SF-0603FP400-2 - BOURNS - Datasheet.Cloud

n Fast acting precision thin ﬁlm chip fuse for

overcurrent protection

n 1608 (EIA 0603) miniature footprint

n Surface mount packaging for automated

assembly

n UL listed (UL 248-14)

n RoHS compliant* and halogen free**

Electrical Characteristics

SF-0603FP Series - Fast Acting Precision Surface Mount Fuses

Model Rated Current

(Amps) Fusing Time Resistance

(mΩ) *** Rated Voltage Breaking Capacity Typical

I2t (A2s) ****

SF-0603FP050 0.50

Open within 5 sec.

at 200 % rated

current

260 DC 50 V DC 50 V

50 A 0.0088

SF-0603FP063 0.63 218

AC 32 V

DC 32 V

AC 32 V 50 A

DC 32 V 50 A

0.0125

SF-0603FP080 0.80 132 0.0206

SF-0603FP100 1.00 84.5 0.0211

SF-0603FP125 1.25 63 0.0472

SF-0603FP150 1.50 50.5 0.0623

SF-0603FP160 1.60 46 0.0817

SF-0603FP200 2.00 32 0.1176

SF-0603FP250 2.50 25.5 0.1807

SF-0603FP300 3.00 20 0.3177

SF-0603FP315 3.15 19 0.3615

SF-0603FP400 4.00 13 0.5348

SF-0603FP500 5.00 10 0.7726

SinglFuse™ SF-0603FP Series Features

*** Resistance value measured with less than 10 % of rated current. Tolerance ±25 %.

****Typical I2t value measured at 10x rated current.

Reliability Testing

No. Test Requirement Test Condition

1 Carrying Capacity No fusing Rated current, 4 hours

2Fusing Time Within 5 seconds 200 % of its rated current

3Interrupting Ability No mechanical damages After the fuse is interrupted, rated voltage applied

for 30 seconds again

4Bending Test No mechanical damages Distance between holding points: 90 mm,

Bending: 3 mm,1 time, 30 seconds

5 Resistance to Solder Heat ±20 % 260 °C ±5 °C,10 seconds ±1 second

6 Solderability 95 % coverage minimum 235 °C ±5 °C, 2 ±0.5 second

245 °C ±5 °C, 2 ±0.5 second (lead free)

7 Temperature Rise <75 ° C 100 % of its rated current, measure of surface

temperature

8 Resistance to Dry Heat ±20 % 105 °C ±5 °C,1000 hours

9 Resistance to Solvent No evident damage on protective coating

and marking 23 °C ±5 °C of isopropyl alcohol, 90 seconds

10 Residual Resistance 10k ohms or more Measure DC resistance after fusing

11 Thermal Shock DR < 10 % -20 °C / +25 °C /+125 °C /+25 °C, 10 cycles

Operating Temperature .......................................-20 °C to +105 °C

Storage Conditions

Temperature .....................................................+5 °C to +35 °C

Humidity................................................................40 % to 75 %

Shelf Life................................ 2 years from manufacturing date

Moisture Sensitivity Level ............................................................. 1

ESD Classication (HBM)...................................................Class 6

Environmental Characteristics

WARNING Cancer and Reproductive Harm

www.P65Warnings.ca.gov

* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU

June 8, 2011.

** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or

less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and

Chlorine (Cl) content is 1500 ppm or less.

“SinglFuse” is a trademark of Bourns, Inc.

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth

on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

UL File Number ............................................................... E198545

Agency Recognition

n Portable memory

n LCD monitors

n Disk drives

n PDAs

n Digital cameras

n DVDs

n Cell phones

n Rechargeable battery packs

n Battery chargers

n Set top boxes

n Industrial controllers

SF-0603FP Series - Fast Acting Precision Surface Mount Fuses

Solder Reow Recommendations

Peak: 250 +0/-5 °C

230 °C or higher

PRE-HEATING ZONE

SOLDERING ZONE

HEATING TIME

180 °C

PEAK: 250 +0/-5 °C, 5 seconds

PRE-HEATING ZONE: 150 to 180 °C, 90 ± 30 seconds

SOLDERING ZONE: 230 °C or higher, 30 ± 10 seconds

250

200

150

TEMPERATURE (°C)

