LM317D2T--TR - STMicroelectronics, Inc.

November 2011 Doc ID 2154 Rev 17 1/25

LM117

LM217, LM317

1.2 V to 37 V adjustable voltage regulators

Features

■Output voltage range: 1.2 to 37 V

■Output current in excess of 1.5 A

■0.1 % line and load regulation

■Floating operation for high voltages

■Complete series of protections: current limiting,

thermal shutdown and SOA control

Description

The LM117, LM217, LM317 are monolithic

integrated circuits in TO-220, TO-220FP, TO-3

and D²PAK packages intended for use as positive

adjustable voltage regulators. They are designed

to supply more than 1.5 A of load current with an

output voltage adjustable over a 1.2 to 37 V

range. The nominal output voltage is selected by

means of only a resistive divider, making the

device exceptionally easy to use and eliminating

the stocking of many fixed regulators.

TO-220FP

D²PAK

TO-220

TO-3

Table 1. Device summary

Order codes

TO-220 D²PAK (tape and reel) TO-220FP TO-3

LM117K

LM217T LM217D2T-TR LM217K

LM317T LM317T-DG (1) LM317D2T-TR LM317P LM317K

1. TO-220 Dual Gauge frame.

www.st.com

Contents LM117, LM217, LM317

2/25 Doc ID 2154 Rev 17

Contents

1 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5 Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

LM117, LM217, LM317 Pin configuration

Doc ID 2154 Rev 17 3/25

1 Pin configuration

Figure 1. Pin connections (top view)

TO-220FP

TO-3

TO-220

D²PAK (Any Type)

Maximum ratings LM117, LM217, LM317

4/25 Doc ID 2154 Rev 17

2 Maximum ratings

Note: Absolute maximum ratings are those values beyond which damage to the device may occur.

Functional operation under these condition is not implied.

Table 2. Absolute maximum ratings

Symbol Parameter Value Unit

VI - VOInput-reference differential voltage 40 V

IOOutput current Internally limited

TOP Operating junction temperature for:

LM117 - 55 to 150

°CLM217 - 25 to 150

LM317 0 to 125

PDPower dissipation Internally limited

TSTG Storage temperature - 65 to 150 °C

Table 3. Thermal data

Symbol Parameter D²PAK TO-220 TO-220FP TO-3 Unit

RthJC Thermal resistance junction-case 3 5 5 4 °C/W

RthJA Thermal resistance junction-ambient 62.5 50 60 35 °C/W

LM117, LM217, LM317 Diagram

Doc ID 2154 Rev 17 5/25

3 Diagram

Figure 2. Schematic diagram

Electrical characteristics LM117, LM217, LM317

6/25 Doc ID 2154 Rev 17

4 Electrical characteristics

VI - VO = 5 V, IO = 500 mA, IMAX = 1.5 A and PMAX = 20 W, TJ = - 55 to 150 °C for LM117,

TJ = - 25 to 150 °C for LM217, unless otherwise specified.

Table 4. Electrical characteristics for LM117/LM217

Symbol Parameter Test conditions Min. Typ. Max. Unit

ΔVOLine regulation VI - VO = 3 to 40 V TJ = 25°C 0.01 0.02 %/V

0.02 0.05

ΔVOLoad regulation

VO ≤5 V

IO = 10 mA to IMAX

TJ = 25°C 5 15 mV

20 50

VO ≥5 V,

IO = 10 mA to IMAX

TJ = 25°C 0.1 0.3 %

0.3 1

IADJ Adjustment pin current 50 100 µA

ΔIADJ Adjustment pin current VI - VO = 2.5 to 40V IO = 10 mA to IMAX 0.2 5 µA

VREF

Reference voltage

(between pin 3 and pin 1)

VI - VO = 2.5 to 40V IO= 10 mA to IMAX

PD ≤ PMAX

1.2 1.25 1.3 V

ΔVO/VO

Output voltage

temperature stability 1%

IO(min) Minimum load current VI - VO = 40 V 3.5 5 mA

IO(max) Maximum load current VI - VO ≤ 15 V, PD < PMAX 1.5 2.2 A

VI - VO = 40 V, PD < PMAX, TJ = 25°C 0.4

eN Output noise voltage

(percentage of VO)B = 10Hz to 100kHz, TJ = 25°C 0.003 %

SVR Supply voltage rejection (1) TJ = 25°C, f = 120Hz CADJ=0 65 dB

CADJ=10µF 66 80

1. CADJ is connected between pin 1 and ground.

LM117, LM217, LM317 Electrical characteristics

Doc ID 2154 Rev 17 7/25

VI - VO = 5 V, IO = 500 mA, IMAX = 1.5 A and PMAX = 20 W, TJ = 0 to 125°C, unless otherwise

specified.

