MCT62.3SD - Fairchild Semiconductor Corporation

DESCRIPTION

The MCT6X Optocouplers have two channels for density applica-

tions. For four channel applications, two-packages fit into a standard

16-pin DIP socket. Each channel is an NPN silicon planar phototran-

sistor optically coupled to a gallium arsenide infrared emitting diode.

FEATURES

• Two isolated channels per package

• Two packages fit into a 16 lead DIP socket

• Choice of three current transfer ratios

• Underwriters Laboratory (U.L.) recognized File E90700

APPLICATIONS

• AC Line/Digital Logic - isolate high voltage transients

• Digital Logic/Digital Logic - Eliminate spurious grounds

• Digital Logic/AC Triac Control - isolate high voltage transients

• Twisted pair line receiver - Eliminate ground loop feedthrough

• Telephone/Telegraph line receiver - isolate high voltage transients

• High Frequency Power Supply Feedback Control - Maintain floating

grounds and transients

• Relay contact monitor - isolate floating grounds and transients

• Power supply monitor - Isolate transients

DUAL

PHOTOTRANSISTOR OPTOCOUPLERS

EMITTER

COLLECTOR

ANODE

CATHODE

4 5

EMITTER

COLLECTOR

ANODE

CATHODE

Equivalent Circuit

Rating Symbol Value Unit

EMITTER (Each channel)

Forward Current - Continuous IF60 mA

Forward Current - Peak (PW = 1µs, 300pps) IF(pk) 3A

Reverse Voltage VR3.0 V

LED Power Dissipation @ TA= 25°CPD

100 mW

Derate above 25°C (Total Input) 1.3 mW/°C

DETECTOR (Each channel) IC30 mA

Collector Current - Continuous

Detector Power Dissipation @ TA = 25°CPD

150 mW

Derate above 25°C 2.0 mW/°C

TOTAL DEVICE TSTG -55 to +150 °C

Storage Temperature

Operating Temperature TOPR -55 to +100 °C

Lead Solder Temperature TSOL 250 for 10 sec °C

Total Device Power Dissipation @ TA = 25°CPD

400 mW

Derate above 25°C 5.33 mW/°C

ABSOLUTE MAXIMUM RATINGS

SCHEMATIC

MCT6 MCT61 MCT62

 2001 Fairchild Semiconductor Corporation

DS300245 2/26/01 1 OF 7 www.fairchildsemi.com

Parameter Test Conditions Symbol Min Typ** Max Unit

EMITTER (IF= 20 mA) VF1.2 1.5 V

Input Forward Voltage

Reverse Voltage (IR= 10 µA) VR3.0 25 V

Reverse Current (VR= 5 V) IR0.001 10 µA

Junction Capacitance (VF= 0 V, f = 1 MHz) CJ50 pF

DETECTOR (IC= 1.0 mA, IF= 0) BVCEO 30 85 V

Collector-Emitter Breakdown Voltage

Emitter-Collector Breakdown Voltage (IE= 100 µA, IF= 0) BVECO 613 V

Collector-Emitter Dark Current (VCE = 10 V, IF= 0) ICEO 5 100 nA

Capacitance (VCE = 0 V, f = 1 MHz) CCE 8pF

INDIVIDUAL COMPONENT CHARACTERISTICS

ELECTRICAL CHARACTERISTICS (TA= 25°CUnless otherwise specified.)

DC Characteristic Test Conditions Symbol Min Typ** Max Units

Current Transfer Ratio, Collector-Emitter (IF= 10 mA, VCE = 10 V) 20

MCT6 CTR %

MCT61 (IF= 5 mA, VCE = 5 V) 50

MCT62 100

Saturation Voltage (IF= 16 mA, IC= 2 mA) VCE(sat) 0.15 0.40 V

TRANSFER CHARACTERISTICS

AC Characteristic Test Conditions Symbol Min Typ** Max Units

SWITCHING TIMES (RL= 100 1, IC= 2 mA, VCC = 10 V) ton 2.4 µs

Non-Saturated Turn-on Time

Non-Saturated Turn-off Time (RL= 100 1, IC= 2 mA, VCC = 10 V) toff 2.4 µs

TRANSFER CHARACTERISTICS

Characteristic Test Conditions Symbol Min Typ** Max Units

Input-Output Isolation Voltage (II-O 61 µA, 1 min.) VISO 5300 Vac(rms)

Isolation Resistance (VI-O = 500 VDC) RISO 1011 1

Isolation Capacitance (f = 1 MHz) CISO 0.5 pf

ISOLATION CHARACTERISTICS

** All typicals at TA= 25°C

DUAL

PHOTOTRANSISTOR OPTOCOUPLERS

MCT6 MCT61 MCT62

www.fairchildsemi.com 2 OF 7 2/26/01 DS300245

Normalized CTR vs. Forward Current

IF - FORWARD CURRENT (mA)

0 5 10 15 20

NORMALIZED CTR

0.0

0.2

0.4

0.6

1.0

1.2

1.4

VCE = 5.0V

TA = 25˚C

Normalized to

IF = 10 mA

Normalized CTR vs. Ambient Temperature

-75 -50 -25 0 25 50 75 100 125

NORMALIZED CTR

0.4

0.6

0.8

1.0

1.2

1.4

1.6

Normalized to

IF = 10 mA

TA = 25˚C

IF = 10 mA

IF = 20 mA

TA - AMBIENT TEMPERATURE (˚C)