100

150 °C

90 ± 30 Seconds

30 ± 10 Seconds

Peak: 250 +0/-5 °C

230 °C or higher

PRE-HEATING ZONE

SOLDERING ZONE

HEATING TIME

180 °C

PEAK: 250 +0/-5 °C, 5 seconds

PRE-HEATING ZONE: 150 to 180 °C, 90 ± 30 seconds

SOLDERING ZONE: 230 °C or higher, 30 ± 10 seconds

250

200

150

TEMPERATURE (°C)

100

150 °C

90 ± 30 Seconds

30 ± 10 Seconds

Product Dimensions Recommended Pad Layout

DIMENSIONS: MM

(INCHES)

Thermal Derating Curve

120

110

100

-20 02040

AMBIENT TEMPERATURE (°C)

PERCENT OF RATING (%)

60 80 100 120

Construction & Material Content

OVERCOAT

Sn PLATING

CERAMIC SUBSTRATE

FUSE ELEMENT Cu / Ni PLATING

1.6 ± 0.1

(.063 ± .004)

0.3 ± 0.2

(.012 ± .008)

0.3 ± 0.2

(.012 ± .008)

0.35 ± 0.2

(.014 ± .008)

0.35 ± 0.2

(.014 ± .008)

0.45 ± 0.1

(.018 ± .004)

0.8 ± 0.1

(.031 ± .004)

0.8 ± 0.1

(.031 ± .004)

2.1 ± 0.1

(.083 ± .004)

0.9 ± 0.1

(.035 ± .004)

1.6 ± 0.1

(.063 ± .004)

0.3 ± 0.2

(.012 ± .008)

0.3 ± 0.2

(.012 ± .008)

0.35 ± 0.2

(.014 ± .008)

0.35 ± 0.2

(.014 ± .008)

0.45 ± 0.1

(.018 ± .004)

0.8 ± 0.1

(.031 ± .004)

0.8 ± 0.1

(.031 ± .004)

2.1 ± 0.1

(.083 ± .004)

0.9 ± 0.1

(.035 ± .004)

1.6 ± 0.1

(.063 ± .004)

0.3 ± 0.2

(.012 ± .008)

0.3 ± 0.2

(.012 ± .008)

0.35 ± 0.2

(.014 ± .008)

0.35 ± 0.2

(.014 ± .008)

0.45 ± 0.1

(.018 ± .004)

0.8 ± 0.1

(.031 ± .004)

0.8 ± 0.1

(.031 ± .004)

2.1 ± 0.1

(.083 ± .004)

0.9 ± 0.1

(.035 ± .004)

SinglFuse™ SF-0603FP Series Applications

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

5,000 pieces per 7-inch reel

Packaging Quantity

SF-0603FP Series - Fast Acting Precision Surface Mount Fuses

Average Time Current Curves Minimum I2T V Clear Time Curves

REV. D 01/19

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Typical Part Marking

Represents total content. Layout may vary.

How to Order

SF - 0603 FP 050 - 2

SinglFuse™

Product Designator

SMD Footprint

1608 (EIA 0603) size

Fuse Blow Type

FP = Fast acting precision

Rated Current

050-500 (500 mA - 5.00 A)

Packaging Type

- 2 = Tape & Reel (5,000 pcs./reel)

RATED CURRENT (A)

F = 0.50

I = 0.63

K = 0.80

L = 1.00

M = 1.25

P = 1.50

N = 1.60

S = 2.00

T = 2.50

3 = 3.00

U = 3.15

W = 4.00

Y = 5.00

1.50 A

1.25 A

100

0.1

0.01

1.50 A

1.25 A

1.00 A

0.80 A

0.63 A

0.50 A

1.60 A

2.00 A

2.50 A

3.00 A

3.15 A

4.00 A

5.00 A

0.001

0.1 1

CURRENT (A)

100

CLEARING TIME (S)

4.00 A

3.15 A

3.00 A

2.50 A

2.00 A

1.60 A

1.00 A

0.80 A

0.63 A

0.50 A

100

0.1

0.01

5.00 A

0.001

0.001 0.01 0.1 1

CLEARING TIME (S)

JOULE INTEGRAL (A2 SEC)

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

 SF-0603FPSeriesTapeandReelSpecications

SF-0603FP Series

Tape Dimensions per EIA 481-2

W 8.0 ± 0.2

(.315 ± .008)

4.0 ± 0.1

(.157 ± .004)

4.0 ± 0.1

(.157 ± .004)

2.0 ± 0.05

(.079 ± .002)

A 1.1 ± 0.1

(.043 ± .004)

B 1.9 ± 0.1

(.075 ± .004)

F 3.5 ± 0.05

(.138 ± .002)

E 1.75 ± 0.1

(.069 ± .004)

1.5 + 0.1/-0

(.059 + .004/-0)

T 0.64 ± 0.1

(.025 ± .004)

Reel Dimensions

A 180 +0/-3.0

(7.087 +0/-.118)

B Min. 60.0

(2.362)

C 13.0 ± 1.0

(.512 ± .039)

W 9.0 ± 1.0

(.354 ± .039)

T 11.4 ± 2.0

(.449 ± .079)

POE

DIRECTION OF UNREELING

C DIA.

DIA.

TOP

TAPE

BOTTOM

TAPE

PAPER

TAPE

RESISTOR

TAPE P2

DIMENSIONS: MM

(INCHES)

Legal Disclaimer Notice

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and

(32 ?+( 3$2".++$"3(5$+8:.41-2;

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change

6(3'.43-.3("$2$122'.4+#"'$"*%.1 -#.!3 (-3'$+ 3$231$+$5 -3(-%.1, 3(.- -#5$1(%83' 324"'(-%.1, 3(.-(2"411$-3

and complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and

statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical

requirements in generic applications. The characteristics and parameters of a Bourns®/1.#4"3(- 42$1 //+(" 3(.-, 85 18

%1.,3'$# 3 2'$$3"' 1 "3$1(23("2 -#/ 1 ,$3$12#4$3.(3'$".,!(- 3(.-.%3'$.41-2® product with other components

(-3'$42$1<2 //+(" 3(.-.1((3'$$-5(1.-,$-3.%3'$42$1 //+(" 3(.-(32$+%'$"' 1 "3$1(23("2 -#/ 1 ,$3$12.% .41-2®

/1.#4"3 +2." - -##.5 18(-#(>$1$-3 //+(" 3(.-2 -# "34 +/$1%.1, -"$, 85 18.5$13(,$2$122'.4+# +6 825$1(%8

the actual performance of the Bourns®/1.#4"3(-3'$(12/$"(="#$5("$2 -# //+(" 3(.-2 -#, *$3'$(1.6-(-#$/$-#$-3

)4#&,$-321$& 1#(-&3'$ ,.4-3.% ##(3(.- +3$23, 1&(-3.#$2(&-(-3.3'$(1#$5("$.1 //+(" 3(.-3.".,/$-2 3$%.1

#(>$1$-"$2!$36$$-+ !.1 3.18 -#1$ +6.1+#".-#(3(.-2

-+$22.41-2' 2$7/+("(3+8#$2(&- 3$# -(-#(5(#4 +.41-2® product as meeting the requirements of a particular industry

23 -# 1#$&.1 / 13("4+ 104 +(=" 3(.-$&+(23$#.11$".&-(9$#.41-2(2-.31$2/.-2(!+$%.1 -8

% (+41$.% -(-#(5(#4 +.41-2®/1.#4"33.,$$33'$1$04(1$,$-32.%24"'(-#4231823 -# 1#.1/ 13("4+ 104 +(=" 3(.-2$12

of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to

3'$(1#$5("$2.1 //+(" 3(.-2

Bourns®/1.#4"32 1$-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$#%.142$(--4"+$ 1+(%$2 5(-&+(%$"1(3(" +.1+(%$2423 (-(-&

//+(" 3(.-2-.1(- -8.3'$1 //+(" 3(.-26'$1$% (+41$.1, +%4-"3(.-, 81$24+3(-/$12.- +(-)418#$ 3'.12$5$1$/1./$138

.1$-5(1.-,$-3 +# , &$-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2

on a case-by-case basis, use of any Bourns®/1.#4"32(-24"'4- 43'.1(9$# //+(" 3(.-2,(&'3-.3!$2 %$ -#3'42(2 3

3'$42$1<22.+$1(2*(%$"1(3(" + //+(" 3(.-2(-"+4#$#$5("$2(#$-3(=$#!83'$..# -#14&#,(-(231 3(.- 2+ 22

#$5("$2 -#&$-$1 ++8$04(5 +$-3"+ 22(=" 3(.-2.432(#$.%3'$-(3$#3 3$2

.41-2$7/1$22+8(#$-3(=$23'.2$.41-2®23 -# 1#/1.#4"323' 3 1$24(3 !+$%.142$(- 43.,.3(5$ //+(" 3(.-2.-24"'

/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836.

43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2®23 -# 1#/1.#4"32(- - 43.,.3(5$

//+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 33'$42$1<22.+$1(2*%.41-2

$7/1$22+8(#$-3(=$2 24!" 3$&.18.% 43.,.3(5$ //+(" 3(.-(-3'$# 3 2'$$3%.1(3223 -# 1#/1.#4"3224"' 2(-%.3 (-,$-3

.1+(&'3(-&24"'(#$-3(=" 3(.-,$ -23' 3.41-2' 21$5($6$#(3223 -# 1#/1.#4"3 -#' 2#$3$1,(-$#3' 3(%24"'.41-2®

23 -# 1#/1.#4"3(2".-2(#$1$#%.1/.3$-3( +42$(- 43.,.3(5$ //+(" 3(.-2(32'.4+#.-+8!$42$#(-24"'24!" 3$&.18.%

43.,.3(5$ //+(" 3(.-2-81$%$1$-"$3..41-2®23 -# 1#/1.#4"3(-3'$# 3 2'$$3 2".,/+( -36(3'3'$23 -# 1#

.1: 43.,.3(5$&1 #$;#.$2-.3!8(32$+%,$ -3' 3.41-2' 2 //1.5$#24"'/1.#4"3%.142$(- - 43.,.3(5$ //+(" 3(.-

Bourns®23 -# 1#/1.#4"32 1$-.33$23$#3.".,/+86(3'-(3$#3 3$2$#$1 +5( 3(.-#,(-(231 3(.-23 -# 1#2&$-$1 ++8

.1 -8.3'$1&$-$1 ++8$04(5 +$-3&.5$1-,$-3 +.1& -(9 3(.-23 -# 1# //+(" !+$3./1.#4"32#$2(&-$#.1, -4% "341$#%.1

42$(- (1"1 %3.12/ "$ //+(" 3(.-2.41-2$7/1$22+8(#$-3(=$2.41-2® standard products that are suitable for use in aircraft

.12/ "$ //+(" 3(.-2.-24"'/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8

//1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2® standard

/1.#4"3(- - (1"1 %3.12/ "$ //+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 3

the user’s sole risk.

'$42$ -#+$5$+.%3$23(-& //+(" !+$3..41-2® custom products shall be negotiated on a case-by-case basis by Bourns

and the user for which such Bourns®"423.,/1.#4"32 1$2/$"( ++8#$2(&-$#!2$-3 61(33$- &1$$,$-3!$36$$-.41-2

-#3'$42$11$& 1#(-&3'$42$ -#+$5$+.%24"'3$23(-&3'$ !.5$/1.5(2(.-2 //+(" !+$3..41-2® standard products shall

also apply to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns®/1.#4"32.13$"'-.+.&8%.142$(- "3(5(3($26'("'(-5.+5$3'$

#$2(&-#$5$+./,$-3/1.#4"3(.-42$.123."*/(+(-&.%-4"+$ 1"'$,(" +.1!(.+.&(" +6$ /.-2.1,(22(+$2-.12' ++3'$842$

Bourns®/1.#4"32.13$"'-.+.&8(- -8% "(+(386'("'$-& &$2(- "3(5(3($21$+ 3(-&3.24"'#$5("$2'$%.1$&.(-&1$231("3(.-2

//+83. ++42$2 -# //+(" 3(.-23' 35(.+ 3$- 3(.- +.1(-3$1- 3(.- +/1.'(!(3(.-2(-"+4#(-&$,! 1&.2.1(-3$1- 3(.- +

1$&4+ 3(.-2413'$1.41-2® products and Bourns technology and technical data may not under any circumstance be

exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without

/1(.1 43'.1(9 3(.-%1.,.41-2 -#.13'$.5$1-,$-3!$1$2.+#31 -2%$11$#.11$$7/.13$#3. -8/ 138-.3$+(&(!+$

3.1$"$(5$".,,.#(3($22.%36 1$ -#3$"'-(" +# 3 

.3'$, 7(,4,$73$-3/$1,(33$#!8 //+(" !+$+ 6.41-2#(2"+ (,2( -8 -# +++( !(+(38%.12/$"( +/4-(3(5$".-2$04$-3( +

(-"(#$-3 +.1(-#(1$"3# , &$2.1+.231$5$-4$2.1+.23/1.=32 -#(( -8 -# ++(,/+($#6 11 -3($2(-"+4#(-&(,/+($#6 11 -3($2

.%=3-$22%.1/ 13("4+ 1/41/.2$-.-(-%1(-&$,$-3 -#,$1"' -3 !(+(38

 

bilingual versions are available at:

Web Page:

http://www.bourns.com/legal/disclaimers-terms-and-policies

PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf

