© Semiconductor Components Industries, LLC, 2011
November, 2011 Rev. 10
1Publication Order Number:
MMSZ5221BT1/D
MMSZ52xxBT1 Series,
SZMMSZ52xxBT1G Series
Zener Voltage Regulators
500 mW SOD123 Surface Mount
Three complete series of Zener diodes are offered in the convenient,
surface mount plastic SOD123 package. These devices provide a
convenient alternative to the leadless 34package style.
Features
500 mW Rating on FR4 or FR5 Board
Wide Zener Reverse Voltage Range 2.4 V to 110 V
Package Designed for Optimal Automated Board Assembly
Small Package Size for High Density Applications
General Purpose, Medium Current
ESD Rating of Class 3 (>16 kV) per Human Body Model
AECQ101 Qualified and PPAP Capable
SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements
PbFree Packages are Available
Mechanical Characteristics:
CASE: Void-free, transfer-molded, thermosetting plastic case
FINISH: Corrosion resistant finish, easily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260°C for 10 Seconds
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V0
MAXIMUM RATINGS
Rating Symbol Max Unit
Total Power Dissipation on FR5 Board,
(Note 1) @ TL = 75°C
Derated above 75°C
PD500
6.7
mW
mW/°C
Thermal Resistance, JunctiontoAmbient
(Note 2)
RqJA 340 °C/W
Thermal Resistance, JunctiontoLead
(Note 2)
RqJL 150 °C/W
Junction and Storage Temperature Range TJ, Tstg 55 to +150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. FR5 = 3.5 X 1.5 inches, using the minimum recommended footprint.
2. Thermal Resistance measurement obtained via infrared Scan Method.
Device Package Shipping
ORDERING INFORMATION
SOD123
CASE 425
STYLE 1
1
Cathode
2
Anode
MMSZ52xxBT1 SOD123 3000 / Tape &
Reel
MARKING DIAGRAM
See specific marking information in the device marking
column of the Electrical Characteristics table on page 3 of
this data sheet.
DEVICE MARKING INFORMATION
1
2
MMSZ52xxBT3 SOD123 10000 / Tape &
Reel
For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
MMSZ52xxBT1G SOD123
(PbFree)
3000 / Tape &
Reel
MMSZ52xxBT3G SOD123
(PbFree)
10000 / Tape &
Reel
http://onsemi.com
xx = Device Code (Refer to page 3)
M = Date Code
G= PbFree Package
(Note: Microdot may be in either location)
xx MG
G
1
SZMMSZ52xxBT1G SOD123
(PbFree)
3000 / Tape &
Reel
SZMMSZ52xxBT3G SOD123
(PbFree)
10000 / Tape &
Reel
MMSZ52xxBT1 Series, SZMMSZ52xxBT1G Series
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS (TA = 25°C unless
otherwise noted, VF = 0.95 V Max. @ IF = 10 mA)
Symbol Parameter
VZReverse Zener Voltage @ IZT
IZT Reverse Current
ZZT Maximum Zener Impedance @ IZT
IZK Reverse Current
ZZK Maximum Zener Impedance @ IZK
IRReverse Leakage Current @ VR
VRReverse Voltage
IFForward Current
VFForward Voltage @ IFZener Voltage Regulator
IF
V
I
IR
IZT
VR
VZ
VF
MMSZ52xxBT1 Series, SZMMSZ52xxBT1G Series
http://onsemi.com
3
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
Device
Device
Marking
Zener Voltage (Notes 3 and 4) Zener Impedance (Note 5)
Leakage Cur-
rent
VZ (Volts) @ IZT ZZT @ IZT ZZK @ IZK IR @ VR
Min Nom Max mA W W mA mAVolts
SZ/MMSZ5221BT1, G C1 2.28 2.4 2.52 20 30 1200 0.25 100 1
SZ/MMSZ5222BT1, G C2 2.38 2.5 2.63 20 30 1250 0.25 100 1
SZ/MMSZ5223BT1, G C3 2.57 2.7 2.84 20 30 1300 0.25 75 1
MMSZ5224BT1, G C4 2.66 2.8 2.94 20 30 1400 0.25 75 1
SZ/MMSZ5225BT1, G C5 2.85 3.0 3.15 20 29 1600 0.25 50 1
SZ/MMSZ5226BT1, G D1 3.14 3.3 3.47 20 28 1600 0.25 25 1
SZ/MMSZ5227BT1, G D2 3.42 3.6 3.78 20 24 1700 0.25 15 1
SZ/MMSZ5228BT1, G D3 3.71 3.9 4.10 20 23 1900 0.25 10 1
SZ/MMSZ5229BT1, G D4 4.09 4.3 4.52 20 22 2000 0.25 5 1
SZ/MMSZ5230BT1, G D5 4.47 4.7 4.94 20 19 1900 0.25 5 2
SZ/MMSZ5231BT1, G E1 4.85 5.1 5.36 20 17 1600 0.25 5 2
SZ/MMSZ5232BT1, G E2 5.32 5.6 5.88 20 11 1600 0.25 5 3
SZ/MMSZ5233BT1, G E3 5.70 6.0 6.30 20 7 1600 0.25 5 3.5
SZ/MMSZ5234BT1, G E4 5.89 6.2 6.51 20 7 1000 0.25 5 4
SZ/MMSZ5235BT1, G E5 6.46 6.8 7.14 20 5 750 0.25 3 5
SZ/MMSZ5236BT1, G F1 7.13 7.5 7.88 20 6 500 0.25 3 6
SZ/MMSZ5237BT1, G F2 7.79 8.2 8.61 20 8 500 0.25 3 6.5
SZ/MMSZ5238BT1, G F3 8.27 8.7 9.14 20 8 600 0.25 3 6.5
SZ/MMSZ5239BT1, G F4 8.65 9.1 9.56 20 10 600 0.25 3 7
SZ/MMSZ5240BT1, G F5 9.50 10 10.50 20 17 600 0.25 3 8
SZ/MMSZ5241BT1, G H1 10.45 11 11.55 20 22 600 0.25 2 8.4
SZ/MMSZ5242BT1/T3, G H2 11.40 12 12.60 20 30 600 0.25 1 9.1
SZ/MMSZ5243BT1, G H3 12.35 13 13.65 9.5 13 600 0.25 0.5 9.9
SZ/MMSZ5244BT1, G H4 13.30 14 14.70 9.0 15 600 0.25 0.1 10
SZ/MMSZ5245BT1, G H5 14.25 15 15.75 8.5 16 600 0.25 0.1 11
SZ/MMSZ5246BT1, G J1 15.20 16 16.80 7.8 17 600 0.25 0.1 12
SZ/MMSZ5247BT1, G J2 16.15 17 17.85 7.4 19 600 0.25 0.1 13
SZ/MMSZ5248BT1, G J3 17.10 18 18.90 7.0 21 600 0.25 0.1 14
SZ/MMSZ5249BT1, G J4 18.05 19 19.95 6.6 23 600 0.25 0.1 14
SZ/MMSZ5250BT1, G J5 19.00 20 21.00 6.2 25 600 0.25 0.1 15
SZ/MMSZ5251BT1, G K1 20.90 22 23.10 5.6 29 600 0.25 0.1 17
SZ/MMSZ5252BT1, G K2 22.80 24 25.20 5.2 33 600 0.25 0.1 18
MMSZ5253BT1, G K3 23.75 25 26.25 5.0 35 600 0.25 0.1 19
SZ/MMSZ5254BT1, G K4 25.65 27 28.35 4.6 41 600 0.25 0.1 21
SZ/MMSZ5255BT1, G K5 26.60 28 29.40 4.5 44 600 0.25 0.1 21
SZ/MMSZ5256BT1, G M1 28.50 30 31.50 4.2 49 600 0.25 0.1 23
SZ/MMSZ5257BT1, G M2 31.35 33 34.65 3.8 58 700 0.25 0.1 25
SZ/MMSZ5258BT1/T3, G M3 34.20 36 37.80 3.4 70 700 0.25 0.1 27
SZ/MMSZ5259BT1, G M4 37.05 39 40.95 3.2 80 800 0.25 0.1 30
SZ/MMSZ5260BT1, G M5 40.85 43 45.15 3.0 93 900 0.25 0.1 33
SZ/MMSZ5261BT1, G N1 44.65 47 49.35 2.7 105 1000 0.25 0.1 36
SZ/MMSZ5262BT1, G N2 48.45 51 53.55 2.5 125 1100 0.25 0.1 39
MMSZ5263BT1, G N3 53.20 56 58.80 2.2 150 1300 0.25 0.1 43
MMSZ5264BT1, G N4 57.00 60 63.00 2.1 170 1400 0.25 0.1 46
SZ/MMSZ5265BT1, G N5 58.90 62 65.10 2.0 185 1400 0.25 0.1 47
SZ/MMSZ5266BT1, G P1 64.60 68 71.40 1.8 230 1600 0.25 0.1 52
SZ/MMSZ5267BT1, G P2 71.25 75 78.75 1.7 270 1700 0.25 0.1 56
MMSZ5268BT1, G P3 77.90 82 86.10 1.5 330 2000 0.25 0.1 62
MMSZ5269BT1 P4 82.65 87 91.35 1.4 370 2200 0.25 0.1 68
SZ/MMSZ5270BT1, G P5 86.45 91 95.55 1.4 400 2300 0.25 0.1 69
MMSZ5272BT1, G R2 104.5 110 115.5 1.1 750 3000 0.25 0.1 84
3. The type numbers shown have a standard tolerance of ±5% on the nominal Zener voltage.
4. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30°C $1°C.
5. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the ac current applied.
The specified limits are for IZ(AC) = 0.1 IZ(dc) with the AC frequency = 1 KHz.
*The “G’’ suffix indicates PbFree package available.
MMSZ52xxBT1 Series, SZMMSZ52xxBT1G Series
http://onsemi.com
4
TYPICAL CHARACTERISTICS
VZ, NOMINAL ZENER VOLTAGE (V)
3
2
1
0
1
2
3
4
5
6
7
8
12111098765432
Figure 1. Temperature Coefficients
(Temperature Range 55°C to +150°C)
TYPICAL TC VALUES
FOR MMSZ52xxBT1 SERIES,
SZMMSZ52xxBT1G SERIES
VZ @ IZT
1000
10
110 200
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 2. Temperature Coefficients
(Temperature Range 55°C to +150°C)
1.2
1.0
0.8
0.6
0.4
0.2
01501251007550250
T, TEMPERATURE (°C)
Figure 3. Steady State Power Derating
PD versus TA
PD versus TL
0.1
PW, PULSE WIDTH (ms)
Figure 4. Maximum Nonrepetitive Surge Power
1 10 100 1000
1000
100
10
1
RECTANGULAR
WAVEFORM, TA = 25°C
100
VZ, NOMINAL ZENER VOLTAGE
Figure 5. Effect of Zener Voltage on
Zener Impedance
101
1000
100
10
1
TJ = 25°C
IZ(AC) = 0.1 IZ(DC)
f = 1 kHz
IZ = 1 mA
5 mA
20 mA
VF
, FORWARD VOLTAGE (V)
Figure 6. Typical Forward Voltage
1.21.11.00.90.80.70.60.50.4
1000
100
10
1
75 V (MMSZ5267BT1)
91 V (MMSZ5270BT1)
150°C75°C 25°C 0°C
qVZ, TEMPERATURE COEFFICIENT (mV/°C)
qVZ, TEMPERATURE COEFFICIENT (mV/°C)
Ppk, PEAK SURGE POWER (WATTS)
ZZT
, DYNAMIC IMPEDANCE (W)
IF
, FORWARD CURRENT (mA)
100
100
TYPICAL TC VALUES
FOR MMSZ52xxBT1 SERIES,
SZMMSZ52xxBT1G SERIES
VZ @ IZT
MMSZ52xxBT1 Series, SZMMSZ52xxBT1G Series
http://onsemi.com
5
TYPICAL CHARACTERISTICS
C, CAPACITANCE (pF)
100
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 7. Typical Capacitance
1000
100
10
1101
BIAS AT
50% OF VZ NOM
TA = 25°C
0 V BIAS
1 V BIAS
12
VZ, ZENER VOLTAGE (V)
100
10
1
0.1
0.01 1086420
TA = 25°C
VZ, ZENER VOLTAGE (V)
100
10
1
0.1
0.01 10 30 50 70 90
TA = 25°C
90
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 8. Typical Leakage Current
1000
100
10
1
0.1
0.01
0.001
0.0001
0.00001 80706050403020100
+150°C
+25°C
55°C
Figure 9. Zener Voltage versus Zener Current
(VZ Up to 12 V)
Figure 10. Zener Voltage versus Zener Current
(12 V to 91 V)
IR, LEAKAGE CURRENT (mA)
IZ, ZENER CURRENT (mA)
IZ, ZENER CURRENT (mA)
MMSZ52xxBT1 Series, SZMMSZ52xxBT1G Series
http://onsemi.com
6
PACKAGE DIMENSIONS
SOD123
CASE 42504
ISSUE G
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
ÂÂÂÂ
ÂÂÂÂ
ÂÂÂÂ
E
b
DA
L
C
1
2
A1
DIM MIN NOM MAX
MILLIMETERS INCHES
A0.94 1.17 1.35 0.037
A1 0.00 0.05 0.10 0.000
b0.51 0.61 0.71 0.020
c
1.60
0.15
0.055
D1.40 1.80
E2.54 2.69 2.84 0.100
---
3.68 0.140
L0.25
3.86
0.010
HE
0.046
0.002
0.024
0.063
0.106
0.145
0.053
0.004
0.028
0.071
0.112
0.152
MIN NOM MAX
3.56
HE
---
--- ---
0.006
--- ---
--- ---
*For additional information on our PbFree strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
1.22
0.048
ÉÉ
ÉÉ
ÉÉ
0.91
0.036
2.36
0.093
4.19
0.165
ǒmm
inchesǓ
SCALE 10:1
ÉÉ
ÉÉ
ÉÉ
q
--- ---
q00
10 10
°°° °
STYLE 1:
PIN 1. CATHODE
2. ANODE
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
MMSZ5221BT1/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative