87
Industrial 10-port Gigabit Ethernet Switch
JetNet 3010G
Technology
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet Fiber
,((([ÀRZFRQWURODQGEDFNSUHVVXUH
IEEE802.1p Class of Service
Performance
Switch Technology:
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput: 14,880pps for 10M Ethernet,
148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit
Ethernet
Transfer packet size: 64 bytes to 1522 bytes (with VLAN
Tag)
MAC Address: 8K MAC address table
System Packet Buffer: 1Mbits shared packet buffer
Quality of Service:
Compliance with IEEE802.1p class of service with
Tag Based Priority rule Per switch port provides 4
priority queues with 8 (Higher):4(High):2(Low):1(Lower)
scheduling. The Tag Priority ID as following: Higher (6,7),
High (4,5), Low (0,3), Lowest (1,2)
Interface
Number of Ports:
7 x 10/100 Base-TX with Auto MDI/MDI-X function
Auto-Negotiation
3 x 1000Base-T supports Auto MDI/MDI-X , Auto-
Negotiation function and combo with Small Form Factor
Package (SFP) socket
Connectors:
10/100 Base-TX: RJ-45
1000Base-T: RJ-45
6)3VXSSRUWVDOOY6)3W\SH*LJDELW¿EHUWUDQVFHLYHU
Power: 4-Pin Removable Terminal Block connector
Cables:
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded
twisted pair or shielded twisted pair cable. The link distance
is maximum 100 meters
Diagnostic LED:
System Power: Power 1 (Green), Power 2 (Green)
10/100 Mbps RJ-45 port: Link/Activity (Green), Full Duplex/
Collision (Yellow)
port: Link/Activity(Green)
1000Base-T RJ-45 port: Link/Activity (Green)
SFP port: Link/Activity (Green)
Power Requirements
System Power:
4 pins terminal block for power input.
DC 24V (12~48V) with polarity reverse protection and
redundant function
Power Consumption:
11.5 Watts @ DC 24V(Maximum)
Mechanical
Installation: DIN-Rail or Wall mount
Case:
Aluminum metal case with IP31 grade case protection for
drop-waterproof and dustproof
Dimension:
137.85mm(H) x 96mm (W) x 132mm (D)
( with DIN rail clip)
Weight:
0.875g without package
Environmental
Operating Temperature: -20 ~70OC
Operating Humidity: 0% ~ 90%, (non-condensing)
Storage Temperature: -40 ~ 85OC
Storage Humidity: 0%~ 95%, (non-condensing)
Hi-Pot: 1.2KV on port to port and port to power
Regulatory Approvals
EMI: FCC Class A, CE/EN55022
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: CE/EN60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 267380 hours @ 25OC
Warranty: 5 years
6SHFL¿FDWLRQ
JetNet 3010G!Industrial 10-Port Gigabit Ethernet Switch
Includes:
JetNet 3010G(without SFP transceiver)
Quick Installation Guide
CD User’s manual
Ordering Information
Industrial Ethernet Switch
88
Industrial 10-port Gigabit Ethernet Switch
JetNet 3010G
SFPGSX:1000Base-SX multi-mode SFP transceiver,550m, -10~70OC
SFPGSX-w:1000Base-SX multi-mode SFP transceiver,550m, wide operating temperature, -40~85OC
SFPGSX2:1000Base-SX plus multi-mode SFP transceiver,2Km, -10~70OC
SFPGSX2-w:1000Base-SX plus multi-mode SFP transceiver, 2Km,wide operating temperature, -10~70OC
SFPGLX10:1000Base-LX single-mode SFP transceiver 10Km, -10~70OC
SFPGLX10-w:1000Base-LX single-mode SFP transceiver, 10Km, wide operating temperature, -40~85OC
SFPGLHX30:1000Base-LHX single-mode SFP transceiver,30Km, -10~70OC
SFPGLHX30-w:1000Base-LHX single-mode SFP transceiver, 30Km, wide operating temperature, -40~85OC
SFPGXD50:1000Base-XD single-mode SFP transceiver, 50Km, -10~70OC
SFPGXD50-w:1000Base-XD single-mode SFP transceiver, 50Km, wide operating temperature, -40~85OC
SFPGZX70:1000Base-ZX single-mode SFP transceiver, 70Km, -10~70OC
SFPGZX70-w:1000Base-ZX single-mode SFP transceiver, 70Km, wide operating temperature, -40~85OC
Optional Accessories
