DA C8 82 2 DAC8822 SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 16-Bit, Dual, Parallel Input, Multiplying Digital-to-Analog Converter FEATURES * * * * * * * * * * * * * * * * * DESCRIPTION 0.5LSB DNL 1LSB INL Low Noise: 12nV/Hz Low Power Operation: IDD = 1A per Channel at 2.7V 2mA Full-Scale Current, with VREF = 10V Settling Time: 0.5s 16-Bit Monotonic 4-Quadrant Multiplying Reference Inputs Reference Bandwidth: 10MHz Reference Input: 18V Reference Dynamics: -105 THD Midscale or Zero Scale Reset Analog Power Supply: +2.7V to +5.5V TSSOP-38 Package Industry-Standard Pin Configuration Pin-Compatible with the 14-Bit DAC8805 Temperature Range: -40C to +125C The DAC8822 dual, multiplying digital-to-analog converter (DAC) is designed to operate from a single 2.7V to 5.5V supply. The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external, current-to-voltage (I/V) precision amplifier. A RSTSEL pin allows system reset assertion (RS) to force all registers to zero code when RSTSEL = '0', or to midscale code when RSTSEL = '1'. Additionally, an internal power-on reset forces all registers to zero or midscale code at power-up, depending on the state of the RSTSEL pin. A parallel interface offers high-speed communications. The DAC8822 is packaged in a space-saving TSSOP-38 package and has an industry-standard pinout. The device is specified from -40C to +125C. For a 14-bit, pin-compatible version, see the DAC8805. APPLICATIONS * * * * Automatic Test Equipment Instrumentation Digitally Controlled Calibration Industrial Control PLCs DGND VDD R1A R1A D0 D15 WR RCOMA Parallel Bus Interface VREFA ROFSA R2A ROFSA DAC A Register Input A Register RFBA RFBA DAC A IOUTA AGNDA A0 A1 DAC B Register Input B Register DAC B IOUTB RS LDAC Control Logic RSTSEL AGNDB R1B Power-On Reset R1B R2B RCOMB ROFSB VREFB ROFSB RFBB RFBB Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2006-2007, Texas Instruments Incorporated DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. ORDERING INFORMATION (1) (1) PRODUCT RELATIVE ACCURACY (LSB) DIFFERENTIAL NONLINEARITY (LSB) PACKAGE-LEAD (DESIGNATOR) SPECIFIED TEMPERATURE RANGE PACKAGE MARKING DAC8822QB 2 1 TSSOP-38 (DBT) -40C to +125C DAC8822 DAC8822QC 1 1 TSSOP-38 (DBT) -40C to +125C DAC8822 For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) (1) VDD to GND UNIT -0.3 to +7 V Digital input voltage to GND -0.3 to +VDD + 0.3 V V (IOUT) to GND -0.3 to +VDD + 0.3 V 25 V Operating temperature range -40 to +125 C Storage temperature range -65 to +150 C +150 C REF, ROFS, RFB, R1, RCOM to AGND, DGND Junction temperature range (TJ max) Power dissipation (TJ max - TA) / RJA W 53 C/W Human Body Model (HBM) 4000 V Charged Device Model (CDM) 500 V Thermal impedance, RJA ESD rating (1) 2 DAC8822 Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum conditions for extended periods may affect device reliability. Submit Documentation Feedback DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 ELECTRICAL CHARACTERISTICS All specifications at TA = -40C to +125C, VDD = +2.7V to +5.5V, IOUT = virtual GND, GND = 0V, and VREF = 10V, unless otherwise noted. DAC8822 PARAMETER CONDITIONS MIN TYP MAX UNITS STATIC PERFORMANCE Resolution 16 Relative accuracy INL Differential nonlinearity Bits DAC8822QB 2 LSB DAC8822QC 1 LSB 1 LSB nA 0.5 DNL Output leakage current Data = 0000h, TA = +25C 10 Output leakage current Data = 0000h, Full temperature range 20 nA mV Full-scale gain error Unipolar, data = FFFFh 1 4 Bipolar, data = FFFFh 1 4 mV 1 2 ppm/C TA = +25C 1 3 mV Full temperature range 1 3 mV 0.2 1.0 LSB/V Full-scale temperature coefficient Bipolar zero error Power-supply rejection ratio PSRR VDD = 5V 10% OUTPUT CHARACTERISTICS (1) Output current Output capacitance Code dependent 2 mA 50 pF REFERENCE INPUT Reference voltage range VREF -18 Input resistance (unipolar) RREF 4 Input capacitance 18 V 6 k 5 R1, R2 Feedback and offset resistance LOGIC INPUTS AND 5 pF 4 5 6 k 8 10 12 k VIL VDD = +2.7V 0.6 V VIL VDD = +5V 0.8 V ROFS, RFB OUTPUT (1) Input low voltage Input high voltage Input leakage current Input capacitance VIH VDD = +2.7V 2.1 VIH VDD = +5V 2.4 IIL V V 0.001 CIL 1 A 8 pF POWER REQUIREMENTS Supply voltage VDD 2.7 5.5 V 3 6 A IDD VDD = +4.5V to +5.5V, VIH = VDD and VIL = GND 3 6 A VDD = +2.7V to +3.6V, VIH = VDD and VIL = GND 1 3 A Normal operation, logic inputs = 0V Supply current AC CHARACTERISTICS (1) (2) Output current settling time Reference multiplying BW To 0.0015% of full-scale, data = 0000h to FFFFh to 0000h 0.5 s BW - 3dB VREF = 5VPP, data = FFFFh, 2-quadrant mode 10 MHz VREF = 0V to 10V, data = 7FFFh to 8000h to 7FFFh 5 nV-s -70 dB -100 dB 1 nV-s -105 dB 12 nV/Hz tS DAC glitch impulse Feedthrough error Crosstalk error Digital feedthrough Total harmonic distortion Output noise density (1) (2) VOUT/VREF Data = 0000h, VREF = 100kHz, 10VPP, 2-quadrant mode VOUTA/VREFB Data = 0000h, VREFB = 100mVRMS, f = 100kHz LDAC = logic low, VREF = -10V to + 10V Any code change THD VREF = 6VRMS, data = FFFFh, f = 1kHz eN f = 1kHz, BW = 1Hz, 2-quadrant mode Specified by design and characterization; not production tested. All ac characteristic tests are performed in a closed-loop system using a THS4011 I-to-V converter amplifier. Submit Documentation Feedback 3 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 PIN ASSIGNMENTS DBT PACKAGE TSSOP-38 (TOP VIEW) 4 D1 1 38 D2 D0 2 37 D3 ROFSA 3 36 D4 RFBA 4 35 D5 R1A 5 34 D6 RCOMA 6 33 D7 VREFA 7 32 D8 IOUTA 8 31 D9 AGNDA 9 30 D10 DGND 10 29 VDD AGNDB 11 28 D11 IOUTB 12 27 D12 VREFB 13 26 D13 RCOMB 14 25 D14 R1B 15 24 D15 RFBB 16 23 RS ROFSB 17 22 RSTSEL WR 18 21 LDAC A0 19 20 A1 DAC8822 Submit Documentation Feedback DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 PIN ASSIGNMENTS (continued) Table 1. TERMINAL FUNCTIONS PIN # NAME DESCRIPTION 1, 2, 24-28, 30-38 D0-D15 Digital Input Data Bits D0 to D15. Signal level must be VDD +0.3V. D15 is MSB. 3 ROFSA Bipolar Offset Resistor A. Accepts up to 18V. In 2-quadrant mode, ROFSA ties to RFBA. In 4-quadrant mode, ROFSA ties to R1A and the external reference. 4 RFBA Internal Matching Feedback Resistor A. Connects to the external op amp for I-V conversion. 5 R1A 4-Quadrant Resistor. In 2-quadrant mode, R1A shorts to the VREFA pin. In 4-quadrant mode, R1A ties to ROFSA and the reference input. 6 RCOMA Center Tap Point of the Two 4-Quadrant Resistors, R1A and R2A. In 2-quadrant mode, RCOMA shorts to the VREF pin. In 4-quadrant mode, RCOMA ties to the inverting node of the reference amplifier. 7 VREFA DAC A Reference Input in 2-Quadrant Mode, R2 Terminal in 4-Quadrant Mode. In 2-quadrant mode, VREFA is the reference input with constant input resistance versus code. In 4-quadrant mode, VREFA is driven by the external reference amplifier. 8 IOUTA DAC A Current Output. Connects to the inverting terminal of external precision I-V op amp for voltage output. 9 AGNDA DAC A Analog Ground. 10 DGND 11 AGNDB Digital Ground. 12 IOUTB DAC B Current Output. Connects to the inverting terminal of external precision I-V op amp for voltage output. 13 VREFB DAC B Reference Input in 2-Quadrant Mode, R2 Terminal in 4-Quadrant Mode. In 2-quadrant mode, VREFB is the reference input with constant input resistance versus code. In 4-quadrant mode, VREFB is driven by the external reference amplifier. 