Data Sheet NE5550234 R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Silicon Power MOS FET FEATURES * * * * * High Output Power : Pout = 33.0 dBm TYP. (VDS = 7.5 V, IDset = 40 mA, f = 460 MHz, Pin = 15 dBm) High power added efficiency : add = 68% TYP. (VDS = 7.5 V, IDset = 40 mA, f = 460 MHz, Pin = 15 dBm) High Linear gain : GL = 23.5 dB TYP. (VDS = 7.5 V, IDset = 40 mA, f = 460 MHz, Pin = 0 dBm) High ESD tolerance Suitable for VHF to UHF-BAND Class-AB power amplifier. APPLICATIONS * 150 MHz Band Radio System * 460 MHz Band Radio System * 900 MHz Band Radio System ORDERING INFORMATION Part Number NE5550234 Order Number NE5550234-AZ NE5550234-T1 NE5550234-T1-AZ Package 3-pin power minimold (34 PKG) (Pb-Free) Marking V5 Supplying Form * 12 mm wide embossed taping * Gate pin faces the perforation side of the tape * 12 mm wide embossed taping * Gate pin faces the perforation side of the tape * Qty 1 kpcs/reel Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: NE5550234 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Operation in excess of any one of these parameters may result in permanent damage. Parameter Drain to Source Voltage Gate to Source Voltage Drain Current Symbol VDS VGS IDS Drain Current (50% Duty Pulsed) Total Power Dissipation Note Channel Temperature Storage Temperature Note: IDS-pulse Ratings 30 6.0 0.6 1.2 Unit V V A A Ptot Tch Tstg 12.5 150 -65 to +150 W C C Value at TC = 25C CAUTION Observe precautions when handling because these devices are sensitive to electrostatic discharge. The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Page 1 of 14 NE5550234 RECOMMENDED OPERATING RANGE (TA = 25C) Parameter Drain to Source Voltage Gate to Source Voltage Drain Current Input Power Symbol VDS VGS IDS Pin Test Conditions f = 460 MHz, VDS = 7.5 V MIN. - 1.65 - - TYP. 7.5 2.20 0.38 15 MAX. 9.0 2.85 - 20 Unit V V A dBm ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) Parameter DC Characteristics Gate to Source Leakage Current Drain to Source Leakage Current (Zero Gate Voltage Drain Current) Gate Threshold Voltage Drain to Source Breakdown Voltage Transconductance Thermal Resistance RF Characteristics Output Power Drain Current Power Drain Efficiency Power Added Efficiency Linear Gain Load VSWR Tolerance Output Power Drain Current Power Drain Efficiency Power Added Efficiency Linear Gain Output Power Drain Current Power Drain Efficiency Power Added Efficiency Linear Gain Notes: 1. 2. 3. 4. Symbol IGSS IDSS Vth BVDSS Gm Rth Pout IDS d add Test Conditions MIN. TYP. MAX. Unit - - - - 100 10 nA A VDS = 7.5 V, IDS = 1.0 mA IDS = 10 A VDS = 7.5 V, IDS = 14020 mA Channel to Case 1.15 25 - - 1.65 38 0.44 10.0 2.25 - - - V V S C/W f = 460 MHz, VDS = 7.5 V, Pin = 15 dBm, IDset = 40 mA (RF OFF) 31.5 - - - - 33.0 0.38 70 68 23.5 - - - - - dBm A % % dB VGS = 6.0 V VDS = 25 V GL Note 1 Note 2 Pout IDS d add GL Note 3 Pout IDS d add GL Note 4 f = 460 MHz, VDS = 9.0 V, Pin = 15 dBm, IDset = 40 mA (RF OFF) Load VSWR=20:1(All Phase) f = 157 MHz, VDS = 7.5 V, Pin = 15 dBm, IDset = 40 mA (RF OFF) f = 900 MHz, VDS = 7.5 V, Pin = 17 dBm, IDset = 40 mA (RF OFF) No Destroy - - - - 33.0 0.36 74 73 - - - - dBm A % % - - - - - 25.8 32.2 0.35 62 60 - - - - - dB dBm A % % - 18.3 - dB Pin = 0 dBm These characteristics values are measurement using measurement tools especially by RENESAS. Pin = -5 dBm Pin = 7 dBm Remark DC performance is 100% testing. RF performance is testing several samples per wafer. The wafer rejection criterion for standard devices is 1 reject for several samples. R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Page 2 of 14 NE5550234 TEST CIRCUIT SCHEMATIC FOR 460 MHz VGS VDS R1 C1 L1 C1 IN 50 OUT C10 L10 C11 L11 L20 C12 C22 C20 NE5550234 50 C21 COMPONENTS OF TEST CIRCUIT FOR MEASURING ELECTRICAL CHARACTERISTICS <R> Symbol C1 C10 C11 Value 1 F 27 pF 3.9 pF Type GRM31MR71H105KA88L GRM1882C1H270JA01 GRM1882C1H3R9CZ01 Maker Murata Murata Murata C12 C20 C21 C22 R1 18 pF 12 pF 1.5 pF 100 pF 4.7 k Murata Murata Murata Murata SSM L1 L10, L11 L20 PCB SMA Connecter 47.2 nH 12 nH 7.8 nH - - GRM1882C1H180JA01 GRM1882C1H120JA01 GRM1882C1H1R5CZ01 GRM2162C1H101JA01D 1/10 W Chip Resistor SSM_RG1608PB472 0.4 mm, D = 2 mm, 7 Turns LL1608-FS12NJ 0.4 mm, D = 1.4 mm, 3 Turns R1766, t = 0.8 mm, r = 4.8, size = 30 x 40 mm WAKA 01K0790-20 Ohesangyou TOKO Ohesangyou Panasonic WAKA COMPONENT LAYOUT OF TEST CIRCUIT FOR 460 MHz IN C10 C11 R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 VGS VDS C1 C1 R1 L10 L11 C12 L1 L20 C22 OUT C20 C21 Page 3 of 14 NE5550234 TYPICAL CHARACTERISTICS 1 (TA = 25C) RF: f = 460MHz, VDS = 3.6/4.5/6/7.5/9 V, IDset = 40 mA, Pin = -15 to 20 dBm IM: f1 = 460MHz, f2 = 461 MHz, VDS = 3.6/4.5/6/7.5/9 V, IDset = 40mA, Pout (2 tone) = 6 to 28 dBm OUTPUT POWER, DRAIN CURRENT vs. INPUT POWER 40 0.7 35 0.6 30 25 0.5 20 0.4 15 0.3 10 5 0 -20 -15 -10 -5 0 5 10 15 20 25 25 30 0.2 10 20 0.1 5 10 0.0 0 -20 -15 -10 -5 -40 -50 -60 10 15 20 25 30 5 10 15 20 25 0 IM3/IM5 vs. 2 TONES OUTPUT POWER 0 2f0 - 3.6 V 2f0 - 4.5 V 2f0 - 7.5 V 2f0 - 9 V 3f0 - 3.6 V 3f0 - 4.5 V 3f0 - 7.5V 3f0 - 9 V 2f0 - 6 V 3f0 - 6 V 5 0 Input Power Pin (dBm) -30 -70 0 50 15 3rd/5th Order Intermodulation Distortion IM3/IM5 (dBc) 2nd Harmonics 2f0 (dBc) 3rd Harmonics 3f0 (dBc) -20 60 40 2f0, 3f0 vs. OUTPUT POWER -10 70 20 Input Power Pin (dBm) 0 80 Gp - 3.6 V Gp - 4.5 V Gp - 7.5 V Gp - 9 V Gp - 6 V add - 3.6 V add - 4.5 V add - 7.5 V add - 9 V add - 6 V Power Added Efficiency add (%) Output Power Pout (dBm) 30 0.8 Power Gain GP (dB) 35 Pout - 3.6 V Pout - 4.5 V Pout - 7.5 V Pout - 9 V Pout - 6 V IDS - 3.6 V IDS - 4.5 V IDS - 7.5 V IDS - 9 V IDS - 6 V Drain Current IDS (A) 40 POWER GAIN, POWER ADDED EFFICIENCY vs. INPUT POWER 35 40 Output Power Pout (dBm) IM3 - 3.6 V IM3 - 4.5 V IM3 - 7.5 V IM3 - 9 V IM5 - 3.6 V IM5 - 4.5 V IM5 - 7.5 V IM5 - 9 V IM3 - 6 V IM5 - 6 V -10 -20 -30 -40 -50 -60 -70 0 5 10 15 20 25 30 2 Tones Output Power Pout (2 tone) (dBm) Remark The graphs indicate nominal characteristics. R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Page 4 of 14 NE5550234 TEST CIRCUIT SCHEMATIC FOR 157 MHz VGS VDS R1 C1 L1 C2 IN 50 OUT L10 C10 R10 NE5550234 C11 L11 C20 50 C22 C21 COMPONENTS OF TEST CIRCUIT FOR MEASURING ELECTRICAL CHARACTERISTICS <R> <R> Symbol C10 C11 Value 27 pF 6.8 pF Type GQM1882C1H270JB01 GQM1882C1H6R8DB01 Maker Murata Murata C20 C21 8.2 pF 27 pF GQM1882C1H8R2DB01 GQM1882C1H270JB01 Murata Murata C22 C1 C2 L10 L11 L1 R10 R1 PCB SMA Connecter 100 pF 1 F 1 F 100 nH 47 nH 74 nH 5.6 4.7 k - - GQM1882C1H101JB01 GRM21BB31H105KA2L GRM21BB31H105KA2L LL1608-FSLR10J D20-47N2 D20-74N7 MCR03J5R6 MCR03J472 R1766, t = 0.8 mm, r = 4.8, size = 30 x 40 mm WAKA 01K0790-20 R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Murata Murata Murata Toko Ohesangyou Ohesangyou Rohm Rohm Panasonic WAKA Page 5 of 14 NE5550234 COMPONENT LAYOUT OF TEST CIRCUIT FOR 157 MHz VDS VGS C2 RF IN RF OUT C1 C10 C11 R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 L10 L1 R1 R10 C20 L11 C21 C22 Page 6 of 14 NE5550234 TYPICAL CHARACTERISTICS 2 (TA = 25C) RF: f = 157 MHz, VDS = 3.6/4.5/6/7.5/9 V, IDset = 40 mA, Pin = -10 to 20 dBm POWER GAIN, POWER ADDED EFFICIENCY vs. INPUT POWER 40 0.7 35 30 0.6 30 25 0.5 20 0.4 Output Power Pout (dBm) 35 15 10 5 0 -15 -10 -5 0 5 10 15 20 80 Gp - 3.6 V Gp - 4.5 V Gp - 6 V Gp - 7.5 V Gp - 9 V add - 3.6 V add - 4.5 V add - 6 V add - 7.5 V add - 9 V 70 60 25 50 20 40 15 30 0.2 10 20 0.1 5 10 0.3 IDS - 3.6 V IDS - 4.5 V IDS - 6 V IDS - 7.5 V IDS - 9 V Power Gain GP (dB) 0.8 Pout - 3.6 V Pout - 4.5 V Pout - 6.0 V Pout - 7.5 V Pout - 9 V Drain Current IDS (A) 40 0.0 25 Input Power Pin (dBm) 0 -15 -10 -5 0 5 10 15 20 Power Added Efficiency add (%) OUTPUT POWER, DRAIN CURRENT vs. INPUT POWER 0 25 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Page 7 of 14 NE5550234 TEST CIRCUIT SCHEMATIC FOR 900 MHz VGS VDS R1 C1 L1 C2 IN OUT 50 C10 NE5550234 L11 C20 C22 50 C21 L10 COMPONENTS OF TEST CIRCUIT FOR MEASURING ELECTRICAL CHARACTERISTICS <R> Symbol C10 C20 Value 10 pF 6.8 pF Type GQM1882C1H100JB01 GQM1882C1H6R8DB01 C21 C22 C1 C2 L10 L1 R1 PCB SMA Connecter 1 pF 100 pF 1 F 1 F 2.7 nH 74 nH 4.7 k - - GQM1884C2A1R0CB01 GQM1882C1H101JB01 GRM21BB31H105KA2L GRM21BB31H105KA2L LL1608-FSL2N7S D20-74N7 MCR03J472 R1766, t = 0.8 mm, r = 4.8, size = 30 x 40 mm WAKA 01K0790-20 R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Maker Murata Murata Murata Murata Murata Murata Toko Ohesangyou Rohm Panasonic WAKA Page 8 of 14 NE5550234 COMPONENT LAYOUT OF TEST CIRCUIT FOR 900 MHz VDS VGS C2 RF IN C1 R1 C10 L10 R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 RF OUT L1 C22 C20 C21 Page 9 of 14 NE5550234 TYPICAL CHARACTERISTICS 3 (TA = 25C) f = 900 MHz, VDS = 3.6/4.5/6/7.5/9 V, IDset = 40 mA, Pin = -10 to 20 dBm OUTPUT POWER, POWER ADDED EFFICIENCY vs. INPUT POWER Output Power Pout (dBm) 25 140 35 120 30 100 20 80 15 60 10 40 5 0 -15 -10 -5 0 5 10 15 20 25 25 Power Gain GP (dB) 30 Pout - 3.6 V Pout - 4.5 V Pout - 6.0 V Pout - 7.5 V Pout - 9 V add - 3.6 V add - 4.5 V add - 6.0 V add - 7.5 V add - 9 V Power Added Efficiency add (%) 35 POWER GAIN, DRAIN CURRENT