VIK Hysteresis voltage (VIT + - VIT -) VOH VOL High-level output voltage IOZ High-impedance-state output current Enable-input clamp voltage Low-level output voltage TEST CONDITIONS TYP MAX UNIT 200 mV -200 mV 50 II = - 18 mA VID = 200 mV, VID = - 200 mV, VO = 0.4 V to 2.4 V II Line input current Other input at 0 V V, IIH IIL High-level enable-input current VIH(E) = 2.7 V VIL(E) = 0.4 V ri Input resistance IOS Short-circuit output current ICC Suply current (total package) Low-level enable-input current MIN mV - 1.5 IOH = - 400 A, IOL = 8 mA, See Figure 1 2.7 V See Figure 1 VI = 12 V VI = - 7 V See Note 3 V 0.45 V 20 A 1 - 0.8 mA 20 A - 100 A - 85 mA 12 k VO = 0 No load, - 15 Outputs enabled 16 24 No load, Outputs disabled 18 27 mA All typical values are at VCC = 5 V, TA = 25C. The algebraic convention, in which the less positive (more negative) limit is designated as minimum, is used in this data sheet for threshold voltage levels only. NOTE 3: Refer to ANSI Standard RS-485 for exact conditions. switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS tPHL tPLH Propagation delay time, high- to low-level output tPZH tPZL Output enable time to high level Propagation delay time, low- to high-level output Output enable time to low level tPHZ Output disable time from high level tPLZ Output disable time from low level All typical values are at VCC = 5 V, TA = 25C. 4 POST OFFICE BOX 655303 VID = - 2.5 V to 2.5 V, CL = 15 pF, See Figure 2 CL = 15 pF, pF See Figure 3 pF CL = 15 pF, See Figure 3 * DALLAS, TEXAS 75265 MIN TYP MAX 9 18 27 ns 9 18 27 ns 4 12 18 ns 6 13 21 ns 10 21 27 ns 8 15 25 ns UNIT SN75ALS175 QUADRUPLE DIFFERENTIAL LINE RECEIVER SLLS131C - SEPTEMBER 1991 - REVISED MAY 1995 PARAMETER MEASUREMENT INFORMATION VID VOH VOL 2V IOH (-) IOL (+) Figure 1. VOH, VOL Generator (see Note A) Output 50 3V Input 1.5 V 1.5 V 0V CL = 15 pF (see Note B) 1.5 V tPLH tPHL VOH Output 1.3 V 1.3 V VOL 2V TEST CIRCUIT VOLTAGE WAVEFORMS NOTES: A. The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, duty cycle = 50%, tr = tf = 6 ns. B. CL includes probe and jig capacitance. Figure 2. Propagation Delay Times POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SN75ALS175 QUADRUPLE DIFFERENTIAL LINE RECEIVER SLLS131C - SEPTEMBER 1991 - REVISED MAY 1995 PARAMETER MEASUREMENT INFORMATION Output SW 1 1.5 V 2 k -1.5 V SW2 5V Generator (see Note A) See Note C 5 k CL = 15 pF (see Note B) SW3 51 TEST CIRCUIT Input tPZH Output 3V 1.5 V 0 V SW1 to 1.5 V SW2 Open SW3 Closed VOH 1.5 V 0V 3V Input tPZL Output tPZL tPZH 3V Input 1.5 V 0 V SW1 to -1.5 V SW2 Closed SW3 Open 4.5 V 1.5 V VOL 3V Input 1.5 V 0V 0V SW1 to 1.5 V SW2 Closed SW3 Closed tPHZ 3V 1.5 V tPZL VOH Output 0.5 V 1.4 V Output SW1 to -1.5 V SW2 Closed SW3 Closed 0.5 V 1.4 V VOL tPHZ tPLZ VOLTAGE WAVEFORMS NOTES: A. The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, duty cycle = 50%, tr = tf = 6 ns. B. CL includes probe and jig capacitance. C. All diodes are 1N916 or equivalent. Figure 3. Enable and Disable Times 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN75ALS175N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75ALS175NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN75ALS175NSLE OBSOLETE SO NS 16 TBD Call TI SN75ALS175NSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75ALS175NSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN75ALS175NSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN75ALS175NSR Package Package Pins Type Drawing SO NS 16 SPQ Reel Reel Diameter Width (mm) W1 (mm) 2000 330.0 16.4 Pack Materials-Page 1 A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 8.2 10.5 2.5 12.0 16.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN75ALS175NSR SO NS 16 2000 346.0 346.0 33.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee(R) Solutions amplifier.ti.com dataconverter.ti.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2008, Texas Instruments Incorporated