14 RCOMB Center Tap Point of the Two 4-Quadrant Resistors, R1B and R2B. In 2-quadrant mode, RCOMB shorts to the VREF pin. In 4-quadrant mode, RCOMB ties to the inverting node of the reference amplifier. 15 R1B 4-Quadrant Resistor. In 2-quadrant mode, R1B shorts to the VREFB pin. In 4-quadrant mode, R1B ties to ROFSB and the reference input. 16 RFBB Internal Matching Feedback Resistor B. Connects to external op amp for I-V conversion. 17 ROFSB Bipolar Offset Resistor B. Accepts up to 18V. In 2-quadrant mode, ROFSB ties to RFBB. In 4-quadrant mode, ROFSB ties to R1B and the external reference. 18 WR Write Control Digital Input In, Active Low. WR enables input registers. Signal level must be VDD + 0.3V. 19 A0 Address 0. Signal level must be VDD + 0.3V. 20 A1 Address 1. Signal level must be VDD + 0.3V. 21 LDAC 22 RSTSEL 23 RS Reset. Active low resets both input and DAC registers. Resets to zero-scale if RSTSEL= 0, and to midscale if RSTSEL = 1. Signal level must be equal to or less than VDD + 0.3 V. 29 VDD Positive Power Supply Input. The specified range of operation is 2.7V to 5.5V. DAC B Analog Ground. Digital Input Load DAC Control. Signal level must be VDD + 0.3V. See the Function of Control Inputs table for details. Power-On Reset State. RSTSEL = 0 corresponds to zero-scale reset. RSTSEL = 1 corresponds to midscale reset. The signal level must be VDD + 0.3V. Submit Documentation Feedback 5 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 TIMING AND FUNCTIONAL INFORMATION tWR WR A0/1 tAS tAH DATA tDS tDH tLWD LDAC tLDAC tRST RS Figure 1. Timing Diagram TIMING CHARACTERISTICS All specifications at TA = -40C to +125C, IOUT = virtual GND, GND = 0V, and VREF = 10V, unless otherwise noted DAC8822 PARAMETER Data to WR setup time A0/1 to WR setup time Data to WR hold time A0/1 to WR hold time WR pulse width LDAC pulse width RS pulse width WR to LDAC delay time 6 tDS tAS tDH tAH tWR tLDAC tRST tLWD CONDITIONS MIN VDD = +5.0V 10 ns VDD = +2.7V 10 ns VDD = +5.0V 10 ns VDD = +2.7V 10 ns VDD = +5.0V 0 ns VDD = +2.7V 0 ns VDD = +5.0V 0 ns VDD = +2.7V 0 ns VDD = +5.0V 10 ns VDD = +2.7V 10 ns VDD = +5.0V 10 ns VDD = +2.7V 10 ns VDD = +5.0V 10 ns VDD = +2.7V 10 ns VDD = +5.0V 0 ns VDD = +2.7V 0 ns Submit Documentation Feedback TYP MAX UNITS DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 Table 2. Address Decoder Pins A1 A0 0 0 OUTPUT UPDATE DAC A 0 1 None 1 0 DAC A and DAC B 1 1 DAC B Table 3. Function of Control Inputs CONTROL INPUTS RS WR LDAC REGISTER OPERATION 0 X X Asynchronous operation. Reset the input and DAC register to '0' when the RSTSEL pin is tied to DGND, and to midscale when RSTSEL is tied to VDD. 1 0 0 Load the input register with all 16 data bits. 1 1 1 Load the DAC register with the contents of the input register. 1 0 1 The input and DAC register are transparent. LDAC and WR are tied together and programmed as a pulse. The 16 data bits are loaded into the input register on the falling edge of the pulse and then loaded into the DAC register on the rising edge of the pulse. 1 1 1 0 No register operation. Submit Documentation Feedback 7 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 TYPICAL CHARACTERISTICS: VDD = +5V Channel A LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 1.0 TA = +25C 0.8 0.6 0.6 0.4 0.4 0.2 0 -0.2 0 -0.2 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 0 1.0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 2. Figure 3. LINEARITY ERROR vs DIGITAL INPUT CODE DIFFERENTIAL LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 TA = -40C 0.8 TA = -40C 0.8 0.6 0.6 0.4 0.4 DNL (LSB) INL (LSB) 0.2 -0.4 -1.0 0.2 0 -0.2 0.2 0 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 -1.0 0 1.0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 4. Figure 5. LINEARITY ERROR vs DIGITAL INPUT CODE DIFFERENTIAL LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 TA = +125C 0.8 TA = +125C 0.8 0.6 0.6 0.4 0.4 DNL (LSB) INL (LSB) TA = +25C 0.8 DNL (LSB) INL (LSB) DIFFERENTIAL LINEARITY ERROR vs DIGITAL INPUT CODE 0.2 0 -0.2 0.2 0 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 -1.0 0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 Figure 6. 