LM317AHV
2
Absolute Maximum Ratings
Electrical Characteristics
(VI-VO=5V, IO= 0.5A, 0°C ≤ TJ ≤ + 125°C, IMAX = 1.5A, PDMAX = 20W, unless othe rwis e sp ecif ied )
Note :
1. Load and line re gulation are specified at constant junction temperature. Change in VD du e to heating effects must be taken
into account separately. Pulse testing with low duty is used. (PMAX = 20W)
2. CADJ, when used, is connected between the adjustment pin and ground.
Parameter Symbol Value Unit
Input-Output Voltage Differential VI - VO60 V
Lead Temperature TLEAD 230 °C
Power Dissipation PDInternally limited W
Operating Junction Temperature Range Tj0 ~ +125 °C
Storage Temperature Range TSTG -65 ~ +125 °C
Temperature Coefficient of Output Voltage ΔVo/ΔT ±0.02 %/°C
Parameter Symbol Conditions Min. Typ. Max. Unit
Line Regulation (Note1) Rline TA = +25°C
3V ≤ VI - VO ≤ 60V - 0.01 0.04 %/V
3V ≤ VI - VO ≤ 60V - 0.02 0.07 %/V
Load Regulation (Note1) Rload
TA = +25°C, 10mA ≤IO ≤IMAX
VO< 5V
VO ≥ 5V -
-18
0.4 25
0.5 mV
%/VO
10mA ≤ IO ≤ IMAX
VO < 5V
VO ≥ 5V -
-40
0.8 70
1.5 mV
%/VO
Adjustable Pin Current IADJ --46100μA
Adjustable Pin Current Change ΔIADJ 3V ≤ VI - VO ≤60V
10mA ≤ IO ≤ IMAX, PD ≤ PMAX -2.05 μA
Reference Volt ag e VREF 3V ≤ VIN - VO ≤60V
10mA ≤ IO ≤ IMAX, PD ≤ PMAX 1.20 1.25 1.30 V
Temperature Stability STT--0.7-%/V
O
Minimum Load Current to Maintain
Regulation IL(MIN) VI - VO = 60V - 3.5 12 mA
Maximum Output Current IO(MAX) VI - VO ≤ 15V, PD ≤ PMAX
VI - VO ≤ 60V, PD ≤ PMAX
TA = 25°C
1.0
-2.2
0.3 -
-A
A
RMS Noise, % of VOUT eNTA= +25°C, 10Hz ≤ f ≤ 10kHz - 0.003 0.01 %/VO
Ripple Rejection RR VO = 10V, f = 120Hz
without CADJ
CADJ = 10μF (Note2) -
66 60
75 -
-dB
dB
Long-Term Stability, TJ = THIGH ST TA = +25°C for end point
measurements, 1000HR -0.31 %
Thermal Resistance Junction to Case RθJC --5-°C/W