2N6504 Series Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for halfwave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. http://onsemi.com Features *Glass Passivated Junctions with Center Gate Fire for Greater SCRs 25 AMPERES RMS 50 thru 800 VOLTS Parameter Uniformity and Stability *Small, Rugged, Thermowatt Constructed for Low Thermal Resistance, High Heat Dissipation and Durability *Blocking Voltage to 800 Volts *300 A Surge Current Capability *Pb-Free Packages are Available* G A K MARKING DIAGRAM 4 TO-220AB CASE 221A STYLE 3 2N650xG AYWW 1 2 3 x A Y WW G = 4, 5, 7, 8 or 9 = Assembly Location = Year = Work Week = Pb-Free Device PIN ASSIGNMENT 1 Cathode 2 Anode 3 Gate 4 Anode ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet. Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2008 April, 2006 - Rev. 8 1 Publication Order Number: 2N6504/D 2N6504 Series MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Symbol Rating Value Unit *Peak Repetitive Off-State Voltage (Note 1) (Gate Open, Sine Wave 50 to 60 Hz, TJ = 25 to 125C) 2N6504 2N6505 2N6507 2N6508 2N6509 VDRM, VRRM V OnState Current RMS (180 Conduction Angles; TC = 85C) IT(RMS) 25 A Average OnState Current (180 Conduction Angles; TC = 85C) IT(AV) 16 A Peak Nonrepetitive Surge Current (1/2 Cycle, Sine Wave 60 Hz, TJ = 100C) ITSM 250 A Forward Peak Gate Power (Pulse Width 1.0 ms, TC = 85C) PGM 20 W PG(AV) 0.5 W 50 100 400 600 800 Forward Average Gate Power (t = 8.3 ms, TC = 85C) Forward Peak Gate Current (Pulse Width 1.0 ms, TC = 85C) IGM 2.0 A Operating Junction Temperature Range TJ -40 to +125 C Storage Temperature Range Tstg -40 to +150 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. THERMAL CHARACTERISTICS Characteristic Symbol *Thermal Resistance, Junction-to-Case *Maximum Lead Temperature for Soldering Purposes 1/8 in from Case for 10 Seconds Max Unit RqJC 1.5 C/W TL 260 C ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit - - 10 2.0 mA mA VTM - - 1.8 V IGT - 9.0 - 30 75 mA *Gate Trigger Voltage (Continuous dc) (VAK = 12 Vdc, RL = 100 W, TC = -40C) VGT - 1.0 1.5 V Gate NonTrigger Voltage (VAK = 12 Vdc, RL = 100 W, TJ = 125C) VGD 0.2 - - V *Holding Current TC = 25C (VAK = 12 Vdc, Initiating Current = 200 mA, Gate Open) TC = -40C IH - 18 - 40 80 mA *TurnOn Time (ITM = 25 A, IGT = 50 mAdc) tgt - 1.5 2.0 ms TurnOff Time (VDRM = rated voltage) (ITM = 25 A, IR = 25 A) (ITM = 25 A, IR = 25 A, TJ = 125C) tq - 15 35 - - 50 - OFF CHARACTERISTICS *Peak Repetitive Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM, Gate Open) TJ = 25C TJ = 125C IDRM, IRRM ON CHARACTERISTICS *Forward On-State Voltage (Note 2) (ITM = 50 A) *Gate Trigger Current (Continuous dc) (VAK = 12 Vdc, RL = 100 W) TC = 25C TC = -40C ms DYNAMIC CHARACTERISTICS Critical Rate of Rise of OffState Voltage (Gate Open, Rated VDRM, Exponential Waveform) *Indicates JEDEC Registered Data. 2. Pulse Test: Pulse Width 300 ms, Duty Cycle 2%. http://onsemi.com 2 dv/dt V/ms 2N6504 Series Voltage Current Characteristic of SCR + Current Symbol Parameter VDRM Peak Repetitive Off State Forward