vs. INPUT POWER 0.7 GP - 3.6 V GP - 4.5 V GP - 6 V GP - 7.5 V GP - 9 V IDS - 3.6 V IDS - 4.5 V IDS - 6.0 V IDS - 7.5 V IDS - 9 V 0.6 0.5 20 0.4 15 0.3 10 0.2 20 5 0.1 0 0 -15 -10 Input Power Pin (dBm) -5 0 5 10 15 20 25 Drain Current IDS (A) RF: 0 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Page 10 of 14 NE5550234 S-PARAMETERS S-parameters and noise parameters are provided on our web site in a form (S2P) that enables direct import of the parameters to microwave circuit simulators without the need for keyboard inputs. Click here to download S-parameters. [Products] [RF Devices] [Device Parameters] URL http://www.renesas.com/products/microwave/ R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Page 11 of 14 NE5550234 MOUNTING PAD LAYOUT DIMENSIONS 3-PIN POWER MINIMOLD (34 PKG) (UNIT: mm) 1.4 45 0.4 2.8 45 0.9 2.2 1.0 1.0 2.0 1.0 2.0 Remark The mounting pad layout in this document is for reference only. When designing PCB, please consider workability of mounting, solder joint reliability, prevention of solder bridge and so on, in order to optimize the design. R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Page 12 of 14 NE5550234 PACKAGE DIMENSIONS 3-PIN POWER MINIMOLD (34 PKG) (UNIT: mm) (Bottom View) (Side View) 4.50.1 1.50.1 0.8 MIN. 3 0.420.06 4.00.25 2 1 2.50.1 1.60.2 0.420.06 0.41+0.03 -0.06 0.470.06 1.5 3.0 PIN CONNECTIONS 1. Drain 2. Source 3. Gate R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Page 13 of 14 NE5550234 RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2% (Wt.) or below Condition Symbol IR260 Wave Soldering Peak temperature (molten solder temperature) : 260C or below Time at peak temperature : 10 seconds or less Preheating temperature (package surface temperature) : 120C or below Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2% (Wt.) or below WS260 Partial Heating Peak temperature (terminal temperature) : 350C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2% (Wt.) or below HS350 CAUTION Do not use different soldering methods together (except for partial heating). R09DS0039EJ0300 Rev.3.00 Mar 12, 2013 Page 14 of 14 Revision History Rev. Date NE5550234 Data Sheet Description Summary Page 1.00 Apr 25, 2012 - 2.00 Jul 04, 2012 p.2 Modification of ELECTRICAL CHARACTERISTICS 3.00 Mar 12, 2013 P3 Modification of COMPONENTS OF TEST CIRCUIT FOR MEASURING ELECTRICAL CHARACTERISTICS P5 Modification of TEST CIRCUIT SCHEMATIC FOR 157 MHz P8 Modification of COMPONENTS OF TEST CIRCUIT FOR MEASURING ELECTRICAL CHARACTERISTICS First edition issued All trademarks and registered trademarks are the property of their respective owners. C-1 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. California Eastern Laboratories, Inc. 4590 Patrick Henry Drive, Santa Clara, California 95054, U.S.A. Tel: +1-408-919-2500, Fax: +1-408-988-0279 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-651-700, Fax: +44-1628-651-804 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2013 Renesas Electronics Corporation. All rights reserved. [Colophon 2.2]