8 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 7. Submit Documentation Feedback DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 TYPICAL CHARACTERISTICS: VDD = +5V (continued) Channel B DIFFERENTIAL LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 1.0 TA = +25C 0.8 0.6 0.6 0.4 0.4 0.2 0 -0.2 0 -0.2 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 0 1.0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 8. Figure 9. DIFFERENTIAL LINEARITY ERROR vs DIGITAL INPUT CODE DIFFERENTIAL LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 TA = -40C 0.8 TA = -40C 0.8 0.6 0.6 0.4 0.4 DNL (LSB) INL (LSB) 0.2 -0.4 -1.0 0.2 0 -0.2 0.2 0 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 -1.0 0 1.0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 10. Figure 11. DIFFERENTIAL LINEARITY ERROR vs DIGITAL INPUT CODE DIFFERENTIAL LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 TA = +125C 0.8 TA = +125C 0.8 0.6 0.6 0.4 0.4 DNL (LSB) INL (LSB) TA = +25C 0.8 DNL (LSB) INL (LSB) DIFFERENTIAL LINEARITY ERROR vs DIGITAL INPUT CODE 0.2 0 -0.2 0.2 0 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 -1.0 0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 Figure 12. 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 13. Submit Documentation Feedback 9 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 TYPICAL CHARACTERISTICS: VDD = +5V (continued) MIDSCALE DAC GLITCH MIDSCALE DAC GLITCH Output Voltage (50mV/div) VREF = +10V Output Voltage (50mV/div) VREF = +10V Code: 7FFFh to 8000h LDAC Pulse LDAC Pulse Time (0.2ms/div) Time (0.2ms/div) Figure 14. Figure 15. FULL-SCALE ERROR vs TEMPERATURE BIPOLAR-ZERO ERROR vs TEMPERATURE 3 4 3 2 Bipolar-Zero Error (mV) Full-Scale Error (mV) Code: 8000h to 7FFFh 2 1 DAC A 0 -1 -2 DAC B DAC A 1 0 -1 DAC B -2 -3 -3 -4 -50 -30 -10 10 30 50 70 90 110 130 -50 -30 Figure 16. 10 -10 10 30 50 Temperature (C) Temperature (C) Figure 17. Submit Documentation Feedback 70 90 110 130 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 TYPICAL CHARACTERISTICS: VDD = +2.7V Channel A LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 1.0 TA = +25C 0.8 0.6 0.6 0.4 0.4 0.2 0 -0.2 0 -0.2 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 0 1.0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 18. Figure 19. LINEARITY ERROR vs DIGITAL INPUT CODE LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 TA = -40C 0.8 TA = -40C 0.8 0.6 0.6 0.4 0.4 DNL (LSB) INL (LSB) 0.2 -0.4 -1.0 0.2 0 -0.2 0.2 0 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 -1.0 0 1.0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 20. Figure 21. LINEARITY ERROR vs DIGITAL INPUT CODE LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 TA = +125C 0.8 TA = +125C 0.8 0.6 0.6 0.4 0.4 DNL (LSB) INL (LSB) TA = +25C 0.8 DNL (LSB) INL (LSB) LINEARITY ERROR vs DIGITAL INPUT CODE 0.2 0 -0.2 0.2 0 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 -1.0 0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 Figure 22. 