INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: * The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications * The IC06 74HC/HCT/HCU/HCMOS Logic Package Information * The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT166 8-bit parallel-in/serial-out shift register Product specification File under Integrated Circuits, IC06 December 1990 Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 an active LOW parallel enable (PE) input. When PE is LOW one set-up time prior to the LOW-to-HIGH clock transition, parallel data is entered into the register. When PE is HIGH, data is entered into the internal bit position Q0 from serial data input (Ds), and the remaining bits are shifted one place to the right (Q0 Q1 Q2, etc.) with each positive-going clock transition. This feature allows parallel-to-serial converter expansion by tying the Q7 output to the Ds input of the succeeding stage. FEATURES * Synchronous parallel-to-serial applications * Synchronous serial data input for easy expansion * Clock enable for "do nothing" mode * Asynchronous master reset * For asynchronous parallel data load see "165" * Output capability: standard * ICC category: MSI The clock input is a gated-OR structure which allows one input to be used as an active LOW clock enable (CE) input. The pin assignment for the CP and CE inputs is arbitrary and can be reversed for layout convenience. The LOW-to-HIGH transition of input CE should only take place while CP is HIGH for predictable operation. A LOW on the master reset (MR) input overrides all other inputs and clears the register asynchronously, forcing all bit positions to a LOW state. GENERAL DESCRIPTION The 74HC/HCT166 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT166 are 8-bit shift registers which have a fully synchronous serial or parallel data entry selected by QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf = 6 ns TYPICAL SYMBOL tPHL/ tPLH PARAMETER UNIT CONDITIONS propagation delay CP to Q7 MR to Q7 HC HCT 15 14 20 19 ns ns CL = 15 pF; VCC = 5 V fmax maximum clock frequency 63 50 MHz CI input capacitance 3.5 3.5 pF CPD power dissipation capacitance per package 41 41 pF notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD x VCC2 x fi + (CL x VCC2 x fo) where: fi = input frequency in MHz fo = output frequency in MHz (CL x VCC2 x fo) = sum of outputs CL = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI = GND to VCC For HCT the condition is VI = GND to VCC - 1.5 V ORDERING INFORMATION See "74HC/HCT/HCU/HCMOS Logic Package Information". December 1990 2 Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1 Ds serial data input 2, 3, 4, 5, 10, 11, 12, 14 D0 to D7 parallel data inputs 6 CE clock enable input (active LOW) 7 CP clock input (LOW-to-HIGH edge-triggered) 8 GND ground (0 V) 9 MR asynchronous master reset (active LOW) 13 Q7 serial output from the last stage 15 PE parallel enable input (active LOW) 16 VCC positive supply voltage Fig.1 Pin configuration. December 1990 Fig.2 Logic symbol. 3 Fig.3 IEC logic symbol. Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 Fig.4 Functional diagram. FUNCTION TABLE INPUTS Qn REGISTER OPERATING MODES PE CE CP DS D0-D7 Q0 Q1-Q6 OUTPUT Q7 parallel load I I I I X X I-I h-h L H L-L H-H L H serial shift h h I I I h X-X X-X L H q0 - q5 q0 - q5 q6 q6 hold "do nothing" X h X X X-X q0 q 1 - q6 q7 Notes 1. H = HIGH voltage level h = HIGH voltage level one set-up time prior to the LOW-to-HIGH CP transition L = LOW voltage level I = LOW voltage level one set-up time prior to the LOW-to-HIGH CP transition q = lower case letters indicate the state of the referenced output one set-up time prior to the LOW-to-HIGH CP transition X = don't care = LOW-to-HIGH CP transition December 1990 4 Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register Fig.5 Logic diagram. Fig.6 Typical clear, shift, load, inhibit, and