Table 5. Electrical characteristics for LM317

Symbol Parameter Test conditions Min. Typ. Max. Unit

ΔVOLine regulation VI - VO = 3 to 40 V TJ = 25°C 0.01 0.04 %/V

0.02 0.07

ΔVOLoad regulation

VO ≤ 5 V

IO = 10 mA to IMAX

TJ = 25°C 5 25 mV

20 70

VO ≥5 V,

IO = 10 mA to IMAX

TJ = 25°C 0.1 0.5 %

0.3 1.5

IADJ Adjustment pin current 50 100 µA

ΔIADJ Adjustment pin current VI - VO = 2.5 to 40V,

IO = 10 mA to 500mA 0.2 5 µA

VREF

Reference voltage

(between pin 3 and pin 1)

VI - VO = 2.5 to 40V IO = 10 mA to 500mA

PD ≤ PMAX

1.21.251.3 V

ΔVO/VO

Output voltage

temperature stability 1%

IO(min) Minimum load current VI - VO = 40 V 3.5 10 mA

IO(max) Maximum load current VI - VO ≤ 15 V, PD < PMAX 1.5 2.2 A

VI - VO = 40 V, PD < PMAX, TJ = 25°C 0.4

eN Output noise voltage

(percentage of VO)B = 10Hz to 100kHz, TJ = 25°C 0.003 %

SVR Supply voltage rejection (1) TJ = 25°C, f = 120Hz CADJ=0 65 dB

CADJ=10µF 66 80

1. CADJ is connected between pin 1 and ground.

Typical characteristics LM117, LM217, LM317

8/25 Doc ID 2154 Rev 17

5 Typical characteristics

Figure 3. Output current vs. input-output

differential voltage

Figure 4. Dropout voltage vs. junction

temperature

Figure 5. Reference voltage vs. junction

Figure 6. Basic adjustable regulator

LM117, LM217, LM317 Application information

Doc ID 2154 Rev 17 9/25

6 Application information

The LM117, LM217, LM317 provides an internal reference voltage of 1.25 V between the

output and adjustments terminals. This is used to set a constant current flow across an

external resistor divider (see Figure 3), giving an output voltage VO of:

VO = VREF (1 + R2/R1) + IADJ R2

The device was designed to minimize the term IADJ (100 µA max) and to maintain it very

constant with line and load changes. Usually, the error term IADJ × R2 can be neglected. To

obtain the previous requirement, all the regulator quiescent current is returned to the output

terminal, imposing a minimum load current condition. If the load is insufficient, the output

voltage will rise. Since the LM117, LM217, LM317 is a floating regulator and "sees" only the

input-to-output differential voltage, supplies of very high voltage with respect to ground can

be regulated as long as the maximum input-to-output differential is not exceeded.

Furthermore, programmable regulator are easily obtainable and, by connecting a fixed

resistor between the adjustment and output, the device can be used as a precision current

regulator. In order to optimize the load regulation, the current set resistor R1 (see Figure 3)

should be tied as close as possible to the regulator, while the ground terminal of R2 should

be near the ground of the load to provide remote ground sensing. Performance may be

improved with added capacitance as follow:

An input bypass capacitor of 0.1 µF

An adjustment terminal to ground 10 µF capacitor to improve the ripple rejection of about 15

dB (CADJ).

An 1 µF tantalum (or 25 µF Aluminium electrolytic) capacitor on the output to improve

transient response. In additional to external capacitors, it is good practice to add protection

diodes, as shown in Figure 4 D1 protect the device against input short circuit, while D2

protect against output short circuit for capacitance discharging.

Note: D1 protect the device against input short circuit, while D2 protects against output short

circuit for capacitors discharging.

