SMBJ5.0(C)A - SMBJ170(C)A
SMBJ5.0(C)A-SMBJ170(C)A, Rev. D
SMBJ5.0(C)A - SMBJ170(C)A
600 Watt Transient Voltage Suppressors
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
2001 Fairchild Semiconductor Corporation
Symbol
Parameter
Value
Units
PPPM Peak Pulse Power Dissi pation on 10/1000 µs waveform mini mum 600 W
IPPM Peak Pulse Current on 10/1000 µs waveform see table A
IFSM Non-repetiti ve Peak Forward Surge Current
superimposed on rated load (JEDEC method) (Note 1)
100
A
Tstg Storage Temperature Range -55 to +150 °C
TJ Operating Junction Temperat ure -55 to +150 °C
Features
•Glass passivated junction.
•600W Peak Pulse Power capability on
10/1000 µs waveform.
•Excellent clamping capability.
•Low incremental surge resistance.
•Fast response time; typically less
than 1.0 ps from 0 volts to BV for
unidirectional and 5.0 ns for
bidirectional.
•Typical IR less than 1.0 µA above 10V.
DEVICES FOR BIPOLAR APPLICA TIONS
- Bidirectional types use CA suffix.
- Electrical Characteristics apply in both directions.
SMB/DO-214AA
COLOR BAND DENOTES CATHODE
ON UNIDIRECTIONAL DEVICES ONLY.
NO COLOR BAND ON BIDIRECTIONAL
DEVICES.
SMBJ5.0(C)A - SMBJ170(C)A
SMBJ5.0(C)A-SMBJ170(C)A, Rev. D
Transient Voltage Supressors
(continued)
Electrical Characteristics TA = 25°C unless otherwise noted
Uni-directional
Bi-d ir ec tion a l ( C)
Device
Part
Marking* Reverse
Stand-off Voltage
VRWM (V )
B reakdown Voltage
V BR (V)
m in m a x
Te s t
Current
IT (mA)
Max Clamping
Voltage @IPPM
V C (V)
M ax Peak Pulse
Su rge C urrent
IPPM (A)
Max R everse
Leakage VRWM
IR (uA)**
S MB J 5.0 (C)A K E 5.0 6.4 0 7 .0 1 0 9 .2 6 5 .2 8 00
SM BJ6 .0(C)A KG 6.0 6.67 7.37 10 10.3 58.3 800
SM BJ6 .5(C)A KK(AK) 6.5 7.22 7 .98 10 11.2 53.6 500
SM BJ7 .0(C)A KM 7.0 7.78 8 .60 10 12.0 50.0 200
SM BJ7 .5(C)A KP(AP) 7.5 8.33 9 .21 1 12.9 46.5 100
SM BJ8 .0(C)A KR(AR ) 8.0 8.89 9.83 1 13.6 44.1 50
SM BJ8 .5(C)A KT(AT) 8.5 9.44 10 .4 1 14.4 41.7 20
SM BJ9 .0(C)A KV(AV) 9.0 10.0 11.1 1 15.4 39.0 10
SM BJ10(C)A KX (AX) 10 11.1 12.8 1 17.0 35.3 5
SM BJ11(C)A KZ 11 12.2 13.5 1 18.2 33.0 5
SM BJ12(C)A LE(BE) 12 13.3 14.7 1 19.9 30.2 5
SM BJ13(C)A LG 13 14.4 15.9 1 21.5 27.9 5
SM BJ14(C)A LK(BK) 14 15.6 17.2 1 23.2 25.9 5
SM BJ15(C)A LM (BM ) 15 16.7 18.5 1 24.4 24.6 5
SM BJ16(C)A LP(LM ) 16 17.8 19.7 1 26.0 23.1 5
SM BJ17(C)A LR 17 18.9 20.9 1 27.6 21.7 5
SM BJ18(C)A LT(BT) 18 20.0 22.1 1 29.2 20.5 5
SM BJ20(C)A LV 20 22.2 24.5 1 32.4 18.5 5
SM BJ22(C)A LX(BX) 22 24.4 26.9 1 35.5 16.9 5
SM BJ24(C)A LZ(BZ) 24 26.7 29.5 1 38.9 15.4 5
SM BJ26(C)A M E (C E) 26 28.9 31.9 1 42.1 14.3 5
SM BJ28(C)A M G 28 31.1 34.4 1 45.4 13.2 5
SM BJ30(C)A M K (C K) 30 33.3 36.8 1 48.4 12.4 5
SM BJ33(C)A M M (CM) 33 36.7 40.6 1 53.3 11.3 5
SM BJ36(C)A M P (C P) 36 40.0 44.2 1 58.1 10.3 5
S MB J 40 (C)A MR(CR) 4 0 4 4.4 49 .1 1 64.5 9. 3 5
S MB J 43 (C)A MT (CT ) 4 3 4 7 .8 5 2.8 1 6 9 .4 8 . 6 5
S MB J 45 (C)A MV 4 5 5 0 .0 5 5.3 1 7 2 .7 8 . 3 5
S MB J 48 (C)A MX 4 8 5 3 .3 5 8.9 1 7 7 .4 7 . 8 5
S MB J 51 (C)A MZ 5 1 5 6.7 62 .7 1 8 2.4 7. 3 5
S MB J 54 (C)A N E 5 4 6 0.0 66 .3 1 8 7.1 6. 9 5
S MB J 58 (C)A N G 5 8 6 4.4 71 .2 1 9 3.6 6. 4 5
S MB J 60 (C)A N K 6 0 6 6.7 73 .7 1 9 6.8 6. 2 5
SM BJ64(C)A NM 64 71.1 78.6 1 103.0 5.8 5
