O
* High current capability
* High surge current capability
* High reliability
* High efficiency
* Low power loss
* Low cost
* Low forward voltage drop
* Case : DO-201AD Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL SB520 SB530 SB540 SB550 SB560 SB570 SB580 SB590 SB 5B0 UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 70 80 90 100 Volts
Maximum RMS Voltage VRMS 14 21 28 35 42 49 56 63 70 Volts
Maximum DC Blocking Voltage VDC 20 30 40 50 60 70 80 90 100 Volts
Maximum Average Forward Current
0.375", 9.5mm Lead Length See Fig.1 IF(AV)5.0 Amps.
Peak Forward Surge Current, 8.3ms single half sine wave
superimposed on rated load (JEDEC Method) IFSM 150 Amps.
Maximum Forward Voltage at IF = 5 Amps. (Note 1) VF0.5 0.67 0.79 Volt.
Maximum Reverse Current at Ta = 25 °CIR0.5 mA
Rated DC Blocking Voltage (Note 1) Ta = 100 °CIR(H) 50 25 mA
Junction Temperature Range TJ - 65 to + 125 - 65 to + 150 °C
Storage Temperature Range TSTG - 65 to + 150 °C
(1) Pulse Test : Pulse Width = 300 µs, Duty Cycle = 2%. UPDATE : SEPTEMBER 12, 1998
RATING
DO-201AD
0.21 (5.33)
0.19 (4.82)
0.375 (9.52)
0.285 (7.24)
0.052 (1.32)
0.048 (1.22)
1.00 (25.4)
MIN.
1.00 (25.4)
MIN.
Dimensions in inches and ( millimeters )
TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com
103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND
ELECTRONICS INDUSTRY (USA) CO., LTD.