shift sequences. December 1990 5 74HC/HCT166 Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 DC CHARACTERISTICS FOR 74HC For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HC SYMBOL PARAMETER +25 min. -40 to +85 typ. max. min. max. -40 to +125 UNIT VCC (V) WAVEFORMS min. max. tPHL/ tPLH propagation delay CP to Q7 50 18 14 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.7 tPHL propagation delay MR to Q7 47 17 14 160 32 27 200 40 34 240 48 41 ns 2.0 4.5 6.0 Fig.8 tTHL/ tTLH output transition time 19 7 6 75 15 13 95 19 16 110 22 19 ns 2.0 4.5 6.0 Fig.7 tW clock pulse width HIGH or LOW 80 16 14 17 6 5 100 20 17 120 24 20 ns 2.0 4.5 6.0 Fig.7 tW master reset pulse width LOW 100 20 17 25 9 7 125 25 21 150 30 26 ns 2.0 4.5 6.0 Fig.8 trem removal time MR to CP 0 0 0 -19 -7 -6 0 0 0 0 0 0 ns 2.0 4.5 6.0 Fig.8 tsu set-up time Dn, CE to CP 80 16 14 14 5 4 100 20 17 120 24 20 ns 2.0 4.5 6.0 Fig.9 tsu set-up time PE to CP 100 20 17 33 12 10 125 25 21 150 30 26 ns 2.0 4.5 6.0 Fig.8 th hold time Dn, CE to CP 2 2 2 -8 -3 -2 2 2 2 2 2 2 ns 2.0 4.5 6.0 Fig.8 th hold time PE to CP 0 0 0 -28 -10 -8 0 0 0 0 0 0 ns 2.0 4.5 6.0 Fig.9 fmax maximum clock pulse frequency 6.0 30 35 19 57 68 4.8 24 28 4.0 20 24 MHz 2.0 4.5 6.0 Fig.7 December 1990 6 Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see "74HC/HCT/HCU/HCMOS Logic Family Specifications". Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ICC) for a unit load of 1 is given in the family specifications. To determine ICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT D0 to D7 Ds CP CE MR PE 0.35 0.35 0.80 0.80 0.40 0.60 December 1990 7 Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) TEST CONDITIONS 74HCT SYMBOL PARAMETER +25 min. -40 to +85 typ. max. min. max. -40 to +125 UNIT VCC (V) WAVEFORMS min. max. tPHL/ tPLH propagation delay CP to Q7 23 40 50 60 ns 4.5 Fig.7 tPHL propagation delay MR to Q7 22 40 50 60 ns 4.5 Fig.8 tTHL/ tTLH output transition time 7 15 19 22 ns 4.5 Fig.7 tW clock pulse width HIGH or LOW 20 9 25 30 ns 4.5 Fig.7 tW master reset pulse width LOW 25 11 31 38 ns 4.5 Fig.8 trem removal time MR to CP 0 -7 0 0 ns 4.5 Fig.8 tsu set-up time Dn, CE to CP 16 8 20 24 ns 4.5 Fig.9 tsu set-up time PE to CP 30 15 38 45 ns 4.5 Fig.8 th hold time Dn, CE to CP 0 -3 0 0 ns 4.5 Fig.9 th hold time PE to CP 0 -13 0 0 ns 4.5 Fig.9 fmax maximum clock pulse width 25 45 20 17 MHz 4.5 Fig.7 December 1990 8 Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 AC WAVEFORMS The changing to output assumes internal Q6 opposite state from Q7. The number of clock pulses required between the tPLH and tPHL measurements can be determined from the function table. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3V; VI = GND to 3V. Fig.7 Waveforms showing the clock (CP) to output (Q7) propagation delays, the clock pulse width, the output transition times and the maximum clock frequency. The number of clock pulses required between the tPLH and tPHL measurements can be determined from the function table. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3V; VI = GND to 3V. Fig.8 Waveforms showing the master reset (MR) pulse width, the master reset to output (Q7) propagation delay and the master reset to clock (CP) removal time. December 1990 9 Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 The number of clock pulses required between the tPLH and tPHL measurements can be determined from the function table. CE may change only from HIGH-to-LOW while CP is LOW. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3V; VI = GND to 3V. Fig.9 Waveforms showing the set-up and hold times from the serial data input (Ds), the data inputs (Dn), the clock enable input (LOW CE), the clock enable input CE and the parallel enable input to the clock (CP). PACKAGE OUTLINES See "74HC/HCT/HCU/HCMOS Logic Package Outlines". December 1990 10