SM BJ70(C)A NP 70 77.8 86 .0 1 113.0 5.3 5
SM BJ75(C)A NR 75 83.3 92 .1 1 121.0 5.0 5
SM BJ78(C)A N T 78 86.7 95.8 1 126.0 4.8 5
SM BJ85(C)A NV 85 94.4 104.0 1 137.0 4.4 5
SM BJ90(C)A NX 90 100.0 111.0 1 146.0 4.1 5
SM BJ100(C)A NZ 100 111.0 123.0 1 162.0 3.7 5
SM BJ110(C)A PE 110 122.0 135.0 1 177.0 3.4 5
SM BJ120(C)A PG 120 133.0 147.0 1 193.0 3.1 5
SM BJ130(C)A PK 130 144.0 159.0 1 209.0 2.9 5
SM BJ150(C)A PM 150 167.0 185 .0 1 243.0 2.5 5
SM BJ160(C)A PP 160 178.0 197.0 1 259.0 2.3 5
SM BJ170(C)A PR 170 189.0 209.0 1 275.0 2.2 5
* Color band denotes cathode on unidirectional devices only. No color band on bidirectional devices.
** For bidirectional parts with VRWM<10V, the IR max limit is doubled.
SMBJ5.0(C)A - SMBJ170(C)A
SMBJ5.0(C)A-SMBJ170(C)A, Rev. D
Transient Voltage Supressors
(continued)
Typical Characteristics
Pul se Derating Curve
0 25 50 75 100 125 150 175 200
0
25
50
75
100
AM BIENT TEMPERATU RE ( C )
PULSE POW ER (% )
º
Non-Repetitive Surge Current
12 51020 50100
10
20
50
100
200
NU MBER O F CY CLES AT 60Hz
FORWARD SURGE CURRENT (A)
T = T max
8.3ms Single Half Sine-Wave
JEDEC Method
A A
Pe ak Pulse Powe r Rating Cu rve
0.0001 0.001 0.01 0.1 1 10
0.1
1
10
100
PULSE WIDTH (ms)
PULSE POWER (kW)
T = 25 C
º
A
Junction Capacitance
1 5 10 50 100 200
10
20
50
100
200
500
1000
2000
4000
6000
REVERSE VOL TA GE (V)
CAPACITANCE (pF)
T = 25 C
º
A
f = 1.0 MHz
Visg = 50m Vp-p
Measured at
Zero Bias
Measured at
Stand-Off
Voltage (V mw)
Pulse Wavef orm
01234
0
50
100
150
TIME (ms)
PEAK PULSE CURRENT (%)
T = 25 C
º
A
Pulse Width (td) is Defined
as the Po int W h ere th e P eak
Current Decays to 50% of Ipp
10/1000µ
µµ
µsec Waveform
as Defined by R.E.A.
tf = 10 µ
µµ
µsec
e-kt
Peak V alue
Ippm
Half Value-Ipp
2
td
DO-214AA(SMB) Tape and Reel Data
July 2000, Rev . A©2000 Fairchild Semiconductor International
Configuration: Figure 1.0
Components
Configuration: Figure 2.0
Cover Tape
Carrier T ape
F63TNR Label sample
Cathode
F
924
18L3
F
924
18L3
F
924
18L3
F
924
18L3
F
924
18L3
Leader Tape
390mm minimum
Trailer Tape
160mm minimum or
Human Readable Label sample
336mm x 336mm x 38mm
Intermediate container for 13" reel option
Human
Readable/
Barcode
Label
Antistatic Cover Tape
Embossed Carrier Tape
Note/Comments
Packaging Option
Packaging type
Reel Size (inch diameter)
Qty per Reel/Tub e/Bag
Box Dimension (mm)
Max qty per Box
Weight per unit (gm)
Weight per Reel (kg)
Human readable label
Under package
code P5
TNR
13
3,000
336x336x38
6,000
0.093
0.705
Barcode label
Under package
code MA
TNR
13
3,000
336X336X38
6,000
0.093
0.705
Human readable/barcode Label
Human
Readable/Barcode
Label (on top)
DO-214AA(SMB) Packaging
DO-214AA(SMB) Tape Leader and Trailer
DO-214AA(SMB) Packaging Information
Packaging Description:
DO-214AA(SMB) parts are shipped in tape. The carrier
tape is made from a dissipative (carbon filled)
polycarbonate resin. Alternate carrier tape is made of anti-
static plastic. The cover tape is a multilayer film (Heat
Activated Adhesive in nature) primarily composed of
polyester film, adhesive layer, sealant, and anti-static
sprayed agent. These reeled parts in standard option are
shipped with 7,500 units per 13" or 330cm diameter reel.
The reel comes in plastic or carton which is made of
polystyrene plastic (anti-static coated) and thick white
paper respectively. Further information is described in the
Packaging Information table.
These full reels are individually labeled and placed inside
a bleach box (illustrated in figure 1.0) made of recyclable
carton paper with a Fairchild logo printing. One box
contains two reels maximum. Certain number of these
boxes are placed inside shipping box which comes in
different sizes depending on the number of parts shipped.
DO-214AA(SMB) unit orientation
CAUTION: This container provides protection for static sensitive de vices. Handle de vices with caution upon remo v al.
MADE IN ONE OR MORE OF THE FOLLOWING COUNTRIES: PHILIPPINES (MACTAN,
EXPORT PROCESSING ZONE), MALAYSIA, CHINA, S. KOREA, TAIW AN, THAILAND,
SINGAPORE AND JAPAN.
ANTI-STATIC
SS22
I.D.Qty
D/C Lot
T0012 CBVK741B019
3000
LOT: CBVK741B019
FSID: SS22
D/C1: T0012 QTY1: SPEC REV:
SPEC:
QTY: 3000
D/C2: QTY2: CPN:
FAIRCHILD SEMICONDUCTOR INTERNATIONAL
(F63TNR)3.2
July 2000, Rev . A
DO-214AA(SMB) Tape and Reel Data, continued
Dimensions are in millimeter
Pkgtype A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc
3.79
+/-0.15 5.72
+/-0.15 12.0
+/-0.3 1.55
+/-0.05 1.125
+/-0.125 1.75
+/-0.10 10.25
min 5.5
+/-0.05 8.0
+/-0.1 4.0
+/-0.1 2.46
+/-0.30 0.25
+/-0.10 9.3
+/-0.025 0.06
+/-0.02
P1
A0 D1
P0
F
W
E1
D0
E2
B0
Tc
Wc
K0
T
Dimensions are in inches and millimeters
Tap e Size Reel
Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2
12mm 13" Dia 13.0
330 0.059
1.5 512 +0.020/-0.008
13 +0.5/- 0. 2 0.795
20.2 1.97
50 mi n 0.488 +0.078/-0. 000
12.4 +2/-0 0.567
14.4
See detail AA
Dim A
max
13" Diameter Option W2 max Measured at Hub
W1 Measured at Hub
Dim N Dim D
min
Dim C
B Min
DETAIL AA
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum component rotation
0.5mm
maximum
0.5mm
maximum
Sketch C (Top View)
Component lateral movement
Typical
component
cavity
center line
20 deg maximum
Typical
componen t
center line
B0
A0
Sketch B (Top View)
Component Rotation
Sketch A (Side or Front Sectional View)
Component Rotation
User Direction of Feed
Configuration: Figure 3.0
DO-214AA(SMB)
(12mm)
DO-214AA(SMB) Embossed Carrier Tape
DO-214AA(SMB) Reel Configuration:
Figure 4.0
DO-214AA(SMB) (FS PKG Code P6)
DO-214AA(SMB) Package Dimensions
August 1999, Rev. A
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.093
©2000 Fairchild Semiconductor International
21
0.220 (5. 588)
0.200 (5. 080)
0.185 (4. 699)
0.160 (4. 064)
0.096 (2. 438)
0.083 (2. 108)
0.155 (3. 937)
0.130 (3. 302)
0.008 (0. 203)
0.002 (0. 051)
0.012 (0. 305)
0.006 (0. 152)
0.050 (1. 270)
0.030 (0. 762)
0.083 (2. 108)
0.075 (1. 905) +
4.12
3.92
2.30
2.10
2.65
2.45
5.59
5.39
Minimum Recommended
Land Pattern
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORA TION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT ST A TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PA TENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
PACMAN™
POP™
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
SMART ST ART™
Star* Power™
Stealth™
FAST
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
LittleFET™
MicroFET™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
Rev. H1
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DenseTrench™
DOME™
EcoSPARK™
E2CMOSTM
EnSignaTM
FACT™
F ACT Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
UHC™
UltraFET
VCX™