IF = 5 mA

Dark Current vs. Ambient Temperature

TA - AMBIENT TEMPERATURE (˚C)

0 25 50 75 100 125

ICEO - COLLECTOR-EMITTER DARK CURRENT (µA)

-6

-5

-4

-3

-2

-1

VCE = 10 V

DUAL

PHOTOTRANSISTOR OPTOCOUPLERS

MCT6 MCT61 MCT62

DS300245 2/26/01 3 OF 7 www.fairchildsemi.com

Switching Speed vs. Load Resistor

R-LOAD RESISTOR (kΩ)

0.1 1 10 100

SWITCHING SPEED - (µs)

0.1

100

1000

Toff

Ton

IF = 10 mA

VCC = 10 V

TA = 25˚C

Collector-Emitter Saturation Voltage vs Collector Current

IC - COLLECTOR CURRENT (mA)

VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)

0.01 0.1 1 10

0.001

0.01

0.1

100

IF = 20 mA

IF = 2.5 mA

IF = 10 mA

IF = 5 mA

TA = 25˚C

IF - LED FORWARD CURRENT (mA)

VF - FORWARD VOLTAGE (V)

LED Forward Voltage vs. Forward Current

1 10 100

1.0

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

TA = 25˚C

TA = 55˚C

TA = 100˚C

DUAL

PHOTOTRANSISTOR OPTOCOUPLERS

MCT6 MCT61 MCT62

www.fairchildsemi.com 4 OF 7 2/26/01 DS300245

NOTE

All dimensions are in inches (millimeters)

Package Dimensions (Surface Mount)

Lead Coplanarity : 0.004 (0.10) MAX

0.270 (6.86)

0.250 (6.35)

0.390 (9.91)

0.370 (9.40)

0.022 (0.56)

0.016 (0.41)

0.100 (2.54)

TYP

0.020 (0.51)

MIN

0.070 (1.78)

0.045 (1.14)

0.300 (7.62)

TYP

0.405 (10.30)

MIN

0.315 (8.00)

MIN

0.045 [1.14]

32 14

5678

PIN 1

ID.

0.016 (0.41)

0.008 (0.20)

Package Dimensions (Through Hole)

0.200 (5.08)

0.140 (3.55)

0.100 (2.54) TYP

0.022 (0.56)

0.016 (0.41)

0.020 (0.51) MIN

0.390 (9.91)

0.370 (9.40)

0.270 (6.86)

0.250 (6.35)

PIN 1

ID.

0.070 (1.78)

0.045 (1.14)

241

56 78

0.300 (7.62)

TYP

0.154 (3.90)

0.120 (3.05)

0.016 (0.40)

0.008 (0.20)

15° MAX

SEATING PLANE

Package Dimensions (0.4”Lead Spacing)

0.200 (5.08)

0.140 (3.55)

0.100 (2.54) TYP

0.022 (0.56)

0.016 (0.41)

0.004 (0.10) MIN

0.390 (9.91)

0.370 (9.40)

0.270 (6.86)

0.250 (6.35)

0.070 (1.78)

0.045 (1.14)

241

56 78

0.400 (10.16)

TYP

0.154 (3.90)

0.120 (3.05)

0.016 (0.40)

0.008 (0.20)

0° to15°

PIN 1

ID.

SEATING PLANE

DUAL

PHOTOTRANSISTOR OPTOCOUPLERS

MCT6 MCT61 MCT62

8 - Pin Dip

0.070 (1.78)

0.060 (1.52)

0.030 (0.76)

0.100 (2.54)

0.295 (7.49)

0.415 (10.54)

DS300245 2/26/01 5 OF 7 www.fairchildsemi.com

4.0 ± 0.1

Ø1.55 ± 0.05

User Direction of Feed

4.0 ± 0.1

1.75 ± 0.10

7.5 ± 0.1

16.0 ± 0.3

12.0 ± 0.1

0.30 ± 0.05

13.2 ± 0.2

4.90 ± 0.20

0.1 MAX 10.30 ± 0.20

10.30 ± 0.20

Ø1.6 ± 0.1

QT Carrier Tape Specifications (“D” Taping Orientation)

ORDERING INFORMATION

S .S Surface Mount Lead Bend

SD .SD Surface Mount; Tape and reel

W .W 0.4” Lead Spacing

300 .300 VDE 0084

300W .300W VDE 0084 and 0.4” Lead Spacing

3S .3S VDE 0084 and Surface Mount Lead Bend

3SD .3SD VDE 0084 and Surface Mount Lead Bend Tape and Reel

Order

Entry

Option Identifier Description

DUAL

PHOTOTRANSISTOR OPTOCOUPLERS

MCT6 MCT61 MCT62

www.fairchildsemi.com 6 OF 7 2/26/01 DS300245

DUAL

PHOTOTRANSISTOR OPTOCOUPLERS

MCT6 MCT61 MCT62

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO

ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME

ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED

HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF

OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD

SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or

systems which, (a) are intended for surgical

implant into the body,or (b) support or sustain life,

and (c) whose failure to perform when properly

used in accordance with instructions for use provided

in labeling, can be reasonably expected to result in a

significant injury of the user.

2. A critical component in any component of a life support

device or system whose failure to perform can be

reasonably expected to cause the failure of the life

support device or system, or to affect its safety or

effectiveness.

DS300245 2/26/01 7 OF 7 www.fairchildsemi.com