Figure 7. Voltage regulator with protection diodes

Application information LM117, LM217, LM317

10/25 Doc ID 2154 Rev 17

IO = (VREF / R1) + IADJ = 1.25 V / R1

Figure 8. Slow turn-on 15 V regulator

Figure 9. Current regulator

Figure 10. 5 V electronic shut-down regulator

LM117, LM217, LM317 Application information

Doc ID 2154 Rev 17 11/25

(R2 sets maximum VO)

* RS sets output impedance of charger ZO = RS (1 + R2/R1). Use of RS allows low charging rates whit fully

charged battery.

Figure 11. Digitally selected outputs

Figure 12. Battery charger (12 V)

Application information LM117, LM217, LM317

12/25 Doc ID 2154 Rev 17

* R3 sets peak current (0.6 A for 1 0).

** C1 recommended to filter out input transients.

Figure 13. Current limited 6 V charger

LM117, LM217, LM317 Package mechanical data

Doc ID 2154 Rev 17 13/25

7 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®

specifications, grade definitions and product status are available at: www.st.com.

ECOPACK® is an ST trademark.

Table 6. TO-220 mechanical data

Dim.

Type STD - ST Dual Gauge Type STD - ST Single Gauge

mm. mm.

Min. Typ. Max. Min. Typ. Max.

A 4.40 4.60 4.40 4.60

b 0.61 0.88 0.61 0.88

b1 1.14 1.70 1.14 1.70

c 0.48 0.70 0.48 0.70

D 15.25 15.75 15.25 15.75

D1 1.27

E 10.00 10.40 10.00 10.40

e 2.40 2.70 2.40 2.70

e1 4.95 5.15 4.95 5.15

F 1.23 1.32 0.51 0.60

H1 6.20 6.60 6.20 6.60

J1 2.40 2.72 2.40 2.72

L 13.00 14.00 13.00 14.00

L1 3.50 3.93 3.50 3.93

L20 16.40 16.40

L30 28.90 28.90

∅P 3.75 3.85 3.75 3.85

Q 2.65 2.95 2.65 2.95

Package mechanical data LM117, LM217, LM317

14/25 Doc ID 2154 Rev 17

Note: 1 Max resin gate protrusion: 0.5 mm.

2 Resin gate position is accepted in each of the two positions shown on the drawing, or their

symmetrical.

Figure 14. Drawing dimension TO-220 (type STD-ST Dual Gauge)

0015988/A

LM117, LM217, LM317 Package mechanical data

Doc ID 2154 Rev 17 15/25

Note: In spite of some difference in tolerances, the packages are compatible.

Figure 15. Drawing dimension TO-220 (type STD-ST Single Gauge)

8174627_B

Package mechanical data LM117, LM217, LM317

16/25 Doc ID 2154 Rev 17

Figure 16. Drawing dimension tube for TO-220 Dual Gauge (mm.)

Figure 17. Drawing dimension tube for TO-220 Single Gauge (mm.)

LM117, LM217, LM317 Package mechanical data

Doc ID 2154 Rev 17 17/25

Dim. mm. inch.

Min. Typ. Max. Min. Typ. Max.

A 11.85 0.466

B0.96 1.05 1.10 0.037 0.041 0.043

C 1.70 0.066

D8.7 0.342

E 20.0 0.787

G 10.90.429

N 16.90.665

P 26.2 1.031

R3.88 4.090.152 0.161

U39.5 1.555

V30.10 1.185

TO-3 mechanical data

P003C/C

Package mechanical data LM117, LM217, LM317

18/25 Doc ID 2154 Rev 17

Dim. mm. inch.

Min. Typ Max. Min. Typ. Max.

A 4.40 4.60 0.1730.181

B 2.5 2.7 0.098 0.106

D 2.5 2.75 0.098 0.108

E 0.45 0.70 0.017 0.027

F 0.75 1 0.0300.039

F1 1.15 1.50 0.045 0.059

F2 1.15 1.50 0.045 0.059

G4.95 5.2 0.194 0.204

G1 2.4 2.7 0.094 0.106

H 10.0 10.40 0.393 0.409

L2 16 0.630

L328.6 30.6 1.126 1.204

L4 9.810.6 0.3850.417

L5 2.93.6 0.114 0.142

L6 15.916.4 0.626 0.645

L7 99.30.354 0.366

DIA. 33.2 0.1180.126

TO-220FP mechanical data

7012510A-

LM117, LM217, LM317 Package mechanical data

Doc ID 2154 Rev 17 19/25

Figure 18. Drawing dimension D²PAK (type STD-ST)

0079457/L

Package mechanical data LM117, LM217, LM317

20/25 Doc ID 2154 Rev 17

Figure 19. Drawing dimension D²PAK (type WOOSEOK-SUBCON.)

0079457/L

LM117, LM217, LM317 Package mechanical data

Doc ID 2154 Rev 17 21/25

Note: The D²PAK package coming from the subcontractor Wooseok is fully compatible with the

ST's package suggested footprint.

Table 7. D²PAK mechanical data

Dim.

Type STD-ST Type WOOSEOK-Subcon.

mm. mm.

MIN. TYP. MAX. MIN. TYP. MAX.

A 4.40 4.60 4.30 4.70

A1 0.03 0.23 0 0.20

b 0.70 0.93 0.70 0.90

b2 1.14 1.70 1.17 1.37

c 0.45 0.60 0.45 0.50 0.60

c2 1.23 1.36 1.25 1.30 1.40

D 8.95 9.35 9 9.20 9.40

D1 7.50 7.50

E 10 10.40 9.80 10.20

E1 8.50 7.50

e2.54 2.54

e1 4.88 5.28 5.08

H 15 15.85 15 15.30 15.60

J1 2.49 2.69 2.20 2.60

L 2.29 2.79 1.79 2.79

L1 1.27 1.40 1 1.40

L2 1.30 1.75 1.20 1.60

R 0.4 0.30

V2 0° 8° 0° 3°

Package mechanical data LM117, LM217, LM317

22/25 Doc ID 2154 Rev 17

Figure 20. D²PAK footprint recommended data

Table 8. Footprint data

Values

Dim. mm. inch.

A 12.20 0.480

B9.750.384

C 16.90 0.665

D3.500.138

E1.600.063

F2.540.100

G5.080.200

LM117, LM217, LM317 Package mechanical data

Doc ID 2154 Rev 17 23/25

Dim.

mm. inch.

Min. Typ. Max. Min. Typ. Max.

A180 7.086

C 12.813.0 13.2 0.504 0.512 0.519

D 20.2 0.795

N60 2.362

T 14.4 0.567

Ao 10.50 10.6 10.70 0.4130.417 0.421

Bo 15.70 15.80 15.90 0.6180.622 0.626

Ko 4.80 4.90 5.00 0.189 0.193 0.197

Po 3.94.0 4.1 0.1530.157 0.161

P 11.912.0 12.1 0.4680.472 0.476

Tape & reel D2PAK-P2PAK-D2PAK/A-P2PAK/A mechanical data

Revision history LM117, LM217, LM317
24/25 Doc ID 2154 Rev 17
8  Revision history  
Table 9. Document revision history
Date Revision Changes
01-Sep-2004 10 Mistake VREF ==> VO, tables 1, 4 and 5.
19-Jan-2007 11 D²PAK mechanical data has been updated, add footprint data and the 
document has been reformatted.
13-Jun-2007 12 Change values ΔIADJ and VREF test condition of IO = 10 mA to IMAX ==> 
IO = 10 mA to 500 mA on Ta bl e 5 .
23-Nov-2007 13 Added Ta b le 1 .
06-Feb-2008 14 Added: TO-220 mechanical data Figure 14 on page 14 and Table 6 on 
page 13.
02-Mar-2010 15 Added: notes Figure 14 on page 14, Figure 15 on page 15, Figure 16 and 
Figure 17 on page 16.
17-Nov-2010 16 Modified: RthJC value for TO-220 Table 3 on page 4.
18-Nov-2011 17 Added order code LM317T-DG Table1 on page1.

LM117, LM217, LM317

Doc ID 2154 Rev 17 25/25

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the

right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any

time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no

liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this

document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products

or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such

third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS

OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT

RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING

APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,

DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE

GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void

any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any

liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America