HLMP-KA45 T-1 (3 mm) High Intensity InGaN Lamp Data Sheet Description Features This blue LED is designed in an industry standard T-1 package with clear and non-diffused optics. This lamp is ideal for use as indicators and for general purpose lighting. * Popular T1 diameter package * General purpose leads * Reliable and rugged * Binned for color and intensity * InGaN blue dice Applications * Status indicators * Small message panel * Running and decorative lights for commercial use * Back-lighting * Consumer audio Package Dimensions 1.14 (0.045) 0.51 (0.020) 3.43 (0.135) 2.92 (0.115) 24.1 (0.95) MIN. 0.65 (0.026) MAX. CATHODE 1.52 (0.060) 1.02 (0.040) 2.79 (0.110) 2.29 (0.090) O 3.17 (0.125) 2.67 (0.105) 4.70 (0.185) 4.19 (0.165) 0.55 (0.022) SQ. TYP. 0.40 (0.016) 6.35 (0.250) 5.58 (0.220) Notes: 1. All dimensions are in millimeters (inches). 2. An epoxy meniscus may extend about 1 mm (0.040") down the leads. CAUTION: Device are Class I ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details. Ordering Information HLMP-X X XX - X X X XX Mechanical Option 00: Bulk Color Bin Selection 0: Full color bin distribution Maximum Iv Bin Options 0: Open (No maximum limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Viewing Angle 45:50 degree Color A: Blue Package K: T-1 Absolute Maximum Ratings at TA = 25C Parameter HLMP-KA45 (Blue) Unit DC Forward Current[1] 30 mA Peak Pulsed Forward Current 100 mA Average Forward Current 30 mA Power Dissipation 116 mW LED Junction Temperature 115 C Operating Temperature Range -35 to +85 C Storage Temperature Range -35 to +85 C Note: 1. Derate linearly as shown in Figure 2. 2 Device Selection Guide Part Number Color and Dominant Wavelength d (nm) Typ Luminous Intensity Iv (mcd) at 20 mA Min. Luminous Intensity Iv (mcd) at 20 mA Max. HLMP-KA45-E00xx Blue 470 85 - HLMP-KA45-J00xx Blue 470 240 Notes: 1. The luminous intensity is measured on the mechanical axis of the lamp package. 2. The optical axis is closely aligned with the package mechanical axis. 3. The dominant wavelength, d is derived from the CIE Chromaticity Diagram and represents the color of the lamp. Electrical /Optical Characteristics Table at TA = 25C Parameter Symbol Min. Typ. Max. Forward Voltage VF 2.8 Capacitance C 40 Thermal Resistance RJ-PIN 465 C/W LED Junction-to-Cathode Lead Viewing Angle 21/2 50 deg Dominant Wavelength d 470 nm IF = 20 mA Peak Wavelength P 464 nm Peak of Wavelength of Spectral Distribution at IF = 20 mA Spectral Halfwidth 1/2 24 nm Wavelength Width at Spectral Distribution 1/2 Power Point at IF = 20 mA 3.8 Units Test Conditions V IF = 20 mA pF VF = 0, f = 1 MHz Notes: 1. 2 1/2 is the off-axis angle where the luminous intensity is 1/2 the on axis intensity. 2. The dominant wavelength, d, is derived from the Chromaticity Diagram and represents the color of the lamp. 3 35 30 FORWARD CURRENT - mA RELATIVE INTENSITY 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 480 530 580 WAVELENGTH - nm 630 10 0 20 40 60 AMBIENT TEMPERATURE - C 80 100 Figure 2. Maximum forward current vs. ambient temperature based on Tjmax = 115C 1.0 0.9 RELATIVE INTENSITY 25 FORWARD CURRENT - mA 15 0 680 30 20 15 10 5 0 1 2 FORWARD VOLTAGE - V Figure 3. Forward Current vs Forward Volatge 4 RJ-A = 780C/W 20 5 Figure 1. Relative Intensity vs Wavelength 0 25 3 4 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 ANGULAR DISPLACEMENT - DEGREES Figure 4. Radiation pattern 90 Intensity Bin Limit Color Categories Intensity Range (mcd) Lambda (nm) Bin Min. Max. Color Cat # Min. Max. C 50.0 65.0 Blue 1 460.0 464.0 D 65.0 85.0 2 464.0 468.0 E 85.0 110.0 3 468.0 472 .0 F 110.0 140.0 4 472 .0 476.0 G 140.0 180.0 5 476.0 480.0 H 180.0 40.0 J 40.0 310.0 K 310.0 400.0 L 400.0 50.0 M 50.0 680.0 N 680.0 880.0 P 880.0 1150.0 Q 1150.0 1500.0 Maximum tolerance for each bin limit is 15%. For product information and a complete list of distributors, please go to our web site: Tolerance for each bin limit is 0.5nm. Mechanical Option Matrix Mechanical Option Code Definition 00 Bulk Packaging, minimum increment 500 pcs/bag Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Avago representative for further clarification/information. www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2009 Avago Technologies. All rights reserved. AV02-0921EN - October 27, 2009