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 23. Submit Documentation Feedback 11 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 TYPICAL CHARACTERISTICS: VDD = +2.7V (continued) Channel B LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 1.0 TA = +25C 0.8 0.6 0.6 0.4 0.4 0.2 0 -0.2 0 -0.2 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 0 1.0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 24. Figure 25. LINEARITY ERROR vs DIGITAL INPUT CODE LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 TA = -40C 0.8 TA = -40C 0.8 0.6 0.6 0.4 0.4 DNL (LSB) INL (LSB) 0.2 -0.4 -1.0 0.2 0 -0.2 0.2 0 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 -1.0 0 1.0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 26. Figure 27. LINEARITY ERROR vs DIGITAL INPUT CODE LINEARITY ERROR vs DIGITAL INPUT CODE 1.0 TA = +125C 0.8 TA = +125C 0.8 0.6 0.6 0.4 0.4 DNL (LSB) INL (LSB) TA = +25C 0.8 DNL (LSB) INL (LSB) LINEARITY ERROR vs DIGITAL INPUT CODE 0.2 0 -0.2 0.2 0 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 -0.8 -1.0 -1.0 0 8192 16384 24576 32768 40960 49152 57344 65535 Code 0 Figure 28. 12 8192 16384 24576 32768 40960 49152 57344 65535 Code Figure 29. Submit Documentation Feedback DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 TYPICAL CHARACTERISTICS: VDD = +2.7V (continued) MIDSCALE DAC GLITCH MIDSCALE DAC GLITCH Output Voltage (50mV/div) VREF = +10V Output Voltage (50mV/div) VREF = +10V Code: 7FFFh to 8000h Code: 8000h to 7FFFh LDAC Pulse LDAC Pulse Time (0.2ms/div) Time (0.2ms/div) Figure 30. Figure 31. FULL-SCALE ERROR vs TEMPERATURE BIPOLAR-ZERO ERROR vs TEMPERATURE 3 4 2 Bipolar-Zero Error (mV) Full-Scale Error (mV) 3 2 1 DAC A 0 -1 -2 DAC B DAC A 1 0 -1 DAC B -2 -3 -3 -4 -50 -30 -10 10 30 50 70 90 110 130 -50 -30 -10 10 30 50 70 90 110 130 Temperature (C) Temperature (C) Figure 32. Figure 33. Submit Documentation Feedback 13 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 TYPICAL CHARACTERISTICS: VDD = +2.7V and +5V SUPPLY CURRENT vs LOGIC INPUT VOLTAGE REFERENCE MULTIPLYING BANDWIDTH UNIPOLAR MODE 180 6 0 -6 -12 -18 -24 -30 -36 -42 -48 -54 -60 -66 -72 -78 -84 -90 -96 -102 -108 -114 VDD = +5.0V 140 0xFFFF 0x8000 0x4000 0x2000 0x1000 0x0800 0x0400 0x0200 0x0100 0x0080 0x0040 0x0020 0x0010 0x0008 0x0004 0x0002 0x0001 Attenuation (dB) Supply Current, IDD (mA) 160 120 100 80 60 40 VDD = +2.7V 20 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0x0000 10 100 1k Logic Input Voltage (V) 100k 1M 10M 100M Figure 34. Figure 35. REFERENCE MULTIPLYING BANDWIDTH BIPOLAR MODE REFERENCE MULTIPLYING BANDWIDTH BIPOLAR MODE DAC 0V output limited by bipolar zero error to -96dB typical (-76dB max). Codes from Midscale to Positive Full-Scale 100 1k 10k 100k 1M 10M 0xFFFF 0xC000 0xA000 0x9000 0x8800 0x8400 0x8200 0x8100 0x8080 0x8040 0x8020 0x8010 0x8008 0x8004 0x8002 0x8001 0x8000 100M 6 0 -6 -12 -18 -24 -30 -36 -42 -48 -54 -60 -66 -72 -78 -84 -90 -96 -102 -108 -114 Attenuation (dB) Attenuation (dB) 6 0 -6 -12 -18 -24 -30 -36 -42 -48 -54 -60 -66 -72 -78 -84 -90 -96 -102 -108 -114 10 10k Bandwidth (Hz) DAC 0V output limited by bipolar zero error to -96dB typical (-76dB max). Codes from Negative Full-Scale to Midscale 10 100 Bandwidth (Hz) 1k 10k 100k 1M 10M 100M Bandwidth (Hz) Figure 36. Figure 37. SUPPLY CURRENT vs TEMPERATURE DAC SETTLING TIME Output Voltage (5V/div) Supply Current, IDD (mA) 6 5 VDD = 5.0V 4 3 VDD = 2.7V 2 Unipolar Mode Voltage Output Settling Trigger Pulse 1 0 -50 -30 -10 10 30 50 70 90 110 130 Time (0.5ms/div) Temperature (C) Figure 38. 14 Figure 39. Submit Documentation Feedback 0x0000 0x4000 0x6000 0x7000 0x7800 0x7C00 0x7E00 0x7F00 0x7F80 0x7FC0 0x7FE0 0x7FF0 0x7FF8 0x7FFC 0x7FFE 0x7FFF 0x8000 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 THEORY OF OPERATION The DAC8822 is a multiplying, dual-channel, current output, 16-bit DAC. The architecture, illustrated in Figure 40, is an R-2R ladder configuration with the three MSBs segmented. Each 2R leg of the ladder is either switched to GND or to the IOUT terminal. The IOUT terminal of the DAC is held at a virtual GND potential by the use of an external I/V converter op amp. The R-2R ladder is connected to an external reference input (VREF) that determines the DAC full-scale output current. The R-2R ladder presents a code-independent load impedance to the external reference of 5k 25%. The external reference voltage can vary in a range of -18V to +18V, thus providing bipolar IOUT current operation. By using an external I/V converter op amp and the RFB resistor in the DAC8822, an output voltage range of -VREF to +VREF can be generated. R R R VREF 2R 2R 2R 2R 2R 2R 2R 2R 2R 2R 2R 2R RFB IOUT GND Figure 40. Equivalent R-2R DAC Circuit The DAC output voltage is determined by VREF and the digital data (D) according to Equation 1: D V OUT AB + *VREF 65536 (1) Each DAC code determines the 2R-leg switch position to either GND or IOUT. The external I/V converter op amp noise gain will also change because the DAC output impedance (as seen looking into the IOUT terminal) changes versus code. Because of this change in noise gain, the external I/V converter op amp must have a sufficiently low offset voltage such that the amplifier offset is not modulated by the DAC IOUT terminal impedance change. External op amps with large offset voltages can produce INL errors in the transfer function of the DAC8822 because of offset modulation versus DAC code. For best linearity performance of the DAC8822, an op amp (such as the OPA277) is recommended, as shown in Figure 41. This circuit allows VREF to swing from -10V to +10V. VDD U1 VDD ROFS RFB +15V U2 VREF DAC8822 V+ IOUTA/B OPA277 VOUT VGND -15V Figure 41. Voltage Output Configuration Submit Documentation Feedback 15 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 APPLICATION INFORMATION DIGITAL INTERFACE The parallel bus interface of the DAC8822 is comprised of a 16-bit data bus D0--D15, address lines A0 and A1, and a WR control signal. Timing and control functionality are shown in Figure 1, and described in Table 2 and Table 3. The address lines must be set up and stable before the WR signal goes low, to prevent loading improper data to an undesired input register. Both channels of the DAC8822 can be simultaneously updated by control of the LDAC signal, as shown in Figure 1. Reset control (RS) and reset select control (RSTSEL) signals are provided to allow user reset ability to either zero scale or midscale codes of both the input and DAC registers. STABILITY CIRCUIT For a current-to-voltage (I/V) design, as shown in Figure 42, the DAC8822 current output (IOUT) and the connection with the inverting node of the op amp should be as short as possible and laid out according to correct printed circuit board (PCB) layout design. For each code change, there is an output step function. If the gain bandwidth product (GBP) of the op amp is limited and parasitic capacitance is excessive at the inverting node, then gain peaking is possible. Therefore, a compensation capacitor C1 (4pF to 20pF, typ) can be added to the design for circuit stability, as shown in Figure 42. VDD U1 VDD ROFS RFB C1 U2 VREF VREF DAC8822 IOUTA/B OPA277 VOUT GND Figure 42. Gain Peaking Prevention Circuit with Compensation Capacitor 16 Submit Documentation Feedback DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 APPLICATION INFORMATION (continued) BIPOLAR OUTPUT CIRCUIT The DAC8822, as a 4-quadrant multiplying DAC, can be used to generate a bipolar output. The polarity of the full-scale output (IOUT) is the inverse of the input reference voltage at VREF. Using a dual op amp, such as the OPA2277, full 4-quadrant operation can be achieved with minimal components. Figure 43 demonstrates a 10VOUT circuit with a fixed +10V reference. The output voltage is shown in Equation 2: V OUT + D *1 32768 V REF (2) VREF U1 OPA2277 DGND VDD R1A RCOMA R1A DAC8822 VREFA R 2A RFBA ROFSA ROFSA RFBA C1 D0 D15 WR A0 Parallel Bus Interface DAC A Input A Register IOUTA DAC A Register U2 OPA2277 VOUT AGNDA A1 RS LDAC RSTSEL Control Logic Figure 43. Bipolar Output Circuit for Channel A Submit Documentation Feedback 17 DAC8822 www.ti.com SBAS390A - DECEMBER 2006 - REVISED MARCH 2007 APPLICATION INFORMATION (continued) PROGRAMMABLE CURRENT SOURCE CIRCUIT The DAC8822 can be integrated into the circuit in Figure 44 to implement an improved Howland current pump for precise V/I conversions. Bidirectional current flow and high-voltage compliance are two features of the circuit. With a matched resistor network, the load current of the circuit is shown by Equation 3: (R )R 3) R 1 D I LAB + 2 V REF 65536 R3 (3) The value of R3 in the previous equation can be reduced to increase the output current drive of U3. U3 can drive 20mA in both directions with voltage compliance limited up to 15V by the U3 voltage supply. Elimination of the circuit compensation capacitor (C1) in the circuit is not suggested as a result of the change in the output impedance (ZO), according to Equation 4: R1R 3(R1)R 2) ZO + R1(R 2)R 3) * R 1(R2)R 3) (4) As shown in Equation 4, ZO with matched resistors is infinite and the circuit is optimum for use as a current source. However, if unmatched resistors are used, ZO is positive or negative with negative output impedance being a potential cause of oscillation. Therefore, by incorporating C1 into the circuit, possible oscillation problems are eliminated. The value of C1 can be determined for critical applications; for most applications, however, a value of several pF is suggested. R 2 15kW C1 10pF VDD R1 150kW U3 R 3 50W U1 U2 VREF VREF DAC8822 IOUTA/B VOUT OPA2277 C2 10pF VDD ROFS RFB R1 150kW R2 15kW R3 50W IL OPA2277 LOAD GND Figure 44. Programmable Bidirectional Current Source Circuit CROSS-REFERENCE The DAC8822 has an industry-standard pinout. Table 4 provides the cross-reference information. Table 4. Cross-Reference 18 DNL (LSB) SPECIFIED TEMPERATURE RANGE PACKAGE DESCRIPTION PACKAGE OPTION CROSSREFERENCE PART PRODUCT BIT INL (LSB) DAC8822QB 16 2 1 -40C to +125C TSSOP-38 DBT AD5547B DAC8822QC 16 1 1 -40C to +125C TSSOP-38 DBT N/A Submit Documentation Feedback PACKAGE OPTION ADDENDUM www.ti.com 21-May-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) DAC8822QBDBT ACTIVE TSSOP DBT 38 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR DAC8822QBDBTG4 ACTIVE TSSOP DBT 38 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR DAC8822QBDBTR ACTIVE TSSOP DBT 38 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR DAC8822QBDBTRG4 ACTIVE TSSOP DBT 38 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR DAC8822QCDBT ACTIVE TSSOP DBT 38 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR DAC8822QCDBTG4 ACTIVE TSSOP DBT 38 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR DAC8822QCDBTR ACTIVE TSSOP DBT 38 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR DAC8822QCDBTRG4 ACTIVE TSSOP DBT 38 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Samples (Requires Login) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 21-May-2010 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DAC8822QBDBTR TSSOP DBT 38 2000 330.0 16.4 6.9 10.2 1.8 12.0 16.0 Q1 DAC8822QCDBTR TSSOP DBT 38 2000 330.0 16.4 6.9 10.2 1.8 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DAC8822QBDBTR TSSOP DBT 38 2000 367.0 367.0 38.0 DAC8822QCDBTR TSSOP DBT 38 2000 367.0 367.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated