D Series High Voltage relays 10kV & 15kV 10kV or 15kV Isolation Low Contact Resistance PCB or Panel Mount HV connections via Flying Leads, Solder Turret (wire wrap), or 1/4" Spade Terminals Excellent AC characteristics Contact Specification Unit Condition Contact Material Isolation across contacts kV Switching Power Max. W Switching Voltage Max. V Switching Current Max. A Carry Current Max A Capacitance across pF contacts Lifetime operations Very high isolation voltages, up to 15kV, are achieved through the use of high vacuum reed switches with either Rhodium or Tungsten contacts and make these relays suitable for high reliability applications, such as cardiac defibrillators, test equipment and high voltage power supplies. The Rhodium contact relays have low contact resistance, while the Tungsten contact relays can switch higher voltages. PCB or Panel Mount, via Nylon studs, versions are available. Connection options, for the HV, include PCB, solder turret(wire wrap), flying lead and 0.25" spade terminals. Contact Resistance Insulation Resistance Coil Specification Must Operate Voltage Must Release Voltage Operate Time Release Time Resistance Relay Specification DC or AC peak DC or AC peak DC or AC peak coil to screen grounded dry switching 50W switching mW max (typical) W min (typical) V DC V DC ms diode fitted ms diode fitted W Isolation contact/coil kV Insulation resistance contact to all terminals W min (typical) Envirnonmental Operating Temp range C Rhodium 10 50 1000 3 4 <0.2 10kV SPNC Tunsten 10 50 7000 2 3 <0.2 15kV SPNO Rhodium Tungsten 10 10 50 50 1000 7000 3 2 4 3 <0.2 <0.2 109 109 109 109 6 6 6 10 10 10 106 50 (15) 250(100) 50 (15) 250(100) 1010 (1013) 1010 (1013) 5V 12V 24V 5V 12V 24V 3.7 0.5 3.0 2.0 28 9 1.25 3.0 2.0 150 20 4 3.0 2.0 780 3.7 0.5 2.0 3.0 38 17 9 1.25 2.0 3.0 240 20 4 2.0 3.0 925 17 1010 (1013) 1010 (1013) -20 to +70 -20 to +70 Tungsten 15 50 10000 2 2 <0.2 109 106 250 (100) 1010 (1013) 5V 12V 24V 3.7 0.5 3.0 2.0 16 9 1.25 3.0 2.0 95 20 4 3.0 2.0 350 17 1010 (1013) -20 to +70 Part Numbering System D A T 7 12 10 F Reed Switch Size Contact Form A=n/o, B=n/c Contact Material R=Rhodium, T=Tungsten Moulding Ref. No. Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 DC or AC peak 10kV SPNO Coil Voltage 05=5Vdc, 12=12Vdc, 24=24Vdc Isolation between Contacts 3=3kV, 5=5kV, 10=10kV, 15=15kV Mounting or Connection Style No suffix indicates PCB mount F=PCB mount & coil connection with Flying lead HV connection P=Panel mount with wire wrap terminals S=PCB mount & coil connection with stud fixing & 1/4" spade HV connection (not available on 15kV models) T=PCB mount & coil connection with stud fixing & wire wrap HV connection Email:sales@cynergy3.com ISO9001 C E R T I F I E D www.cynergy3.com (c) 2013 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. MECHANICAL PANEL MOUNT STANDARD (e.g. DAT71210) 15.8 (0.62") 60.0 (2.36") CIRCUIT DIAGRAMS (ALL VARIANTS) (e.g. DAT71210P) 1 18.5 FORM A (NO) (0.73") 3 1 2 4.0 4 (0.15") 4 Pins 0.635(0.025") Square 5.1 FORM B (NC) (0.2") 3 3 10.2 1 2 2 1 4+ 4 (0.4") 25.4 (1.0") 50.8 NOTE: COIL POLARITY IS IMPORTANT (2.0") FOR FORM B VARIANT ONLY. 6.3 (0.25") 4 3 2 9.5 (0.37") 25.4 (1.0") 50.8 (2.0") 2 Mounting Studs 4BA Complete with Nuts, Nylon 66 FLYING LEAD TURRET (Wire Wrap) (e.g. DAT71210F) (e.g. DAT71210T) 10.0 (0.39") ~300 50.8 (2.0") 1 13.0 2 6.3 (0.25") 4 Pins 0.635(0.025") Square 50.8 (2.0") 3 4 4 SPADE TYPE 2 4 Pins 0.635(0.025") Square 3 NOTE: PINS WHICH ARE NOT NUMBERED HAVE NO ELECTRICAL CONNECTION. NOTE: PINS WHICH ARE NOT NUMBERED HAVE NO ELECTRICAL CONNECTION. 'S' Suffix denotes the 0.250" 'Push On' blade connectors, 4BA fixing bolts and Epoxy potting. (e.g. DAT71210S) 15.8 1 2 1 60.0 48.00 11.60 11.0 18.5 30.0 max + 50.80 25.40 10.16 5.08 3 4 ISO9001 C E R T I F I E D 4.0 - 1 9.00+-1 2 Pins 0.635(0.025") Square 2 Mounting Studs 4BA complete with nuts, Nylon 66. Requires 2x holes minimum 4.0mm. www.cynergy3.com (c) 2012 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.