Thick Film Resistor Networks
Flat Pack, 11, 12 Schematics
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31513
328 Revision: 08-Sep-04
DFP
Vishay Dale
FEATURES
•11 and 12 Schematics
•0.065" [1.65 mm] height for high density packaging
•Low temperature coefficient (- 55 °C to + 125 °C)
± 100 ppm/°C
•Hot solder dipped leads
•Highly stable thick film
•Wide resistance range
•All devices are capable of passing the MIL-STD-202,
Method 210, Condition C "Resistance to Soldering Heat"
test
Notes
1. Temperature Range: - 55 °C to + 125 °C
2. ± 1 % and ± 5 % tolerance available
• Consult factory for stocked values
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
POWER RATING
CIRCUIT
SCHEMATIC
LIMITING ELEMENT
VOLTAGE
MAX.
V≅
TEMPERATURE
1)
COEFFICIENT
ppm/°C
STANDARD
2)
TOLERANCE
%
RESISTANCE
RANGE
Ω
TEMPERATURE
COEFFICIENT
TRACKING
ppm/°C
P
25 °C
ELEMENT
W
P
25 °C
PACKAGE
W
DFP 0.25
0.15
0.65
0.65
11
12
75
75
± 100
± 100
2
2
10 - 1M
10 - 1M
50
50
TECHNICAL SPECIFICATIONS
11 Schematic 7 or 8 isolated resistors
The DFPxx11 provides the user with 7 or 8 nominally equal resistors with
each resistor isolated from all others. Commonly used in the following
applications:
• "Wired OR" Pull-up • Long-line Impedance Balancing
• Power Driven Pull-up • LED Current Limiting
• Power Gate Pull-up • ECL Output Pull-down
• Line Termination • TTL Input Pull-down
12 Schematic 13 or 15 resistors with one pin common
The DFPxx12 provides the user with a choice of 13 or 15 nominally equal
resistors, each connected to a common pin (14 or 16). Commonly used in
the following applications:
• MOS/ROM Pull-up/Pull-down • TTL Input Pull-down
• Open Collector Pull-up • Digital Pulse Squaring
• "Wired OR" Pull-up • TTL Unused Gate Pull-up
• Power Driven Pull-up • High Speed Parallel Pull-up
Pin #1
DFP1411
DFP1611
•••••
•
••
Pin #1
DFP1412
DFP1612
DFP14121K00GD05
DFP 14 12 102 G D05
HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING
Historical Part Number example: DFP1412102G (will continue to be accepted)
New Global Part Numbering: DFP14121K00GD05 (preferred part numbering format)
GLOBAL MODEL PIN COUNT SCHEMATIC RESISTANCE TOLERANCE PACKAGING SPECIAL
VALUE CODE
DFP 14 11 = Isolated R = Decimal F = ± 1 %
G = ± 2 %
J = ± 5 %
E05 = Lead (Pb)-free, Tube Blank = Standard
16 12 = Bussed K = Thousand D05 = Tin/Lead, Tube (Dash Number)
M = Million )stigid 3 ot pu(
10R0 = 10 ΩFrom 1-999
680K = 680 kΩas applicable
1M00 = 1.0 MΩ
GLOBAL PART NUMBER INFORMATION
Document Number: 31513 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 08-Sep-04 329
DFP
Thick Film Resistor Networks
Flat Pack, 11, 12 Schematics Vishay Dale
DIMENSIONS in inches [millimeters]
GLOBAL MODEL DIMENSION A
DFP14 0.037 ± 0.010 [0.94 ± 0.25]
DFP16 0.012 ± 0.010 [0.30 ± 0.25]
Pin #1
0.050
[1.27]
Typ.
0.019 ± 0.006
[0.48 ± 0.15] 0.265 [6.73] Max.
0.365 [9.27] Min.
0.385 [9.78] Max.
0.250 [6.35]
Min. 0.250 [6.35]
Min.
0.065
[1.65]
Max.
0.825 [20.96]
Max.
0.005 + 0.004
- 0.002
[0.127 + 0.102
- 0.051]
TECHNICAL SPECIFICATIONS
PARAMETER UNIT DFP14/16
Isolation Resistance 11 Schematic MΩ> 100
Voltage Coefficient of Resistance ppm/V < 50 typical
Maximum Operating Voltage VDC 75
Operating Temperature Range °C - 55 to + 125
Storage Temperature Range °C - 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Model number, schematic number, value
tolerance, pin 1 indicator, date code.
Marking Resistance
to Solvents
Permanency testing per MIL-STD-202
Method 215.
Solderability Per MIL-STD-202, Method 208E.
Terminals Per MIL-STD-1276 DFPxx11, DFPxx12 =
Type G (hot solder dipped). Hot solder
dipped leads supplied as standard finish.
Body Epoxy filled ceramic sandwich
11 Schematic
Derating
- 55 + 25 + 70 + 125 + 150
0.65
0.50
0.25
Power Rating (Watts)
Ambient Temperature °C
Package
Single Resistor
12 Schematic
- 55 + 25 + 70 + 125 + 150
0.65
0.50
0.15
Package
Single Resistor
Derating
Power Rating (Watts)
Ambient Temperature °C
PERFORMANCE
TEST CONDITIONS
MAX.
Δ
R (Typical Test Lots)
Power Conditioning 1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF”
for 100 hours ± 4 hours at + 25 °C ambient temperature ± 0.50 % ΔR
Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR
Short Time Overload 2.5 x rated working voltage, 5 seconds ± 0.25 % ΔR
Low Temperature Operation 45 minutes at full rated working voltage at - 65 °C ± 0.25 % ΔR
Moisture Resistance 240 hours with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR
Resistance to Soldering Heat Leads immersed in + 260 ° ΔC solder to within 1/16" of body for 10 seconds ± 0.25 % ΔR
Shock Total of 18 shocks at 100 g's ± 0.25 % ΔR
Vibration 12 hours at maximum of 20 g's between 10 and 2000 Hz ± 0.25 % ΔR
Load Life 1000 hours at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF”
for full 1000 hour period. Derated according to the curve. ± 0.50 % ΔR
Terminal Strength 1.5 pound pull for 30 seconds ± 0.25 % ΔR
Insulation Resistance 10 000 Megohm (minimum) -
Dielectric Withstanding
Voltage No evidence of arcing or damage (200 V RMS for 1 minute) -
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