Voltage IDRM Peak Forward Blocking Current VRRM Peak Repetitive Off State Reverse Voltage IRRM Peak Reverse Blocking Current VTM Peak On State Voltage IH Holding Current Anode + VTM on state IH IRRM at VRRM Reverse Blocking Region (off state) Reverse Avalanche Region + Voltage IDRM at VDRM Forward Blocking Region (off state) 13 0 32 P(AV) , AVERAGE POWER (WATTS) TC , MAXIMUM CASE TEMPERATURE ( C) Anode - 12 0 = CONDUCTION ANGLE 110 10 0 = 30 90 60 90 180 dc 80 = CONDUCTION ANGLE 60 = 30 24 180 90 dc 16 TJ = 125C 8.0 0 0 4.0 8.0 12 16 IT(AV), ONSTATE FORWARD CURRENT (AMPS) 20 0 Figure 1. Average Current Derating 4.0 8.0 12 16 IT(AV), AVERAGE ONSTATE FORWARD CURRENT (AMPS) 20 Figure 2. Maximum On-State Power Dissipation http://onsemi.com 3 2N6504 Series 100 70 50 30 125C 25C 10 7.0 5.0 3.0 2.0 300 I TSM , PEAK SURGE CURRENT (AMP) iF , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 1.0 0.7 0.5 0.3 0.2 0.1 0 0.4 0.8 1.2 1.6 2.0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 2.4 1 CYCLE 275 250 225 TC = 85C f = 60 Hz 200 175 1.0 2.8 2.0 3.0 4.0 6.0 8.0 10 NUMBER OF CYCLES Figure 3. Typical On-State Characteristics r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) SURGE IS PRECEDED AND FOLLOWED BY RATED CURRENT Figure 4. Maximum Non-Repetitive Surge Current 1.0 0.7 0.5 0.3 0.2 ZqJC(t) = RqJC * r(t) 0.1 0.07 0.05 0.03 0.02 0.01 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 50 20 30 t, TIME (ms) 100 Figure 5. Thermal Response http://onsemi.com 4 200 300 500 1.0 k 2.0 k 3.0 k 5.0 k 10 k 2N6504 Series TYPICAL TRIGGER CHARACTERISTICS VGT, GATE TRIGGER VOLTAGE (VOLTS) 1.0 10 1 -40 -25 -10 5 20 35 50 65 80 TJ, JUNCTION TEMPERATURE (C) 95 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 -40 -25 -10 110 125 5 20 35 65 80 95 Figure 7. Typical Gate Trigger Voltage versus Junction Temperature 100 10 1 -40 -25 -10 50 TJ, JUNCTION TEMPERATURE (C) Figure 6. Typical Gate Trigger Current versus Junction Temperature IH , HOLDING CURRENT (mA) I GT, GATE TRIGGER CURRENT (mA) 100 5 20 35 50 65 80 95 TJ, JUNCTION TEMPERATURE (C) Figure 8. Typical Holding Current versus Junction Temperature http://onsemi.com 5 110 125 110 125 2N6504 Series ORDERING INFORMATION Device Package 2N6504 TO-220AB 2N6504G TO-220AB (Pb-Free) 2N6505 TO-220AB 2N6505G TO-220AB (Pb-Free) 2N6505T TO-220AB 2N6505TG TO-220AB (Pb-Free) 2N6507 TO-220AB 2N6507G TO-220AB (Pb-Free) 2N6507T TO-220AB 2N6507TG TO-220AB (Pb-Free) 2N6508 TO-220AB 2N6508G TO-220AB (Pb-Free) 2N6508TG TO-220AB (Pb-Free) 2N6509 TO-220AB 2N6509G TO-220AB (Pb-Free) 2N6509T TO-220AB 2N6509TG TO-220AB (Pb-Free) http://onsemi.com 6 Shipping 500 Units / Box 50 Units / Rail 500 Units / Box 50 Units / Rail 500 Units / Box 50 Units / Rail 500 Units / Box 50 Units / Rail 2N6504 Series PACKAGE DIMENSIONS TO-220AB CASE 221A-07 ISSUE AA -TB F T SEATING PLANE C S 4 Q A U 1 2 3 H K Z R L V J G D N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 3: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 CATHODE ANODE GATE ANODE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative 2N6504/D